This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of an Experimentally Derived Tire and Road Surface Model for Vehicle Interior Noise Prediction
Technical Paper
2009-01-0068
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
As vehicle development timelines continue to shorten and more emphasis is put on simulating vehicle dynamic phenomena; the importance of having physically correct inputs increases. For modeling the road noise phenomena, there are some methods used in the industry such as application of experimental spindle forces or vertical displacements applied to the tire patch. Each of these has limitations with respect to absolute accuracy or dependency of the input on suspension characteristics. For accurate evaluation of new designs, an invariant input which can reproduce measured vehicle cabin response is beneficial. Specifically, it is desired that significant improvement can be made over the spindle force method. To this end, a tire model derived from experimental data has been developed, along with three degree of freedom tire patch input displacements. When coupled with a vehicle model, road noise can be predicted accurately up to a frequency of 300Hz, enabling virtual testing of the suspension and body design changes.
Recommended Content
Authors
Citation
Gagliano, C., Tondra, M., Fouts, B., and Geluk, T., "Development of an Experimentally Derived Tire and Road Surface Model for Vehicle Interior Noise Prediction," SAE Technical Paper 2009-01-0068, 2009, https://doi.org/10.4271/2009-01-0068.Also In
Tire and Wheel Technology and Vehicle Dynamics and Simulation, 2009
Number: SP-2221; Published: 2009-04-20
Number: SP-2221; Published: 2009-04-20
References
- Gagliano, Ch. Martin, A. Cox, J. Clavin K. Gerhard, F. Michelis, K. 2005 “A Hybrid Full Vehicle Model for Structure Borne Road Noise Prediction” Proceedings of the 2005 SAE Noise and Vibration Conferenec, paper 2005-01-2467
- Mas, P. Maejima, A. Miura, Y. Yokoi, T. “Frontloading Road Noise Simulations in Early Concept Development” Proceedings of the 2008 International Striyan Noise, Vibration & Harshness Congress, paper 08SNVH-0034
- Lee Ji-Un Suh Jin-Kwan Jeong Seung-Kab Kandarpa Satish Ahsan Aqil Wolf Walter L “Development of Input Loads for Road Noise Analysis” Procedings of the 2003 SAE Noise and Vibration Conference, paper 2003-01-1608
- Fahy, F.J. Some applications of the reciprocity principle in experimental vibroacoustics Acoustical Physics 49 2 2003 217 29
- Cuppens K. Sas P. Hermans L. “Evaluation of the FRF Based Substructuring and Modal Synthesis Technique applied to Vehicle FE Data” Proceedings of ISMA25 Leuven September 2000 1143 1150
- Kindt P. De Coninck F. Sas P. Desmet W. “Analysis of Tire/Road Noise Caused by Road Impact Excitations” 2007 SAE Noise and Vibration Conference, paper 2007-01-2248