This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Using Hybridization between the Partial Element Equivalent Circuit Method and the Multi-Conductor Transmission Line Method to Improve EMC in Rear Batteries
Technical Paper
2008-01-1475
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The increasing complexity and amount of equipment under the hood has led car manufacturers to place the battery in the trunk. Consequently the connections between the battery and the engine will require large cable bundles when the potentially disturbing frequencies flowing on the cables range from DC to several hundred kilohertz. In this paper, we address the implementation of a simulation tool which enables us to assess the effect of those connections. This tool aims at rapidly obtaining a circuit equivalent for the bundle and is based on the PEEC method (Partial Element Equivalent Circuit) as well as on the MTL method (Multi-conductor Transmission Line). The PEEC method gives us inductances when the MTL method provides us with the values of the capacitors which the model uses. The electric model obtained in that way makes it possible to connect this virtual bundle to battery and alternator models in order to understand the resonance phenomena created by this interconnection.
Authors
- F. Duval - IRSEEM - ESIGELEC, France
- A. Louis - IRSEEM - ESIGELEC, France
- B. Mazari - IRSEEM - ESIGELEC, France
- L. Pichon - Université Paris-Sud, Université Pierre et France
- K. Henry - VALEO CONNECTIVE SYSTEMS, France
- A. Nazif - VALEO CONNECTIVE SYSTEMS, France
- F. De Daran - VALEO CONNECTIVE SYSTEMS, France
Topic
Citation
Duval, F., Louis, A., Mazari, B., Pichon, L. et al., "Using Hybridization between the Partial Element Equivalent Circuit Method and the Multi-Conductor Transmission Line Method to Improve EMC in Rear Batteries," SAE Technical Paper 2008-01-1475, 2008, https://doi.org/10.4271/2008-01-1475.Also In
References
- RUEHLI Albert E. «Equivalent Circuit Models for Three Dimensional Multi-conductor Systems» IEEE Transactions on Microwave Theory and Techniques, MTT 22 3 216 221 March 1974
- CLAVEL E. «Vers un Outil de Conception de Câblage: Le Logiciel InCa» Thesis of the Institut National Polytechnic of Grenoble 21 November 1996
- VIALARDI E. «Une technique de réduction d'ordre couplée à des modèles PEEC: application sur équipements aéronautiques» Dottorato in Ingegneria Elettronica e delle Comunicazioni - XV ciclo POLITECNICO DI TORINO February 2003 http://www.eln.polito.it/Ricerca/emc/publications/file/phd-2003-vialardi.pdf
- DUVAL F. «Gestion du câblage des masses électrique dans un véhiclue automobile: Apllication CEM» December 2007 Orsay
- SPICE EECS Department of the University of California Berkeley 4 april 2007 http://bwrc.eecs.berkeley.edu/Classes/IcBook/SPICE/ SpiceWin Version of Spice 3.5f Berkeley Microsoft OS Mües Wolfgang Vogt Holger http://www.uni-duisburg.de/FB9/EBS/hauptteil_hauptteil_software.html