Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Optimal and Robust Design of the PEM Fuel Cell Cathode Gas Diffusion Layer

Journal Article
2008-01-1217
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2008-01-1217
Published April 14, 2008 by SAE International in United States
Optimal and Robust Design of the PEM Fuel Cell Cathode Gas Diffusion Layer
Sector:
Citation: Zhang, Z., Wang, X., Li, J., Mourelatos, Z. et al., "Optimal and Robust Design of the PEM Fuel Cell Cathode Gas Diffusion Layer," SAE Int. J. Mater. Manf. 1(1):618-630, 2009, https://doi.org/10.4271/2008-01-1217.
Language: English

References

  1. Mathias M. Roth J. Fleming J. Lehnert W. “Diffusion media materials and characterization,” Handbook of Fuel Cells-Fundamentals, Technology and Applications vol. 3 John Wiley and Sons 2003
  2. Pharoah J. G. “On the permeability of gas diffusion media used in PEM fuel cells,” Journal of Power Sources 2005 144 77 82
  3. Lee H. K. Park J. H. Kim D.Y. Lee T. H. “A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC,” Journal of Power Sources 2004 131 200 206
  4. Senn S. M. Poulikakos D. “Multiphase transport phenomena in the diffusion zone of a PEM fuel cell,” ASME Journal of Heat Transfer 2005 127 1245 1259
  5. Chu H. S. Yeh C. Chen F. “Effects of porosity changes of gas diffuser on performance of proton exchange membrane fuel cell,” Journal of Power Sources 2003 123 1 9
  6. Jeng K. T. Lee S. F. Tsai G. F. Wang C. H. “Oxygen mass transfer in PEM fuel cell gas diffusion layers,” Journal of Power Sources 2005 144 77 82
  7. Jordan L. R. Shukla A. K. Behrsing T. et al. “Diffusion layer parameters influencing optimal fuel cell performance,” Journal of Power Sources 2000 86 250 254
  8. Roshandel R. Farhanieh B. Saievar-Iranizad E. “The effects of porosity distribution variation on PEM fuel cell performance,” Renewable Energy 2005 30 1557 1572
  9. Wu J. Liu Q. Fang H. “Toward the optimization of operating conditions for hydrogen polymer electrolyte fuel cells,” Journal of Power Sources 2006 156 388 399
  10. Mawardi A. Yang F. Pitchumani R. “Optimization of the operating parameters of a proton exchange membrane fuel cell for maximum power density,” Journal of Fuel Cell Science and Technology 2005 2 121 135
  11. Grujicic M. Chittajallu K. M. “Optimization of the cathode geometry in polymer electrolyte membrane fuel cells,” Chemical Engineering Science 2004 59 5883 5895
  12. Grujicic M. Zhao C. L. Chittajallu K. M. Ochterbeck J. M. “Cathode and interdigitated air distributor geometry optimization in polymer electrolyte membrane (PEM) fuel cells,” Materials Science and Engineering B 2004 108 241 252
  13. Zhang Z. Wang X. Zhang X. Yu F. “Optimizing the performance of a PEM fuel cell using the Powell algorithm,” The 4th ASME International Conference on Fuel Cell Science, Engineering and Technology Irvine, California 2006
  14. Wang C. Y. Cheng P. “A multiphase mixture model for multiphase, multicomponent transport in capillary porous media-I. Model development,” International Journal of Heat and Mass Transfer 1996 39 3607 3618
  15. Pharoah J. G. “On the permeability of gas diffusion media used in PEM fuel cells,” Journal of Power Sources 2005 144 77 82
  16. Mazumder S. Cole J. V. “Rigorous 3-D mathematical modeling of PEM fuel cells I. Model predictions without liquid water transport,” Journal of the Electrochemical Society 2003 150 A1503 A1509
  17. Springer T. E. Zawodzinski T. A. Gottesfeld S. “Polymer electrolyte fuel cell model,” Journal of the Electrochemical Society 1991 138
  18. Um S. Wang C. Y. “Three dimensional analysis of transport and reaction in proton exchange membrane fuel cells,” Proceedings of the ASME Fuel Cell Division Orlando, FL 2000
  19. Wang L. Liu H. “Performance studies of PEM fuel cells with interdigitated flow fields,” Journal of Power Sources 2004 134 185 196
  20. iSIGHT User's Guide 2003 www.engineous.com
  21. Hardy R. “Multiquadratic equations of topography and other irregular surfaces,” Journal of Geophysical Research 1971 76 1905 1915
  22. McKay M.D. Beckman R.J. Conover W.J. “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code,” Technometrics 1979 21 2 239 245
  23. Li K.Q. Sudjianto A. “Algorithmic construction of optimal symmetric latin hypercube designs,” Journal of Statistical Planning and Inference 2000 90 145 159

Cited By

Recommended Content

Technical Paper Effect of Cross Flow on Performance of a PEM Fuel Cell
Technical Paper Numerical and Experimental Investigation of the Thermal Behavior of a Complete Exhaust System
Technical Paper Transient Response of Minichannel Heat Exchanger Using Al 2 O 3 -EG/W Nanofluid