This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Use of Retardation Models in Crack Propagation Simulation
Technical Paper
2008-36-0007
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The objective of this paper is to provide a review of retardation models for constant and variable amplitude spectrum loading in 2D constrained small scale yielding. The models considered use a numerical 2D finite element method to determine crack opening and closing stress intensity factors. The correlation of the predictions of the models with experimental data is examined. Procedures used to edit variable amplitude spectrum loading are also presented and the effects of this editing on fatigue life predictions for structural components are discussed.
Authors
Citation
Ricardo, L., Andrade, A., and Topper, T., "The Use of Retardation Models in Crack Propagation Simulation," SAE Technical Paper 2008-36-0007, 2008, https://doi.org/10.4271/2008-36-0007.Also In
References
- Miner, M. A. “ Cumulative Damage in Fatigue ” Journal of Applied Mechanics ASME 12 USA 1945 A159 A164
- Schijve, J. “ Fatigue Crack Propagation in Light Alloy Sheet Material and Structures ” NLR Report MP195 Amsterdam 1960
- Stouffer, D. C. Williams, J. F “A Method for Fatigue Crack Growth with a Variable Stress Intensity Factor” Eng. Fracture Mech 11 525 536 1979
- Paris, P.C. Erdogan, F. “Journal of Basic Engineering” 85 528 1963
- Ditlevsen, O. Sobczyk, K. “ Random Fatigue Crack Growth with Retardation ” Eng. Fracture Mech. 24 6 861 878 1986
- Dugdale, D.S. “Yielding of Steel Sheets Containing Slits” Journal Mech. Phys. Solids 100 104 8 USA 1960
- Skorupa, M Skorupa, A. “Experimental Results and Predictions on Fatigue Crack Growth in Structural Steel” Int. Journal of Fatigue 27 1016 1028 2005
- Murthy, A. R.C. Palani, G. S. Iyer, N. R. “State of Art Review on Fatigue Crack Growth Analysis under Variable Amplitude Loading” IEI Journal 118 129 2004
- Newman, J.C. Jr. “The Merging of Fatigue and Fracture Mechanics Concepts: A Historical Perspective” Progress in Aerospace Sciences 34 347 390 1998
- Wheeler, O E. “Spectrum Loading and Crack Growth” Transactions of the ASME Series D', Journal of Basic Engineering 94 181 186 1972
- Willenborg, J.D. Engle, R.M. Wood, H.A “A Crack Growth Retardation Model using na Effective Stress Concept” AFFDL, TM-71-FBR Air Force Flight Dynamics Laboratory, Wright Patterson Air force Base OH 1971
- Chang JB Hudson CM “Methods and models for predicting fatigue crack growth under random loading” ASTM STP 748 1981
- Gallagher, J.P. Hughes, T. F. “Influence of the Yield Strength on Overload Fatigue Crack Growth Behavior of 4340 Steel” AFFDL - TR-74-27 Air Force Flight Dynamics Laboratory, Wright Patterson Air force Base OH 1974
- Chang, J.B Szamossi, M. Liu, K. W. “Random Spectrum Fatigue Crack Growth Life Predictions With or Without Considering Loads Interactions” ASTM STP-748 3 40 1981
- Johnson, W. S. “Multi-Parameter Yield Zone Model For Predicting Spectrum Crack Growth” ASTM STP 748 85 102 1981
- Bell PD Wolfman A Mathematical modelling of crack growth interaction effects ASTM STP 595 1976 157 71
- Schijve J. Prediction methods for fatigue crack growth in aircraft material ASTM STP 700 1980 3 34
- de Koning AU A simple crack closure model for prediction of fatigue crack growth rates under variableamplitude loading ASTM STP 743 1981 63 85
- Baudin G Robert M Crack growth life-time prediction under aeronautical type loading Proceedings of the 5 th European Conference on Fracture Lisbon, Spain 1984 779 92
- Aliaga D Davy A Schaff, H. A simple crack closure model for predicting fatigue crack growth under flight simulation loading Durability and damage tolerance in aircraft design Warley, UK EMAS Ltd. 1985 605 30
- Newman, J.C. “A Finite Element Analysis Fatigue Crack Closure” NASA TM X 72005 NASA Hampton, VA 1975
- Corbly, D.M. Packman, P.F. “On The Influence of Single and Multiple Peak Overloads on Fatigue Crack Propagation in 7075-T6511 Aluminum” Eng. Fracture Mech. 5 479 497 1973
- Schijve, J. Brock, D. de Rigle, P. Report M2094 Amsterdam 1962
- Hardrarth, H.F. McEvily, A. T. Proc. Crack Propagation Simposium 1 Cranfield 1961
- Jonds, D. Wei, R.P. “An Exploratory Study of Dealy in Fatigue Crack Growth” Eng. Fracture Mech. 7 1971
- von Ewu, E. Hertzberg, R. Roberts, R. “Delay Defects in Fatigue Crack Propagation” Nat. Symposium F.M. 7 1971
- Hudosn, C.M. Raju, K.W. TN-D-5702 NASA
- Crooker, T.W “Effect of T.C. Cycling on Fatigue Grade Growth in High Strength Alloys” NRL Report 7220 1971
- Hubbard, R.P. “Trans. ASME, Journal Basic of Engineering 91 625 1969
- Hudson, C.M. Hardrath, H.F. TN-D-960 NASA 1961
- Mcmillan, J.C. Pelloux, R.M. ASTM STP 415 505 1966
- Christensen, R. H. “Fatigue Crack Growth Affected by Metal Fragments Wedged Between Opening Closing Crack Surface” Appl. Mater. Res. o 2 Ocotber 207 210 USA 1963
- Elber W. “Equivalent Constant Amplitude Concept for Fatigue Crack Growth under Spectrum Loading” ASTM STP 595 236 250 1976
- Swedlow, J. L. “Effectc and Plastic Flow in Cracked Plates” PhD Thesis California Institute of Technology Pasadena, USA 1965
- Ricardo, L.C. H Andrade, A.H.P. Goldefroid, L.B. Topper, T.H. 2004 “Finite Element Method to Simulate Crack Closure Stress Intensity Factor” SAE Paper Number 2004-01-2229, II International SAE Fatigue Conference June 22-23 Sao Paulo, Brazil
- Ansys Inc Ansys USA 2002
- ASTM “ Standard Test Method for Measurement of Fatigue Crack Growth Rates ” 1995
- Skorupa M. “ Load Interaction Effects During Fatigue Crack Growth Under Variable Amplitude Loading - A Literature Review” Fat. Fract. of Eng. Mat. & Structures 21 987 1006 1998
- Suresh, S. Fatigue of Materials 2nd Cambridge University Press Cambridge, UK 1998
- Youb, Y. Song, J. H. “Fatigue Crack Closure and Growth Behaviour Under Random Loading” Eng. Fracture Mech. 49 1 105 120 1994
- Barsom, J.M. “Fatigue Crack Growth Under Variable Amplitude Loading in Various Bridges Steels” ASTM STP-595 217 235 1981
- Hudson C. M “A Root Mean Square Approach for Predicting Fatigue Crack Growth under Random Loading” ASTM STP 748 41 52 1981
- Johnson, W. S. “Multi-parameter Yield Zone Model for Predicting Spectrum Crack Growth” ASTM STP 748 85 102 1981
- Rudd, J.L. Engle R.M. Jr. “Crack Growth Behavior of Center Cracked Panels Under Spectrum Loading” ASTM STP 748 115 132 1981
- Chang, J.B Szamossi, M. Liu, K. W. “Random Spectrum Fatigue Crack Growth Life Predictions With or Without Considering Loads 46. Interactions ” ASTM STP-748 3 40 1981
- Kikukawa M Jono M Kondo Y. Mikami S. “Fatigue Crack Closure and Estimation Method of Crack Propagation Rate under Stationary Varying Loading Conditions Including Random Loading (1st report, Effects of mean load and study on wave counting method)” Trans. Jpn Sot. Mech. Engrs 48 1496 1504 1982
- Jono M. Song J Kikukawa M. “Fatigue Crack Growth and Crack Closure of Structural Materials under Random Loading” Proc. ICM 6 1735 1742 1984
- Jono M. Song J Kikukawa M. “Prediction of Fatigue Crack Growth and Closure under Non-Stationary Random Loading” Proc. ICOSSAR 4 465 474 1985
- Jono M. Song J Kikukawa M. “Fatigue Crack Growth and Crack Closure under Variable Loadings (Effect of load variations on characteristic form of crack growth rate curve in region-II)” J. Sot. Mater. Sri. Jpn 34 1193 1199 1985
- Zheng, X. “On Some Basic Problems of fatigue Research in Engineering” Int. Journal of Fatigue 23 751 766 2001
- Frost, N.E. Marsh, K.J. Pook, L. In: Metal Fatigue Oxford Clarendon Press 20 22 1974
- Cai, Q.K. “ Theory of Fatigue and Fracture of Metals Shenyang Press of Northeast Institute of Technology 1989
- Heuler, P. Seeger, T. “A Criterion For Omission of Variable Amplitude Loading Histories” Int. Journal of Fatigue 225 230 8 4 1986
- ECCS Recommendations for Fatigue Design of Steel Structures Institute of Metal Construction (IOCM) of Swiss Federal Institute of Tecnology Lausanne, Switzerland ECCS 1985
- Shi, Y.J. Yan, Y.M. Li, Z.R. Shi, Z.J. Hou, W.W. “Assessment of Remaining Life of Steel Beams of Chang- Tai-Guam Bridge on The Line from Beijing to Guangzhou” Technical Report Beijing Institute of Railway Engineering, Chinese Academy of Railway Science 1990
- Zhao, S.B. Wang, Z.B. Fatigue Design Beijing Machinery Industry Press 1982
- Barsom J. M. “Fatigue Crack Growth under Variable Amplitude Loading in Various Bridge Steels” ASTM STP 595 217 235 1976