This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of P Orientation {011}〈566〉 in a Continuous Cast Al-Mn-Mg Alloy with Pre-Heat Treatment
Technical Paper
2008-01-1097
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The as-received continuous cast Al-Mn-Mg alloy sheet was heat treated at 420°C, cold rolled to different thickness reductions, and then annealed at 510°C for 4 hours. The evolution of microstructures and crystallographic textures in the alloy during such thermo-mechanical treatment was investigated. It was found that a strong P orientation {011}〈566〉 formed in these samples. With increase in cold rolling reduction, the recrystallized grain structure became more elongated and the strong P orientation developed. These might be attributed to the pinning of dislocations and grain boundaries by the fine precipitates formed during the pre-cold roll annealing rather than concurrent precipitation during recrystallization annealing.
Authors
- Qiang Zeng - Center for Chemical and Materials Engineering, University of Kentucky
- Jianhui Xu - Center for Chemical and Materials Engineering, University of Kentucky
- Xiuping Jiang - Center for Chemical and Materials Engineering, University of Kentucky
- Tony Zhai - Center for Chemical and Materials Engineering, University of Kentucky
- Xiyu Wen - Center for Chemical and Materials Engineering, University of Kentucky
Citation
Zeng, Q., Xu, J., Jiang, X., Zhai, T. et al., "A Study of P Orientation {011}〈566〉 in a Continuous Cast Al-Mn-Mg Alloy with Pre-Heat Treatment," SAE Technical Paper 2008-01-1097, 2008, https://doi.org/10.4271/2008-01-1097.Also In
References
- Liu J. Morris J.G. Mater. Sci. Eng. A 2003 357 277 96
- Morris J.G Li Z. Chen L. Das S.K. Aluminum 1990 11 1069 73
- Liu Y.L. Liu Y. Morris J.G. Aluminum Transactions 2000 2 97 105
- Liu J.T. Liu Y.S. Morris J.G. Mater. Sci. Tech. 2003 19 1498 1506
- Li J. Liu W.C. Zhai T. Kenik E.A. Scripta Mater. 2005 52 163 68
- Liu W.C. Zhai T. Man C-S. Radhakrishnan B. Morris J.G. Phil. Mag. 2004 84 3305 21
- Alvi M.H. Cheong S. Weiland H. Rollett A.D. Mater. Sci. Forum 2004 467-470 357 62
- Engler O. Hirsch J. Lucke K. Acta Metall. Mater. 1995 43 121 38
- Daaland O. Nes E. Acta Mater. 1996 44 1413 35
- Liu J. T. Morris J. G. Metal.l Mater. Trans. A 2003 34A 2029 32
- Morris J. G. Liu W. C. JOM 2005 57 44 47
- Schulz L. G. J. Appl. Phys. 1949 20 1033 36
- Cai M. J. Lee W. B. Mater. Sci. Forum 1994 157-162 327 32
- Benum S. Nes E. Acta Mater. 1997 45 4593 4602
- Roy R. K. Kar S. Das K. Das S. J. Mater. Sci. 2006 41 1039 45
- Chen L. Morris J. G. Scripta Metall. 1984 18 1365 70
- Zeng Q. Wen X. Zhai T. A study of recrystallization fiber textures in continuous cast Al-Mn-Mg alloy Mater. Sci. Tech.
- Zeng Q. Wen X. Zhai T. A Study of Recrystallization Behavior in a Continuous Cast Al-Mn-Mg Alloy Phil. Mag. A
- Liu W. C. Morris J. G. Scripta Mater. 2007 56 217 20
- Daaland O. Nes E. Acta Mater. 1996 44 1389 1411
- Humphreys F. J. Hatherly M. Recrystallization and Related Annealing Phenomena 2nd 2004 Elsevier
- Engler O. Yang P. Kong X. W. Acta Mater. 1996 44 3349 69
- Zeng Q. Kenik E. A. Zhai T. The Formation of P Orientation in the Cold Rolled Continuous Cast Al-Mn-Mg Alloy Sheet during Annealing Metal. Mater. Trans.