This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Deposit Formation in the Holes of Diesel Injector Nozzles: A Critical Review
Technical Paper
2008-01-2383
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Current developments in fuels and emissions regulations are resulting in increasingly severe operating environment for the injection system. Formation of deposits within the holes of the injector nozzle or on the outside of the injector tip may have an adverse effect on overall system performance. This paper provides a critical review of the current understanding of the main factors affecting deposit formation.
Two main types of engine test cycles, which attempt to simulate field conditions, are described in the literature. The first type involves cycling between high and low load. The second involves steady state operation at constant speed either at medium or high load.
A number of influences on the creation of deposits are identified. This includes fouling through thermal condensation and cracking reactions at nozzle temperatures of around 300°C. Also the design of the injector holes is an influence, because it can influence cavitation. The implosion of cavitation bubbles is believed to limit nozzle deposits. Field and laboratory tests showed that small amounts (around 1ppm) of zinc tend to increase the formation of deposits and are therefore another influence. But it is not clear whether zinc acts catalytically to accelerate deposit formation or if it becomes part of the solid deposits. Bio-diesel has been observed to lead to higher deposit formation in the injector nozzle.
The chemical and physical processes that lead to deposit formation are not known or well understood, due to their complexity. A physical mechanism put forward focuses on the role of the residual fuel that remains in the nozzle holes after the end of the injection process.
Recommended Content
Journal Article | Coking Phenomena in Nozzle Orifices of Dl-Diesel Engines |
Technical Paper | Filtration Technology Challenges for Common-Rail Diesel Engine Fuel Systems |
Journal Article | Injection Nozzle Coking Mechanism in Common-rail Diesel Engine |
Authors
- A. Birgel - University College London
- N. Ladommatos - University College London
- P. Aleiferis - University College London
- S. Zülch - Delphi Diesel Systems
- N. Milovanovic - Delphi Diesel Systems
- V. Lafon - Delphi Diesel Systems
- A. Orlovic - Delphi Diesel Systems
- P. Lacey - Delphi Diesel Systems
- Paul Richards - Innospec Limited
Citation
Birgel, A., Ladommatos, N., Aleiferis, P., Zülch, S. et al., "Deposit Formation in the Holes of Diesel Injector Nozzles: A Critical Review," SAE Technical Paper 2008-01-2383, 2008, https://doi.org/10.4271/2008-01-2383.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Sem T. R. “Investigation of Injector Tip Deposits on Transport Refrigeration Units Running on Biodiesel Fuel” SAE Technical Paper 2004-01-0091
- Winterbone D. E. Clough E. Rao K. K. Richards P. Williams D. “The Effect of DI Nozzle Fouling on Fuel Spray Characteristics” SAE Technical Paper 922232
- Richards P. Walker R.D. Williams D. “Fouling of Two Stage Injectors - An Investigation into Some Causes and Effects” SAE Technical Paper 971619
- Blanco J. C. “Effect of Diesel Fuel Quality and Additives on Engine Performance - An Update” SAE Technical Paper 911710
- Loest O. Ullmann J. Winter J. “Investigation on the Addition of FAME to Diesel Fuels” Research Report 639e Hamburg, Germany 2007
- Leedham A. Caprotti R Graupner O. Klaua T. “Impact of Fuel Additives on Diesel Injector Deposits” SAE Technical Paper 2004-01-2935
- Caprotti R. Breakspear A. Graupner O. Klaua T. “Detergency Requirements of Future Diesel Injection System” SAE Technical Paper 2005-01-3901
- Caprotti R. Breakspear A. Graupner O. Klaua T. Kohnen O. “Diesel Injector Deposits Potential on Future Fueling Systems” SAE Technical Paper 2006-01-3359
- Graupner O. Klaua T. Caprotti R. Breakspear A. Schik A. Rouff C. “Injector Deposit Test For Modern Diesel Engines” TAE Symposium 2005
- Gallant T. R. Carman M. C. Gray J. T. Strete N. M. “Cummins L10 Injector Depositing Test to Evaluate Diesel Fuel Quality” SAE Technical Paper 912331
- Gutman M. Tartakovsky L. Kirzhner Y Zvirin Y. “Development of a Screening Test for Evaluating Detergent/Dispersant Additives to Diesel Fuels” SAE Technical Paper 961184
- Panesar A. Martens A. Jansen L. Lal S. Ray D. Twilley M. “Development of a New Peugeot Xud9 10-Hour Cyclic Test to Evaluate the Nozzle Coking Propensity of Diesel Fuels” SAE Technical Paper 2000-01-1921
- Williams R. “Development of a Nozzle-Fouling Test for Additive Rating in Heavy-Duty Di Diesel Engines” SAE Technical Paper 2002-01-2721
- Blythe G. H. Flask C. A. “Development of an Image Analysis System to Rate Injectors from the Cummins L10 Injector Depositing Test” SAE Technical Paper 972902
- Hawthorne M. Roos J. W. Openshaw M. J. “Use of Fuel Additives to Maintain Modern Diesel Engine Performance with Severe Test Conditions” SAE Technical Paper 2008-01-1806
- Argueyrolles B. Dehoux S. Gastaldi P. Grosjean L. Levy F. Michel A. Passerel D. “Influence of injector nozzle design and cavitation on coking phenomenom” SAE 2007-01-1896 JSAE 20077184
- Mulard P. P. China P. N. “Development of a Diesel Fuel Screening Test for Injector Nozzle Coking” SAE Technical Paper 922184
- Mendoza M. C. Zhang Q. Hansen A. C. Reid J. F. “Injector Nozzle Coking With Oxygenated Diesel” SAE Technical Paper 2001-01-2016
- Korus R. A. Jo J. Peterson C. L “A Rapid Engine Test to Measure Injector Fouling in Diesel Engines Using Vegetable Oil Fuels” Journal of the American Oil Chemists' Society 62 11 1563 1564 1985
- Barbour R. Arters D. Dietz J. Macduff M. Panesar A. Quigley R. “Diesel Detergent Additive Responses in Modern, High-Speed, Direct-Injection, Light-Duty Engines” SAE Technical Paper 2007-01-2001
- Shiotani H. Goto S. “Studies of Fuel Properties and Oxidation Stability of Biodiesel Fuel” SAE Technical Paper 2007-01-0073
- BS ISO 4010 “Diesel engines - Calibrating nozzle, delay pintle type”
- Caprotti R. Breakspear A. Klaua T. Weiland P. Graupner O. Bittner M. “RME Behaviour in Current and Future Diesel Fuel FIE's” SAE Technical Paper 2007-01-3982
- Nwafor O. M. I. Rice G. “Performance of Rapeseed Oil Blends in a Diesel Engine” Applied Energy 54 4 345 354 1996 Elsevier Science
- Labeckas G. Slavinskas S. “Performance of direct-injection off-road diesel engine on rapeseed oil” Renewable Energy 31 2006 849 863 Elsevier
- Fraer R. Dinh H.n Proc K. McCormick R. L. Chandler K. Buchholz B. “Operating Experience and Teardown Analysis for Engines Operated on Biodiesel Blends (B20)” SAE Technical Paper 2005-01-3641
- Huzayyin A.S. Bawady A.H. Rady M.A. Dawood A. “Experimental evaluation of Diesel engine performance and emission using blends of jojoba oil and Diesel fuel” Energy Conversion and Management 45 2004 2093 2112 Elsevier
- Kalam M.A. Masjuki H.H. “Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil” Biomass and Bioenergy 27 2004 289 297 Elsevier
- Ribeiro N.M. Pinto A.C. Quintella C.M. da Rocha G.O. Teixeira L.S.G. Guarieiro L.L.N. do Carmo Rangel M. Veloso M.C.C. Rezende M.J.C. da Cruz R.S. de Oliveira A.M. Torres E.A. de Andrade J.B. “The Role of Additives for Diesel and Diesel Blended (Ethanol or Biodiesel) Fuels: A Review” Energy & Fuels 2007 21 2433 2445
- Danilov A.M. “Fuel additives: Evolution and Use in 1996-2000” Chemistry and Technology of Fuels and Oils 2001 37 6 444 455
- Quigley R. Barbour R. H. “Biodiesel Quality Improvement with Additive Treatment” SAE Technical Paper 2004-01-1859
- Gairing M. Marriott J. M. Reders K. H. Reglitzky A. A. Wolveridge P.E. “The Effect of Modern Additive Technology on Diesel Fuel Performance” SAE Technical Paper 950252
- Claar K. G. Blythe G. H. Pocinki S. B. “Diesel Fuel Properties and Additive Effects on DI Injector Deposit Formation SAE Technical Paper 932738
- Reading K. “A Study of the Clean-Up Activity of a High-Performance Diesel Fuel Detergent in IDI Engines” SAE Technical Paper 961942
- Pistillo W.R. Gundic D.T. Kirchner-Jean T.M. “Counteracting Detrimental EGR Effects with Diesel Fuel Additive” SAE Technical Paper 2003-01-1915
- Tomlinson A. Scherer B. Karakosta E. Oakey M. Danks T.N. Heyes D.M. Taylor S.E. “Adsorption properties of succinimide detergents on carbonaceous substrates” Carbon 2000 38 13 28
- Zerda T.W. Yuana X. Mooreb S.M. “Effects of fuel additives on the microstructure of combustion engine deposits” Carbon 2001 39 1589 1597
- Songa Y. Rena T. Fub X. Xu X. “Study on the relationship between the structure and activities of alkyl methacrylate - maleic anhydride polymers as cold flow improvers in diesel fuels” Fuel Processing Technology 2005 86 641 650
- Anastopoulos G. Lois E. Zannikos F. Kalligeros S. Teas C. “Influence of aceto acetic esters and dicarboxylic acid esters on diesel fuel lubricity” Tribology International 2001 34 749 755
- Ullmann J. Geduldig M. Stutzenberger H. Caprotti R. Balfour G. “Investigation into the Formation and Prevention of Internal Diesel Injector Deposits” SAE Technical Paper 2008-01-0926
- Watkinson A. P. Wilson D. I. “Chemical Reaction Fouling: A Review” Experimental Thermal and Fluid Science 14 361 374 Elsevier Science Inc. New York 1997
- Lepperhoff G. Houben M. “Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers” SAE Technical Paper 931032
- Caprotti R. Fowler W. J. Lepperhoff G. Houben M. “Diesel Additive Technology Effects on Injector Hole Erosion/corrosion, Injector Fouling and Particulate Traps” SAE Technical Paper 932739
- Lüft M. Bernhardt S. Velji A. Spicher U. “Optimization of Injection of Pure Rape Seed Oil in Modern Diesel Engines With Direct-Injection” SAE Technical Paper 2007-01-2031
- Stephenson T. Davies C. W. Lloyd D. H. Wilson G. J. “Construction and Use of a Dual-Fuel, Split-Engine Commercial Vehicle for Demonstrating Fuel Effects on Performance” SAE Technical Paper 2007-24-0130
- Richards P. Reid J. Tok L.-H. MacMillan I. “The Emerging Market for Biodiesel and the Role of Fuel Additives” SAE Technical Paper 2007-01-2033
- Reading K. Evans T. M. “A Chassis Dynamometer Study of the Effects of Ago Detergent and Ignition Improver on Vehicle Fuel Consumption” SAE Technical Paper 942012