This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimal Engine Calibration for Individual Driving Styles
Technical Paper
2008-01-1367
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Increasing functionality of electronic control units has enhanced our ability to control engine operation utilizing calibration static maps that provide the values of several controllable variables. State-of-the-art simulation-based calibration methods permit the development of these maps with respect to extensive steady-state and limited transient operation of particular driving cycles. However, each individual driving style is different and rarely meets those test conditions. An alternative approach was recently implemented that considers the derivation of these maps while the engine is running the vehicle. In this approach, a self-learning controller selects in real time the optimum values of the controllable variables for the sequences of engine operating point transitions, corresponding to the driver's driving style. This paper presents a quantitative assessment of the benefits in fuel economy and emissions, derived from employing a self-learning controller for optimal injection timing in a diesel engine. The engine is simulated over transient operation in response of a hypothetical driver's driving style.
Recommended Content
Authors
Citation
Malikopoulos, A., Assanis, D., and Papalambros, P., "Optimal Engine Calibration for Individual Driving Styles," SAE Technical Paper 2008-01-1367, 2008, https://doi.org/10.4271/2008-01-1367.Also In
References
- Roepke, K. Fischer, M. “Efficient Layout and Calibration of Variable Valve Trains,” SAE Transactions-Journal of Engines 110 2001 SAE 2001-01-0668
- Stuhler, H. Kruse, T. Stuber, A. Gschweitl, K. Piock, W. Pfluegl, H. Lick, P. “Automated Model-Based GDI Engine Calibration Adaptive Online DoE Approach,” SAE 2002 World Congress Detroit, Michigan March 3-7 2002 SAE 2002-01-0708
- Brooks, T. Lumsden, G. Blaxill H. “Improving Base Engine Calibrations for Diesel Vehicles Through the Use of DoE and Optimization Techniques,” Powertrain and Fluid Systems Conference and Exhibition San Antonio, Texas, USA September 24-27 2005 SAE 2005-01-3833
- Knafl, A. Hagena, J. R. Filipi, Z. S. Assanis, D. N. “Dual-Use Engine Calibration: Leveraging Modern Technologies to Improve Performance-Emissions Tradeoff,” SAE Word Congress Detroit, Michigan April 11-14 2005 SAE 2005-01-1549
- Steiber, J. Trader, A. Reese, R. Bedard, M. Musial, M. Treichel, B. “Development of an Engine Test Cell for Rapid Evaluation of Advanced Powertrain Technologies Using Model-Controlled Dynamometers,” SAE Transactions-Journal of Passenger Cars- Electronics & Electrical Systems 115 2006 SAE 2006-01-1409
- Schuette, H. Ploeger, M. “Hardware-in-the-Loop Testing of Engine Control Units - A Technical Survey,” SAE 2007 World Congress and Exhibition Detroit, Michigan April 16-19 2007 SAE 2007-01-0500
- Philipp, O. Buhl, M. Diehl, S. Huber, M. Roehlich, S. Thalhauser, J. “Engine ECU Function Development Using Software-in-the-Loop Methodology,” SAE 2005 World Congress and Exhibition Detroit, Michigan 2005 SAE 2005-01-0049
- Caraceni, A. Cristofaro, F. D. Ferrana, F. Scala, S. “Benefits of Using a Real-Time Engine Model During Engine ECU Development,” SAE 2003 World Congress and Exhibition March 3-6 2003 SAE 2003-01-1049
- Guerrier, M. Cawsey, P. “The Development of Model-Based Methodologies for Gasoline IC Engine Calibration,” SAE Transactions-Journal of Engines 113 2004 SAE 2004-01-1466
- Rask, E. Sellnau, M. “Simulation-Based Engine Calibration: Tools, Techniques, and Applications,” SAE Transactions-Journal of Engines 113 2004 SAE 2004-01-1264
- Wu, B. Prucka, R. G. Filipi, Z. S. Kramer, D. M. Ohl, G. L. “Cam-Phasing Optimization Using Artificial Neural Networks as Surrogate Models∼Maximizing Torque Output,” SAE Transactions-Journal of Engines 114 2005 SAE 2005-01-3757
- Jankovic, M. Magner, S. “Fuel Economy Optimization in Automotive Engines,” Proceedings of the 2006 American Control Conference Minneapolis, MN, USA 2006
- Hagena, J. R. Filipi, Z. S. Assanis, D. N. “Transient Diesel Emissions: Analysis of Engine Operation During a Tip-In,” SAE 2006 World Congress Detroit, Michigan April 3-6 2006 SAE 2006-01-1151
- Wijetunge, R. S. Brace, C. J. Hawley, J. G. Vaughan, N. D. Horroocks, R. W. Bird, G. L. “Dynamic Behavior of a High-Speed, Direct-Injection Diesel Engine,” SAE Transactions-Journal of Engines 108 1999 SAE 1999-01-0829
- Clark, N. N. Gautam, M. Rapp, B. L. Lyons, D. W. Graboski, M. S. McCormick, R. L. Alleman, T. L. National, P. N. “Diesel and CNG Transit Bus Emissions Characterization by Two Chassis Dynamometer Laboratories: Results and Issues,” SAE Transactions-Journal of Fuels and Lubricants 108 1999 SAE 1999-01-1469
- Samulski, M. J. Jackson, C. C. “Effects of Steady-State and Transient Operation on Exhaust Emissions from Nonroad and Highway Diesel Engines,” SAE Transactions-Journal of Engines 107 1998 SAE 982044
- Green, R. M. “Measuring the Cylinder-to-Cylinder EGR Distribution in the Intake of a Diesel Engine During Transient Operation,” SAE Transactions-Journal of Engines 109 2000 SAE 2000-01-2866
- Burk, R. Jacquelin, F. Wakeman, R. “A Contribution to Predictive Engine Calibration Based on Vehicle Drive Cycle Performance,” SAE 2003 World Congress Detroit, Michigan, USA March 3-6 2003 SAE 2003-01-0225
- Jacquelin, F. Burk, R. Wakeman, R. J. “Cam Phaser Actuation Rate Performance Impact on Fuel Consumption and NO x Emissions Over the FTP-75 Drive Cycle,” SAE 2003 World Congress Detroit, Michigan, USA 2003 SAE 2003-01-0023
- Atkinson, C. Mott, G. “Dynamic Model-Based Calibration Optimization: An Introduction and Application to Diesel Engines,” SAE World Congress Detroit, Michigan April 11-14 2005 SAE 2005-01-0026
- Malikopoulos, A. A. Papalambros, P. Y. Assanis, D. N. “A Learning Algorithm for Optimal Internal Combustion Engine Calibration in Real Time,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences Computers and Information in Engineering Conference Las Vegas, Nevada September 4-7 2007
- Malikopoulos, A. A. Papalambros, P. Y. Assanis, D. N. “A State-Space Representation Model and Learning Algorithm for Real-Time Decision-Making Under Uncertainty,” Proceedings of the 2007 ASME International Mechanical Engineering Congress and Exposition Seattle, Washington November 11-15 2007
- Malikopoulos, A. A. Assanis, D. N. Papalambros, P. Y. “Real-Time, Self-Learning Optimization of Diesel Engine Calibration,” Proceedings of the 2007 Fall Technical Conference of the ASME Internal Combustion Engine Division Charleston, South Carolina October 14-17 2007
- Kumar, P. R. Varaiya, P. Stochastic Systems Prentice Hall June 1986
- Bertsekas, D. P. Dynamic Programming and Optimal Control (Volumes 1 and 2 ) Athena Scientific September 2001
- Kemeny, J. G. Snell, J. L. Finite Markov Chains 1st Springer December 5 1983
- Puterman, M. L. Markov Decision Processes: Discrete Stochastic Dynamic Programming 2nd Wiley-Interscience 2005
- Gosavi, A. “Reinforcement Learning for Long-Run Average Cost,” European Journal of Operational Research 155 654 74 2004
- http://www.tesis.de/en/