This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Coupling Nodal and Multi-Zone Combustion Models to Describe Thermal Diesel Engine Behavior
Technical Paper
2008-01-0845
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Engine thermal behavior has been solved previously in steady and transient conditions thanks to a lumped capacity model, also called nodal model. But serious shortcomings appear in the heat flux formulation introduced in the model. In this paper, we show that using steady-state maps of heat transfer coefficients to simulate transient thermal response of diesel engines is not sufficient. The heat transfer is strongly influenced by the injection pattern, the intake air conditions and the walls temperatures, which are not taken into account in the previous model. Introducing a single cylinder multi-zone combustion model, a better description of the combustion process and so of the heat release can be obtained. The coupled models are used to describe a 1,9l, 4-cylinder direct injection diesel engine during a warm-up. The results (oil and coolant temperatures) show a good agreement between measures and simulations. This approach offers a great potential for further applications. The coupled models can be used to investigate new engine control strategies in order to improve its warm-up, notably in cold conditions. It also opens the possibility to expand the simulation on emission limits. It is a complete and robust tool to study transient diesel engine behavior.
Recommended Content
Authors
Topic
Citation
Charmantray, C., Champoussin, J., and Yu, R., "Coupling Nodal and Multi-Zone Combustion Models to Describe Thermal Diesel Engine Behavior," SAE Technical Paper 2008-01-0845, 2008, https://doi.org/10.4271/2008-01-0845.Also In
References
- Jarrier L. Champoussin J.C. Yu R. Gentile D. “Warm-up of a D.I. Diesel Engine: Experiment and Modeling” SAE Paper No. 2000-01-0299 2000
- Zitouni H. septembre 1991
- Woschni G. “A universal applicable equation for the instantaneous heat transfer coefficient in the internal combustion engines” SAE Paper No. 670931 1967
- Murrell J. D. Lewis G. M. Assanis D. N. “An Early-Design Methodology for predicting Transient Fuel Economy and Catalyst-Out Exhaust Emissions” SAE Paper No. 971838 1997
- Tomaselli L. Alexandre A. 2002
- Douxchamps P-A. Leduc B. “Diesel engine thermal modeling _coupling between thermodynamic and nodal models” VTMS 8 SAE Conference Nottingham 2007
- Wiebe I. Moscow 1956 Sitkei G. 156 159 Springer-Verlag Berlin 1964
- Baker D.M. Assanis D. “A coupled methodology for modeling the transient thermal response of SI Engines Subject to time-varying operating conditions” SAE Paper No. 971859 1997
- Yoshizaki T. Nishida K. Hiroyasu H. “Approach to low NOx and smoke emissions engines by using phenomenological simulation” SAE Paper No. 930612 1993
- GT-Power User's Manual GT-SUITE Version 6.1 April 2004
- Morel T. Wahiduzzaman S. “Modeling for the prediction of pollutants emissions and performance of DI Diesel engines” 1996 FISITA Proceedings, 26 th International Congress Praha, Czech Republic June 17-21 1996