This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Microstructural investigation of Ti-48Al-2Cr-2Nb (at.%) obtained by powder metallurgy using hot uniaxial pressing
Technical Paper
2008-36-0264
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The aim of this paper is to analyze the microstructural development in samples of Ti-48Al-2Cr-2Nb (at.%) alloys obtained by powder metallurgy (P/M). This alloy has potential applications when high operating temperatures are required, e. g. turbines, aerospace applications, automotive engines valves and turbocharger rotors. The elementary powders were mixed for 1 hour, cold uniaxially pressed at 60 MPa and sintered at 1100°C, for 1 hour, under vacuum. Then, the specimens were milled and submitted to a second stage that included cold isostatic pressing (400 MPa) with subsequent hot uniaxial pressing (20 MPa), between 900 up to 1200°C, for 2 hours, in argon atmosphere. The alloys were characterized by XRD (X-ray diffraction), SEM (Scanning Electron Microscopy), EDS (Energy Dispersive Spectroscopy) and Vickers microhardness measurements. The results indicated the viability of the route and the tendency of a lamellar microstructure in high sintering temperatures.
Authors
- Felipe Fernando Ruiz Gonçalves - Instituto Tecnológico de Aeronáutica - ITA
- Carlos de Moura Neto - Instituto Tecnológico de Aeronáutica - ITA
- Eduardo Tavares Galvani - Escola de Engenharia de Lorena - EEL/USP
- Vinicius André Rodrigues Henriques - Instituto de Aeronáutica e Espaço, Divisão de Materiais - IAE/AMR-CTA
Citation
Gonçalves, F., de Moura Neto, C., Galvani, E., and Henriques, V., "Microstructural investigation of Ti-48Al-2Cr-2Nb (at.%) obtained by powder metallurgy using hot uniaxial pressing," SAE Technical Paper 2008-36-0264, 2008, https://doi.org/10.4271/2008-36-0264.Also In
References
- KIM, S. SMITH, G.D.W. ROBETS, S.G. CEREZO, A. Alloying elements characterization in γ-based titanium aluminides Materials Science & Engineering A 250 77 82 1998
- ARENAS, M. F. ACOFF, V. L. The effect of postweld heat treatment on gas tungsten arc welded gamma titanium aluminide Scripta Materialia 46 241 246 2002
- ZHAO, L. BEDDOES, J. WALLACE, W. Evaluations of P/M Gamma Titanium Aluminides Advanced Performance Materials 4 42 434 1997
- GNANAMOORTHY, R. MUTIH, Y. MIZUHARA, Y. Effects of chromium addition on the sustained-load cracking characteristics of gamma-base titanium aluminides Materials Science and Engineering A 194 35 41 1995
- LI, X.Y. TANIGUCHI, S. Correlation of high temperature oxidation with tensile properties for Ti-48Al-2Cr-2Nb and Ti-48Al-2Cr-2Fe alloys Intermetallics 13 683 693 2005
- CHRAPONSKI, J. The effect of lamellar separation on the properties of a Ti-46Al-2Nb-2Cr intermetallics alloy Materials Characterization XX 2006
- PENG, L. M. WANG, J. H. LI, H. ZHAO, J. H. HE, L. H. Synthesis and microstructural characterization of Ti-Al3Ti metal-intermetallic laminate (MIL) composites Scripta Materialia 52 243 248 2005
- VISWANATHAN, G. B. KARTIKEYAN, S. MILLS, M. J. VASUDEVAN, V. K. Creep properties of a fully-lamellar Ti-48Al-2Cr-2Nb alloy Materials Science and Engineering A 319-321 833 837 2001
- CHRAPONSKI, J. SZKLINIARZ, W. KOSCIELNA, A. SEREKA, B. Microstructure and chemical composition of phases in Ti-48Al-2Cr-2Nb intermetallics alloy Materials Chemistry and Physics 81 438 442 2003
- ASM Titanium alloys - Materials Properties Handbook 2 American Society of Metals. Material Park: Ohio 1998
- GONÇALVES, F.F.R. MOURA NETO, C. CAIRO, C.A.A. GALVANI, E.T. HERIQUES, V.A.R. Microstrucural investigation of Ti-48Al-2Cr-2Nb alloy obtained by powder metallurgy Sixth International Latin American Conference on Powder Technology - PTECH 2007 Búzios, RJ, Brazil 2007
- MAZIASZ, P. J. RAMANUJAN, R. V. LIU, C.T. WRIGHT, J. L. Effects of B and W alloying additions on the formation and stability of lamellar structures in two-phase gamma-TiAl Intermetallics 5 83 95 1997