Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A New Model to Describe the Heat Transfer in HCCI Gasoline Engines

Journal Article
2009-01-0129
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-0129
Published April 20, 2009 by SAE International in United States
A New Model to Describe the Heat Transfer in HCCI Gasoline Engines
Sector:
Citation: Hensel, S., Sarikoc, F., Schumann, F., Kubach, H. et al., "A New Model to Describe the Heat Transfer in HCCI Gasoline Engines," SAE Int. J. Engines 2(1):33-47, 2009, https://doi.org/10.4271/2009-01-0129.
Language: English

References

  1. Lavy J. Dabadie J.-C. Angelberger C. Duret P. Juretzka A. Schäflein J. Ma T.-H. Lendres-se Y. Satre A. Schulz C. Krämer H. Zhao H. Damiano L. “Innovative Ultralow NOx Controlled Auto-Ignition Combustion Process for Gasoline Engines: the 4-Space Project” SAE 2000-01-1837
  2. Najit, P. M. Foster D. E. “Compression-Ignited Homogeneous Charge Combustion” SAE 830264
  3. Thring R.H. “Homogeneous Charge Compression Ignition (HCCI) Engines” SAE 892068
  4. Christensen M. Johansson B. Hultqvist A. “The Effect of Combustion Chamber Geometry on HCCI Operation” SAE 2002-01-0425
  5. Kaufmann, M. „Thermodynamische Analyse des kompressionsgezündeten Benzinmotors“ Dissertation, Technische Universität Graz 2005
  6. Sauter W. Hensel S. Spicher U. Schubert A. Schießl R. Maas U. „Experimentelle und numerische Untersuchung der Selbstzündungsmechanismen für einen HCCI-Benzinbetrieb“ 16. Aachener Kolloquium Fahrzeug- und Motorentechnik, 08.-10. Okt. 2007, Aachen
  7. Annand W.J.D. Ma T.H. „Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine” Proc Instn Mech Engrs 185 976 987 1970-1971
  8. Woschni G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE 670931
  9. Huber K. Woschni G. Zeilinger K. „Investigations on the Heat Transfer in Internal Combustion Engines under Low Load and Motoring Conditions“ SAE 905018
  10. Huber K. “Der Wärmeübergang schnelllaufender, direkteinspritzender Dieselmotoren” Dissertation, TU München 1995
  11. Sitkei G. Ramanaiah .G.V. “Rational Approach for Calculation of Heat Transfer in Diesel Engines” SAE 720027
  12. Hohenberg G.F. “Advanced Approaches for Heat Transfer Correlations” SAE 790825
  13. Hohenberg G.F. “Experimentelle Erfassung der Wandwärme von Kolbenmotoren” Habilitations-schrift, Graz 1980
  14. Han S.B. Chung Y.J. Kwon, Y.J. Lee S. “Empirical Formula for Instantaneous Heat Transfer Coefficient in Spark-Ignition Engines” SAE 972995
  15. Wimmer A. Pivec R. Sams T. “Heat Transfer to the Combustion Chamber and Prot Walls of IC Engines – Measurement and Prediction” SAE 2000-01-0568
  16. Bargende M. “Ein Gleichungsansatz zur Berechnung der instationären Wandwärmeverluste im Hochdruckteil von Ottomotoren” Dissertation, TH Darmstadt 1990
  17. Chang J. Güralp O. Filipi Z. Assanis D. Kuo T.W. Najt P. Rask R. “New Heat Transfer Correlation for an HCCI Engine Derived from Measurements of Instantaneous Surface Heat Flux” SAE 2004-01-2996
  18. Pojel A. Wichmann V. “Instationäre thermische und mechanische Motorbelastung von EURO III – abgasoptimierten Nutzfahrzeugdieselmotoren” FVV-Vorhaben Nr. 750 2002
  19. Schneemann A. Emmrich Th. Bach E. „Oberflächentemperaturmessung und lokaler Wärmeübergang“ FFV Informationstagung Motoren, Herbsttagung 2006
  20. Eiglmeier Ch. „Phänomenologische Modellbildung des gasseitigen Wandwärmeüberganges in Dieselmotoren“ Dissertation, Universität Hannover 2000
  21. Eiglmeier C. Lettmann H. Stiesch G. Merker G.P. „A Detailed Phenomenological Model for Wall Heat Transfer Prediction in Diesel Engines” SAE 2001-01-3265
  22. Hopwood A.B. Chynoweth S. Kalghatgi G.T. “A Technique to Measure Thermal Diffusivity and Thickness of Combustion Chamber Deposits In-Situ” SAE 982590
  23. Güralp O. Hoffmann M. Assanis D. Filipi Z. Kuo T.-W. Najt P. Rask R. „Characterizing the Effect of Combustion Chamber Deposits on a Gasoline HCCI Engine“ SAE 2006-01-3277
  24. Lu X. Tervola P. “Transient Heat Conduction in the Composite Slab-Analytical Method” Journal of Physics A: Mathematical and General 38 81 96 2005
  25. Kalghatgi G.T. “Deposits in Gasoline Engines – A Literature Review” SAE 902105
  26. Kalghatgi G.T. “Combustion Chamber Deposits in Spark Ignition Engines – A Literature Review” SAE 952443
  27. Hensel S. Sauter W. Sarikoc F. Kubach U. Spicher U. Schubert A. Schießl R. Maas U. „Numerical Analyses of the Effects of Mixture Quality on the Controlled Autoignition in Gasoline Engines“ 7th Comodia, Sapporo, Japan 2008
  28. Lee K. Lim J. Kim Y. Min K. „The Combustion Modelling in a CAI Engine by Using Coupled Multizone and Reduced Mechanism“ 7th Comodia, Sapporo, Japan 2008
  29. Standing R. Kalian N. Ma T. Zhao H. Wirth M. Schamel A. „Effects of Injection Timing and Valve Timings on CAI Operation in a Multi-Cylinder DI Gasoline Engine“ SAE 2005-01-0132
  30. Maiwald O. “Experimentelle Untersuchungen und mathematische Modellierung von Verbrennungsprozessen in Motoren mit homogener Selbstzündung” Dissertation, Universität Karlsruhe (TH) 2005
  31. Pischinger R. Klell M. Sams T. „Thermodynamik der Verbrennungskraftmaschine“, Springer Verlag, ISBN 1617-8920
  32. Pflaum W. Mollenhauer K. „Wärmeübergang in der Verbrennungskraftmaschine“

Cited By

Recommended Content

Journal Article Investigations on the Heat Transfer in HCCI Gasoline Engines
Technical Paper The Effect of Knock on Heat Loss in Homogeneous Charge Compression Ignition Engines
Journal Article The Influence of In-Cylinder Flows on Emissions and Heat Transfer from Methane-Diesel Dual Fuel Combustion