This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Cutting Force Evaluation Based On Total Energy Consumption
Technical Paper
2008-01-1131
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents a methodology for practical estimation of the cutting force and cutting power. Providing a complete list of mathematical expressions needed for the calculation, the paper demonstrates their utility for turning operation of two work materials: AISI bearing steel E52100 and aerospace aluminum alloy 2024 T6. The calculated cutting forces are in good agreement with the experimental results. Energy partition in the cutting system and relative impact of the parameters of the machining regime are discussed. For the first time, a simple practical method is available for the calculation of the total cutting power and the cutting force.
Recommended Content
Technical Paper | A Study to Predict Fatigue Limits of Bolted Joints under Transverse Vibration |
Technical Paper | Portable 2 Axis Milling Machine for CFRP |
Technical Paper | High Power CO2 Laser Aluminum Tailored Blank Welding |
Authors
Citation
Astakhov, V. and Xiao, X., "Cutting Force Evaluation Based On Total Energy Consumption," SAE Technical Paper 2008-01-1131, 2008, https://doi.org/10.4271/2008-01-1131.Also In
References
- Usui, E. 1988 Progress of “predictive” theories in metal cutting JSME International Journal 31 363 369
- Usui, E. Shirakashi, T. 1982 Mechanics of metal cutting - from “description” to “predictive” theory Phoenix, USA Production Engineering Division (PED), ASME
- Shaw, M. C. 1984 Metal Cutting Principles Oxford Oxford Science Publications
- Stenphenson, D. A. Agapiou, J.S. 1996 Metal Cutting Theory and Practice New York Marcel Dekker
- Oxley, P.L.B. 1989 Mechanics of Machining: An Analytical Approach to Assessing Machinability John Wiley & Sons New York, USA
- Finnie, I. 1956 Review of the metal-cutting analysis of the past hundred years Mechanical Engineering 78 1956 715 721
- Time, I. 1870 Resistance of Metals and Wood to Cutting Dermacow Press House St. Petersbourg, Russia
- Zvorykin, K.A. 1896 On the force and energy needed to separate the chip from the workpiece 123 57 96
- Merchant, M.E. Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip Journal of Applied Physics 16 1945 267 275
- Merchant, E. 2003 An Interpretive Review of 20th Century US Machining and Grinding Research TechSolve, Inc Cincinnati (OH) USA
- Astakhov, V.P. 2006 Tribology of Metal Cutting Elsevier London
- Outeiro, J.C. 2003 Application of Recent Metal Cutting Approaches to the Study of the Machining Residual Stresses Department of Mechanical Engineering. University of Coimbra Coimbra 340
- Astakhov, V.P. Shvets, S. 2004 The assessment of plastic deformation in metal cutting Journal of Materials Processing Technology 146 193 202
- Astakhov, V.P. 1998 Metal Cutting Mechanics CRC Press Boca Raton, USA
- Ivester, R.W. 2004 Comparison of machining simulations for 1045 steel to experimental measurements SME Paper TPO4PUB336 1 15
- Astakhov, V.P. Shvets, S.V. 2001 A novel approach to operating force evaluation in high strain rate metal-deforming technological processes Journal of Materials Processing Technology 117 226 237
- Shet, C. Chandra, N. 2002 Analysis of energy balance when using cohesive zone models to simulate fracture process ASME Journal of Engineering Materials and Technology 124 440 450
- Zorev, N.N. 1966 Metal Cutting Mechanics Pergamon Press Oxford
- Astakhov, V.P. Osman, M.O.M. Al-Ata, M. 1997 Statistical design of experiments in metal cutting - Part 1: Methodology Journal of Testing and Evaluation 25 322 327
- Astakhov, V.P. 2004 An application of the random balance method in conjunction with the Plackett-Burman screening design in metal cutting tests Journal of Testing and Evaluation 32 32 39
- Astakhov, V. P. 2004 The assessment of cutting tool wear International Journal of Machine Tools and Manufacture 44 637 647
- Atkins, A. G. Mai, Y.W. 1985 Elastic and Plastic Fracture: Metals, Polymers Ceramics, Composites, Biological Materials New York John Wiley & Sons
- Atkins, A. G. 2003 Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems International Journal of Mechanical Science 43 373 396
- Atkinson, C. 1979 Stress singularities and fracture mechanics Applied Mechanics Review 32 3 123 135
- Barrenblatt, G. I. 1962 Mechanical theory of equilibrium cracks Advances in Applied Mechanics New York Academic Press 55 125
- Dugdale, D. S. 1960 Yielding of steel sheets containing slits Journal of the Mechanics and Physics of Solids 8 100 104
- Rosa, P.A.R. Martins, P.A.F. Atkins, A.G. 2007 Revising the fundamentals of metal cutting by means of finite elements and ductile fracture mechanics International Journal of Mach. Tools and Manufact. 47 607 617
- Astakhov, V.P. 2005 On the inadequacy of the single-shear plane model of chip formation International Journal of Mechanical Science 47 1649 1672
- Wright, P.K. Trent, E.M. 2000 Metal Cutting Dutterworth-Heinemann Boston