This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aerodynamic Simulations of a Generic Tractor-Trailer: Validation and Analysis of Unsteady Aerodynamics
Technical Paper
2008-01-2612
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Aerodynamic simulations of a 1:8-scale simplified tractor-trailer, designated as the Generic Conventional Model (GCM), were conducted using a Lattice-Boltzmann based solver. Comparisons were made to experimental measurements from the NASA Ames 12-Foot Pressure Wind Tunnel, including drag coefficients as a function of yaw, static and transient surface pressures, and three-component particle image velocimetry. The baseline model configuration was tested at yaw angles from 0 to 12 degrees, allowing the calculation of the wind-averaged drag coefficient. Results demonstrated that the simulation predicted body-axis drag within experimental uncertainty and also resolved the correct pressure distribution and flow structure in the separated flow regions including the tractor-trailer gap and trailer wake regions. The comparison of the experimental transient pressure spectra showed good agreement with the simulation results, both in magnitude and identification of dominant spectral peaks. The simulation data was further analyzed in order to gain insight into the source of drag increases at specific yaw angles and explain the unique character of the GCM drag curve. The analysis of the drag contributions and transient flow structures are directly applicable for developing and refining intelligent tractor-trailer drag reduction concepts when the same modeling approach is applied to full scale detailed tractor-trailer geometries.
Recommended Content
Authors
Topic
Citation
Horrigan, K., Duncan, B., Keating, A., Gupta, A. et al., "Aerodynamic Simulations of a Generic Tractor-Trailer: Validation and Analysis of Unsteady Aerodynamics," SAE Technical Paper 2008-01-2612, 2008, https://doi.org/10.4271/2008-01-2612.Also In
Aerodynamics and Fuel Economy ~ Aerodynamic Devices and Methods & Technologies
Number: SP-2219; Published: 2008-10-07
Number: SP-2219; Published: 2008-10-07
References
- Storms, B.L. Satran, D.R. Heineck, J.T. Walker, S.M. “A Summary of the Experimental Results for a Generic Tractor-Trailer in the Ames Research Center 7-by-10-Foot and 12-Foot Wind Tunnels” Ames Research Center Moffett Field, CA 2006
- Sims-Williams, D.B. Dominy, R.G. Howell, J.P. An Investigation into Large Scale Unsteady Structures in the Wake of Real and Idealized Hatchback Car Models SAE Paper 2001-01-1041
- Sims-Williams, D.B. Duncan, B.D. The Ahmed Model Unsteady Wake: Experimental and Computational Analyses” SAE Paper 2003-01-1315
- Duncan, B.D. Golsch, K. “Characterization of Separated Turbulent Flow Regions in CFD Results for a Pontiac NASCAR Race Car” SAE Paper 2004-01-3556 2004
- Albukrek, C. Doddegowda, P. Ivaldi, A. Amodeo, J. “Unsteady Flow Analysis of a Formula Type Open Wheel Race Car in Cornering” SAE Paper 2006-01-3661
- Senthooran, S. Crouse, B. Freed, D. Balasubramamian, G. Caridi, D. “Numerical Simulation of Windnoise on the Side-glass of a Production Automobile” FISITA 2006
- Senthooran, S. Crouse, B. Freed, D. Balasubramamian, G. Noelting, S. Duncan, B. Powell, R. “Prediction of Wall Pressure Fluctuations on an Automobile Side-glass using a Lattice-Boltzmann Method”
- Furukawa, N. Shiozawa, H. Koyama, R. Ishihara, Y. Aoki, H. “Application of CFD Aerodynamic Computation Methods to New Vehicle Development Based on a Model that Reproduces a 230 Engine Bay and Floor” JSAE Paper #20045513 2004
- Duncan, B.D. Senthooran, S. Hendriana, D. Sivakumar, P. Freed, D. Gleason, M.E. Hall, D.C. “Multi-Disciplinary Aerodynamics Analysis for Vehicles: Application of External Flow Simulations to Aerodynamics, Aeroacoustics and Thermal Management of a Pickup Truck” SAE Paper 2007-01-0100
- Horrigan, K. Duncan, B. Sivakumar, P. Gupta, A. “Aerodynamic Simulations of a Class 8 Heavy Truck: Comparison to Wind Tunnel Results and Investigation of Blockage Influences”, 2007-01-4295 SAE International
- Schoon, R. Pan, F.R “Practical Devices for Heavy Truck Aerodynamic Drag Reduction”, 2006-01-3531 SAE International
- Leuschen, J Cooper, K.R. “Full Scale Wind Tunnel Tests of Production and Prototype, Second-Generation Aerodynamic Drag-Reducing Devices for Tractor-Trailers”, 2006-01-3456 SAE International Chicago, IL 2006
- Storms, B.L. Ross, J.C. “Aerodynamic Drag Reduction of the Underbody of a Class-8 Tractor-Trailer SAE International Chicago, IL 2006
- Grover, K. Visser, K.D. “Over-the-Road Tests of Sealed Aft Cavities on Tractor Trailers” SAE International Chicago, IL 2006
- Cary W.K., III Landman, D. “Experimental Investigation of Wake Boards for Drag Reduction on an Ahmed Body” SAE International Chicago, IL 2006
- Ortega, J.M. Salari, K. “An Experimental Study of Drag-Reduction Devices for a Trailer Underbody and Base” 34 th AIAA Fluid Dynamics Conference and Exhibit Portland, OR 2004
- Ortega, J.M. Dunn, T. McCallen, R. Salari, K. “Computer Simulation of a Heavy Vehicle Trailer Wake” Aerodynamics of Heavy Vehicles: Trucks, Buses, and Trains Conference Monterey, CA 2002
- Storms, B.L. Ross, J.C. Heineck, J.T. Walker, S.M. Driver, D.M. Zilliac, G.G. “An Experimental Study of the Ground Transportation System (GTS) Model in the NASA Ames 7-by-10-Ft Wind Tunnel,” Ames Research Center Moffett Field, CA 2001
- Storms, B.L. Satran, D.R. Heineck, J.T. Walker, S.M. “A Study of Reynolds Number Effects and Drag-Reduction Concepts on a Generic Tractor-Trailer” 2004
- Storms, B.L. Satran, D.R. Heineck, J.T. Walker, S.M. “Detailed Experimental Results of Drag-Reduction Concepts on a Generic Tractor-Trailer” SAE 2005-01-3525
- Pointer, W.D. “Evaluation of Commercial CFD Code Capabilities for Prediction of Heavy Vehicle Drag Coefficients” 2004
- Li, Y. Shock, R. Zhang, R. Chen, H. “Numerical Study of Flow Past an Impulsively Started Cylinder by Lattice Boltzmann Method” J. Fluid Mech. 519 2004 273 300
- Chen, H. Teixeira, C. Molvig, K. “Realization of Fluid Boundary Conditions via Discrete Boltzmann Dynamics” Intl. J. Mod. Phys. C 9 8 1998 1281
- Yakhot, V Chen H Staroselsky I Qian Y Shock R Kandasamy S Zhang R Mallick S Alexander C 2001 “A New Approach to Modelling Strongly Non-Equilibrium, Time-Dependent Turbulent Flows” Exa Internal Report 2001
- Shock, R. Mallick, S. Chen, H. Yakhot, V. Zhang, R. “Recent Simulation Results On 2D NACA Airfoils Using A Lattice Boltzmann Based Algorithm,” AIAA J. of Aircraft 39 3 2002 434 439
- Shock, R. Qian, Y. Chen, H. Zhang, R. “PowerFLOW Simulations for 2D Cavity and Backward Step Flows” 2002
- Li, Y. Shock, R. Zhang, R. Chen, H. “Simulation of Turbulent Flow in a Cyclonic Separator with Lattice-Boltzmann Method” AIAA J. 2006
- Chen, S. Doolen, G. “Lattice Boltzmann Method for Fluid Flows” Ann. Rev. Fluid Mech. 30 329 364 1998
- Chen, H. Filippova, O. Hoch, J. Molvig, K. Shock, R. Teixera, C. Zhang, R. “Grid Refinement in Lattice Boltzmann Methods Based on Volumetric Formulation” Physica A 362 157 167 2006
- Lietz, R. Kandasamy, S. Chen, H. “Exterior Airflow Simulations Using a Lattice Boltzmann Approach” SAE Paper 2002-01-0596
- “SAE Wind Tunnel Test Procedure for Trucks and Buses,” SAE J1252 JUL81, SAE Recommended Practice July 1981