This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Integrated Chassis Design Procedure Using the PIDO Technology
Technical Paper
2008-01-0884
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The study presented in this paper proposes an integrated and automated chassis design process, in which the associated design and analysis, including kinematic design and controller calibration, are sequentially performed through three steps. The first step is an automated kinematic design process that optimizes the hardpoints' coordinates and bush properties. First, ADAMS/Car is employed to evaluate the K&C characteristics by varying arrangements of the hardpoints and bush properties. In addition, a bush stiffness curve is approximated and represented by four parameters, allowing a designer to incorporate the curve as the design variables in the optimization process. Second, an optimization process is employed to automate the calibration of the UCC system modeled by Simulink, which is essential in improving the vehicle's dynamic behavior. The kinematic design information extracted from the ADAMS/Car model is fed into a vehicle model constructed by CarSim that can estimate the vehicle's dynamic behavior. Lastly, both the kinematic design and the controller calibration processes are integrated and automated using the PIDO technology. P.I.A.n.O.(Process Integration, Automation, and Optimization), a design framework tool developed based on the PIDO technology, coordinates the data processing from the kinematic design modules to the UCC calibration modules, and controls the sequence of executing the different modules. In this new kinematic design environment, 14 significant performances are identified to characterize the K&C characteristics. A fish-hook test and a double lane change test are performed. In these tests, the UCC system is calibrated so that the vehicle's dynamic behavior (yaw rate, side slip angle, etc) is stabilized.
Recommended Content
Authors
Citation
Choi, B., Choi, D., Kim, H., and Lee, H., "An Integrated Chassis Design Procedure Using the PIDO Technology," SAE Technical Paper 2008-01-0884, 2008, https://doi.org/10.4271/2008-01-0884.Also In
References
- Lu Jianbo DePoyster Mark “Multiobjective Optimal Suspension Control to Achieve Integrated Ride and Handling Performance,” IEEE Transaction On Control System Technology 10 6 807 821 Nov. 2002
- Fadel Georges Haque Imtiaz Blouin Vincent Wiecek Margaret “Multi-criteria Multi-scenario Approaches in the Design of Vehicles,” 6th World Congress of Sturctural and Multidisciplinary Optimization Rio de Janeeiro 30 May 03 June 2005
- Rauh Jochen “Virtual Development of Ride and Handling Characteristics for Advanced Passenger Cars,” Vehicle System Dynamics 40 1-3 135 155 2003
- Choi Byung-Lyul Choi Jin-Ho Choi Dong-Hoon “Reliability-based design optimization of an automotive suspension system for enhancing kinematic and compliance characteristics,” International Journal of Automotive Technology 6 3 235 242 2005
- Yoon SangHo Kim DongShin “Development of Rollover Prevention System Using Unified Chassis Control of ESP and CDC Systems,” SAE International SP-2018, Paper No. 2006-01-1276 Apr. 2006
- Kim Hyunsup Lee Hyeongcheol Joeng Jiyoel “Unified Chassis Control for the Vehicle Having AFS, ESP and Active Suspension.” KSAE 928 933 2007
- Kim Jong-Rip Choi Dong-Hoon “Enhanced Two-point Diagonal Quadratic Approximation Methods for Design Optimization.” Computer Methods in Applied Mechanics and Engineering 197 6-8 846 856 2008
- Hong Kyung-Jin “Trust Region Managed Sequential Approximate Optimization with Response Surface Modeling.” Hanyang Univ. 2004