This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Realization of Dual Phase High Temperature Heat Release Combustion of Base Gasoline Blends from Oil Refineries and a Study of HCCI Combustion Processes
Journal Article
2009-01-0298
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Citation:
Shibata, G. and Urushihara, T., "Realization of Dual Phase High Temperature Heat Release Combustion of Base Gasoline Blends from Oil Refineries and a Study of HCCI Combustion Processes," SAE Int. J. Engines 2(1):145-163, 2009, https://doi.org/10.4271/2009-01-0298.
Language:
English
References
- Shibata, G. Urushihara, T. “Dual Phase High Temperature Heat Release Combustion,” SAE Int. J. Engines 1 1 1 12 2008
- Kalghatgi, G. “Fuel Anti-Knock Quality-Part I, Engine studies” SAE Technical Paper, No. 2001-01-3584 2001
- Kalghatgi, G. “Fuel Anti-knock Quality-Part II, Vehicle Studies-How Relevant is Motor Octane Number (MON) in Modern Engines?” SAE Technical Paper No. 2001-01-3585 2001
- Kalghatgi, G. Risberg, P. Angstrom, H. “A Method of Defining Ignition Quality of Fuels in HCCI Engines” SAE Technical Paper, No. 2003-01-1816 2003
- Kalghatgi, G. Head, R. “The Available and Required Autoignition Quality of Gasoline-like Fuels in HCCI Engines at High Temperatures” SAE Technical Paper, No. 2004-01-1969 2004
- Risberg, P. Kalghatgi, G. Angstrom, H. “The Influence of EGR on Auo-ignition Quality of Gasoline-like Fuels in HCCI Engines” SAE Technical Paper, No. 2004-01-2952 2004
- Shibata, G. Oyama, K. Urushihara, T. Nakano, T. “The Effect of Fuel Properties on Low and High Temperature Heat Release and Resulting Performance of an HCCI Engine” SAE Technical Paper, No. 2004-01-0553 2004
- Shibata, G. Oyama, K. Urushihara, T. Nakano, T. “Correlation of Low Temperature Heat Release with Fuel Composition and HCCI Engine Combustion” SAE Technical Paper, No. 2005-01-0138 2005
- Shibata, G. Urushihara, T. “The Interaction Between Fuel Chemicals and HCCI Combustion Characteristics Under Heated Intake Air Conditions” SAE Technical Paper, No. 2006-01-0207 2006
- Shibata, G. Urushihara, T. “Auto-Ignition Characteristics of Hydrocarbons and Development of HCCI Fuel Index” SAE Technical Paper, No. 2007-01-0220 2007
- Shibata, G. HCCI symposium San Ramon, USA 2006
- Shibata, G. HCCI symposium Lund, Sweden 2007
- Shibata, G. Oyama, K. Urushihara, T. Nakano, T. “The Effect of Fuel Properties on HCCI Engine Combustion Characteristics and Performance” IFP International Conference 2004
- Aroonsrisopon, T. Foster, D. Morikawa, T. Iida, M. “Comparison of HCCI Operating Range for Combinations of Intake Temperature, Engine Speed and Fuel Composition” SAE Technical Paper, No. 2002-01-1924 2002
- Westbrook, C. “Chemical Kinetics of Hydrocarbon Ignition in Practical Combustion Systems” Proceeding of the Combustion Institute 28 1563 1577 2000
- Tanaka, S. Ayala, F. Keck, J. “A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine” Combustion and Flame 133 467 481 2003
- Eng, J. Leppard, W. Sloane, T. “The Effect of POx on the Autoignition Chemistry of n-Heptane and Isooctane in an HCCI Engine” SAE Technical Paper, No. 2002-01-2861 2002
- Tezaki, A. “Diesel Combustion: Chemical Kinetics” JSAE Technical Paper, No. 20054246 2005
- Yamada, H. Yoshii, M. Tezaki, A. “A Chemical Mechanistic Analysis on Compression Ignition Process of Straight Chain Alkanes” SAE Technical Paper, No. 2004-01-1912 2004
- Ogawa, H. Miyamoto, N. Kaneko, N. Ando, H. “Combustion Control and Operating Range Expansion in an HCCI engine with Selective Use of Fuels with Different Low-Temperature Oxidation Characteristics” SAE Technical Paper, No. 2003-01-1827 2003
- Ogawa, H. Miyamoto, N. Kaneko, N. Ando, H. “Combustion Control and Operating Range Expansion in an HCCI Engine with Reaction Inhibitors” International Journal of Engine Research IMechE 6 342 359 2005
- Yamada, H. Yoshii, M. Tezaki, A. “Chemical mechanistic analysis of additive effects in homogeneous charge compression ignition of dimethyl ether” Proceedings of the Combustion Institute 30 2005 2773 2780
- Yamada, H. Ohtomo, M. Yoshii, M. Tezaki, A. “Controlling mechanism of ignition enhancing and suppressing additives in premixed compression ignition” Int. J. Engine Res 6 331 340 IMechE 2005
- Opat, R. Ra, Y. Gonzalez, M. Krieger, R. Reits, R. Foster, D. Durrett, R. Siewert, R. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine” SAE Technical Paper, No. 2007-01-0193 2007
- Berntsson, A. Denbratt, I. “HCCI Combustion Using Charge Stratification for Combustion Control” SAE Technical Paper, No. 2007-01-0210 2007
- Dec, J. Hwang, W. Sjoberg, M. “An Investigation of Thermal Stratification in HCCI engines Using Chemiluminescence Imaging” SAE Technical Paper, No. 2006-01-1518 2006
- Dec, J. Sjoberg, M. “Isolating the Effects of Fuel Chemistry on Combustion Phasing in an HCCI Engine and the Potential of Fuel Stratification for Ignition Control” SAE Technical Paper, No. 2004-01-0557 2004
- Sjoberg, M. Dec, J. “Smoothing HCCI Heat-Release Rates Using Partial Fuel Stratification with Two-Stage Ignition Fuels” SAE Technical Paper, No. 2006-01-0629 2006
- Cao, L. Zhao, H. Jiang, X. Kalian, N. “Investigation into the Effect of Injection Timing on Stoichiometric and Lean CAI Operations in a 4-Stroke GDI Engine” SAE Technical Paper, No. 2006-01-0417 2006
- Silke, E.J. Pitz, W.J. Westbrook, C.K. Sjöberg, M. et al. “Understanding the Chemical Effects of Increased Boost Pressure under HCCI Conditions,” SAE Int. J. Fuels Lubr. 1 1 12 25 2008
- Hessel, R. Aceves, S. Flowers, D. “A Comparison of the Effect of Combustion Chamber Surface Area and In-Cylinder Turbulence on the Evolution of Gas Temperature Distribution From IVC to SOC: A Numerical and Fundamental Study” SAE Technical Paper, No. 2006-01-0869 2006
- Yu, R. Bai, X. Vressner, A. Hultqvist, A. Johansson, B. Olofsson, J. Seyfried, H. Sjoholm, J. Richter, M. Alden, M. “Effect of Turbulence on HCCI Combustion” SAE Technical Paper, No. 2007-01-0183 2007
- Persson, H. Hulqvist, A. Johansson, B. Remon, A. “Investigation of the Early Flame Development in Spark Assisted HCCI Combustion Using High Speed Chemiluminescence Imaging” SAE Technical Paper, No. 2007-01-0212 2007
- Matsuda, T. Wada, H. Kono, T. Nakamura, T. Urushihara, T. “A Study of a Gasoline-Fueled HCCI Engine - Mode Changes from SI Combustion to HCCI Combustion-” SAE Technical Paper, No. 2008-01-0050 2008
- Bunting, B. “Combustion, Control, and Fuel Effects in a Spark Assited HCCI Engine Equipped with Variable Valve Timing” SAE Technical Paper, No. 2006-01-0872 2006
- Cao, L. Zhao, H Jiang, X. “Investigation into Controlled Auto-Ignition Combustion in a GDI Engine with Single and Split fuel Injections” SAE Technical Paper, No. 2007-01-0211 2007
- Li, Y. Zhao, H. Brouzos, N. Ma, T. “Parametric Study on CAI Combustion in a GDI Engine with an Air-Assisted Injector” SAE Technical Paper, No. 2007-01-0196 2007
- Inagaki, K. Fuyuto, T. Nishikawa, K. Nakakita, K. Sakata, I. “Dual-Fuel PCI Combustion Controlled by In-Cylinder Stratification of Ignitability” SAE Technical Paper, No. 2006-01-0028 2006
- Tamagna, D. Gentili, R. Ra, Y. Reitz, R. “Multidimensional Simulation of the Influence of Fuel Mixture Composition and Injection Timing in Gasoline-Diesel Dual Fuel Applications” SAE Technical Paper, No. 2008-01-0031 2008
- Leppard, W. “A Comparison of Olefin and Paraffin Autoignition Chemistries: A Motored Engine Study” SAE Technical Paper No. 892081 1989
- Sjoberg, M. Dec, J. “Combined Effect of Fuel- Type and Engine Speed on Intake Temperature Requirement completeness of Bulk-Gas Reactions” SAE Technical Paper, No. 2003-01-3173 2003
- Sjöberg, M. Dec, J.E. “Influence of Fuel Autioignition Reactivity on the High-Load Limits of HCCI Engines,” SAE Int. J. Engines 1 1 39 58 2008
- Compton, G. Hancock “Low Temperature Combustion and Autoignition” 115 1997
- Sato, S. Jun, D. Kweon, S. Yamashita, D. Iida, N. “Basic Research on the Suitable Fuel for HCCI Engine from the Viewpoint of Chemical Reaction” SAE Technical Paper, No. 2005-01-0149 2005
- Konno, M. Chen, Z. “Ignition Mechanisms of HCCI Combustion Process Fueled with Methane/DME Composite Fuel” SAE Technical Paper, No. 2005-01-0182 2005
- Yamada, H. Sakanashi, H. Choi, N. Tezaki, A. “Simplified Oxidation Mechanism of DME applicable for Compression Ignition” SAE Technical Paper, No. 2003-01-1819 2003
- Dec, J. “A Computational Study of the Effects of Low Fuel Loading and EGR on Heat Release Rates and Combustion Limits in HCCI Engines” SAE Technical Paper, No. 2002-01-1309 2002
- Sjoberg, M. Dec, J. “An investigation into lowest acceptable combustion temperatures for hydrocarbon fuels in HCCI engines” proceedings of the Combustion Institute 30 2719 2726 2005
- Sjöberg, M. Dec, J.E. “Influence of Fuel Autoignition Reactivity on the High-Load Limits of HCCI Engines,” SAE Int. J. Engines 1 1 39 58 2008
- Dec, J.E. Davisson, M.L. Sjöberg, M. Leif, R.N. et al. “Detailed HCCI Exhaust Speciation and the Sources of Hydrocarbon and Oxygenated Hydrocarbon Emissions,” SAE Int. J. Fuels Lubr. 1 1 50 67 2008
- Bression, G. Soleri, D. Savy, S. Dehoux, S. et al. “A Study of Methods to Lower HC and CO Emissions in Diesel HCCI,” SAE Int. J. Fuels Lubr. 1 1 37 49 2008