This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Vibration of a Sliding Vane Impacting on the Stator in a Rotary Compressor
Technical Paper
2008-01-2720
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This study analyzes vibration of a sliding vane impacting on a stator in a rotary compressor. The impact of the vane on the stator is analyzed by simulating a shell impact. Two-dimension plane strain approach is used to derive governing equations and the finite element method is used to determine natural frequencies and vibratory modes of a vane. The calculated results are compared and show good agreement with those obtained by using ABAQUS software. The vibratory amplitude of the vane in the first mode is larger than other modes. Therefore, the first vibratory mode shape with the natural frequency of 976 Hz and the maximum vibratory amplitude of 0.012 mm is the most important mode for consideration.
Recommended Content
Citation
Huang, Y. and Yu, Z., "Vibration of a Sliding Vane Impacting on the Stator in a Rotary Compressor," SAE Technical Paper 2008-01-2720, 2008, https://doi.org/10.4271/2008-01-2720.Also In
References
- Christoforou, A. P. Swanson, S. R. 1990 “Analysis of Simply-Supported Orthotropic Cylindrical Shells Subject to Lateral Impact Loads,” ASME J. Appl. Mech. 57 376 382
- Gong, S. W. Toh, S. L. Shim, V. P. W. 1994 “The Elastic Response of Orthotropic Laminated Cylindrical Shells to Low Velocity Impact,” Composites Engineering 4 2 247 266
- Lee, Y. S. Lee, K. D. 1997 “On the Dynamic Response of Laminated Circular Cylindrical Shells Under Impulse Loads,” Computers & Structures 63 1 149 157
- Matemilola, S. A. Stronge, W. J. 1997 “Impact Response of Composite Cylinders,” Int. J. Solids Structures 34 21 2669 2684
- Huang, Yuan Mao Liaw, Yung-Shane 2001 “The Impact of Sliding Blades in a Rotary Compressor,” ASME Journal of Mechanical Design December 123 583 589
- Ning, Jianguo Song, Weidong Liu, Haiyan 2002 “Failure Analysis of Plastic Thin Spherical Shells under Local Impact,” Key Engineering Materials 233-236 1 229 234
- Gong, S. W. Lam, K. Y. 2003 “Rotating Multilayered Cylindrical Shells to Impact Loading,” AIAA Journal 41 1 January 139 142
- Swaddiwudhipong, S. Koh, C. G. Liu, Z. S. 2003 “Contact-Impact Dynamic Response of Vessel Plates and Shells,” International Society of Offshore and Polar Engineers Proceedings of the Thirteenth International Offshore and Polar Engineering Conference 2763 2769
- Minnetyan, L. Abdi, F. 2004 “Dynamic Impact Loading Damage Propagation in Composite Structures,” AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 3 1951 1958
- Zheng, J. Y. Chen, Y. J. Deng, G. D. Sun, G. Y. Hu, Y. L. Li, Q. M. 2006 “Dynamic Elastic Response of an Infinite Discrete Multi-layered Cylindrical Shell Subjected to Uniformly Distributed Pressure Pulse,” International Journal of Impact Engineering 32 11 November 1800 1827
- Ning, Jian-Guo Song, Wei-Dong 2006 “Perforation of Plastic Spherical Shells under Impact by Cylindrical Projectiles,” Applied Mathematics and Mechanics 27 2 February 235 240
- Yin, X. C. Qin, Y. Zou, H. 2007 “Transient Responses of Repeated Impact of a Beam against a Stop,” International Journal of Solids and Structures 44 22-23 November 7323 7339
- Popprath, S. Ecker, H. 2007 “Nonlinear Dynamics of a Rotor Contacting an Elastically Suspended Stator,” Journal of Sound and Vibration 308 3-5 Dec 767 784
- Rao, S. S. 1990 Mechanical Vibrations Second Addison-Wesley Publishing Company
- Bachrach, W. E. Hansen, R. S. 1989 “Mixed Finite-Element Method for Composite Cylinder Subjected to Impact,” AIAA Journal 27 632 638
- Reddy, J. N. 1993 “An Introduction to the Finite Element Method” Second McGraw-Hill, Inc.
- Edward, L. 1976 “Numerical Methods in Finite Element Analysis” Second Prentice-Hall, Inc.
- Aggour, H Sun, C. T. 1988 “Finite Element Analysis of a Laminated Composite Plate Subjected to Circularly Distributed Central Impact Loading,” Computers & Structures 28 6 729 736