This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Impact of A/F Ratio on Ion Current Features Using Spark Plug with Negative Polarity

Journal Article
2008-01-1005
ISSN: 1946-4614, e-ISSN: 1946-4622
Published April 14, 2008 by SAE International in United States
Impact of A/F Ratio on Ion Current Features Using Spark Plug with Negative Polarity
Sector:
Citation: Abdel-Rehim, A., Henein, N., and VanDyne, E., "Impact of A/F Ratio on Ion Current Features Using Spark Plug with Negative Polarity," SAE Int. J. Passeng. Cars - Electron. Electr. Syst. 1(1):432-445, 2009, https://doi.org/10.4271/2008-01-1005.
Language: English

References

  1. Powell, J. D. “Engine Control Using Cylinder Pressure: Past, Present, and Future” Journal of Dynamic Systems, Measurements and Control 115 June 1993
  2. Tunestål, P. “Estimation of the In-Cylinder Air/Fuel Ratio of an Internal Combustion Engine by the Use of Pressure Sensor” Lund Institute of technology 2001
  3. Lee A. Wilcutts M. Tunestal P. Hedrick J. “A method of lean air-fuel ratio control using combustion pressure measurement” JSAE Review 22 2001 389 393 Elsevier 2001
  4. Ohata, A. Ohashi, M. Nasu, M. Inoue, T. “Model Based Air Fuel Ratio Control for Reducing Exhaust Gas Emissions” SAE 950075 , SAE International 1995
  5. Yasui, Y. Akazaki, S. Ueno, M. Iwaki, Y. “Secondary O2 Feedback Using Prediction and Identification type sliding Mode Control” SAE 2000-01-0936 , SAE International 2000
  6. Clements, R. M. Smy, P. R. “The Variation of Ionization with Air/Fuel ratio for Spark Ignition Engine” Journal of Applied Physics 47 2 February 1976
  7. Zhao H. Ladommatos N. “Engine performance monitoring using spark plug voltage analysis” Proceeding of the Institution of Mechanical Engineers 211 499 509 1997
  8. Auzins, J. Johansson, H. Nytomt, J. “Ion-Gap Sense in Misfire Detection, Knock and Engine Control” SAE 950004 , SAE International 1995
  9. An, F. Rizzoni, G. Upadhay, D. “Combustion diagnostics in methane-fueled SI engines using the spark plug as an ionization probe” SAE 970033 , SAE International 1997
  10. Upadhyay, D. Rizzoni, G. “AFR Control on a Single Cylinder Engine Using the Ionization Current” SAE 980203 , SAE International 1998
  11. Neij, H. Saitzkoff, A. Reinmann, A. Franke, A. Aldfen, M. “Application of two-dimensional laser-induced fuel tracer fluorescence for ion current evaluation” Comb. Sci. Technology 140 295 314 1998
  12. Bie, T. Ericsson, M. Rask, P. “A Novel Start Algorithm for CNG Engines Using Ion Sense Technology” SAE 2000-01-2800 , SAE International 2000
  13. Hellring, M. Munther, T. Rögnvaldsson, T. Wickström, N. Carlsson, C. Larsson, M. Nytomt, J. “Robust AFR estimation using the ion current and neural networks” SAE 1999-01-1161 , SAE International 1999
  14. Klüovmark H. Rask P. Forssell U. “Estimating the air/fuel ratio from gaussian parametrizations of the ionization in internal combustion SI engines” SAE, 2000-01-1245 2000
  15. Saitzkoff, A. Reinmann, R. Mauss, F. Glavmo, M. Berglind, T. “An ionization equilibrium analysis of the spark plug as an ionization sensor SAE 960337 , SAE International 1996
  16. Reinmann, R. Saitzkoff, A. Mauss, F. “Local air-fuel ratio measurements using the spark plug as an ionization sensor” SAE 970856 , SAE International 1997
  17. Saitzkoff, A. Reinmann, R. Mauss, F. Glavmo, M. “In-cylinder pressure measurements using the spark plug as an ionization sensor” SAE 970857 , SAE International 1997
  18. Calcote, H. F. “Ion Production and Recombination in flames” Eight (International) Symposium on Combustion 184 199 1962
  19. Arrigoni, V. Calvi, F. Cornetti, G. M. Pozzi, U. “Turbulent flame structure as determined by pressure development and ionization intensity” SAE 730088 , SAE International 1973
  20. Abdel-Rehim, A. Henein, N. VanDyne Ed “Ionization Current in a Spark Ignition Engine Using Negative Polarity on Center Electrode SAE 2007-01-0646 , SAE International 2007

Cited By