This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Homogeneous Charge Compression Ignition at High Engine Speeds using a Super Rapid Compression Machine
Technical Paper
2008-01-2403
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
We had improved RCM and developed a Super Rapid Compression Machine (SRCM) that realizes an extremely rapid compression compared with the conventional RCM. In this study, the performance of the developed SRCM was evaluated. The SRCM was used to investigate on the effects of equivalence ratio on HCCI of n-heptane and iso-octane fuel/air mixture. Experimental results for ignition delay time, τ, and combustion time, t, were obtained from the cylinder pressure histories. The HCCI at high engine speeds was clarified by Optical observation using a high speed camera. As a result, the ignition delay time and combustion time are found to saturate above equivalence ratio of 0.6 at constant compression ratio. In the HCCI combustion in high compression ratio case, shock wave occurs from the core region of the roll-up vortex cause by piston motion. The HCCI combustion has many peaks over a wide range of frequency.
Recommended Content
Authors
Citation
Watanabe, Y., Morikawa, K., Kuwahara, T., and Tanabe, M., "Evaluation of Homogeneous Charge Compression Ignition at High Engine Speeds using a Super Rapid Compression Machine," SAE Technical Paper 2008-01-2403, 2008, https://doi.org/10.4271/2008-01-2403.Also In
References
- Yamashita, D. et al. The Study on Auto-ignition and Combustion Process of the Fuel Blended with Methane and DME in HCCI Engine Proceedings of the JSAE 25-05 1 6 2005
- Vittorio, Manente Et al. Mini High Speed HCCI Engine Fueled with Ether: Load Range, Emission Characteristics and Optical Analysis SAE 2007-01-3606 2007
- Tanaka, K. et al. A Basic Study of HCCI Combustion Using a Rapid Compression Machine Proceedings of the 16 th Symposium on Internal Combustion 91 96 2000
- Katano, T. et al. A Study of Ignition Delay Using a Rapid Compression Machine Proceedings of the 33 rd Symposium (Japanese) on Combustion 635 637 1995
- He, X. et al. An Experimental and Modeling Study of iso-octane Ignition Delay Times under Homogeneous Charge Compression Ignition Conditions Combustion and Flame 142 266 275 2005
- Chien, X. et al. A Study of the Auto-ignition Phenomenon in the Case that Fuel is supplied as Stratified Condition Proceedings of the 42 nd Symposium (Japanese) on Combustion 279 280 2004
- Yamazaki, M. et al. A Study on Maximization of Dynamic Crushing Energy Absorption of Cylindrical Shell Structures Proceedings of JSME, A 64 620 1077 1083 1998
- Tanaka, S. et al. Two-stage ignition in HCCI combustion and HCCI control by fuels and additives Combustion and Flame 133 467 481 2003
- Iijima, A. et al. A Study of HCCI Combustion Using a Two-stroke Gasoline Engine with a High Compression Ratio SAE 2006-32-0043 2006
- Tanabe, M. et al. Spontaneous Ignition of Liquid Droplets from a view of Non-Homogeneous Mixture Formation and Transient Chemical Reactions Twenty-Sixth symposium (International) on Combustion/The Combustion Institute 1637 1643 1996
- Tanaka, S. et al. A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine Combustion and Flame 133 467 481 2003
- LEE DAEYUP Et al. Rapid Compression Machine: Heat Transfer and Suppression of Corner Vortex Combustion and Flame 114 531 545 1998