This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Heat Transfer Model for Scooter Engines
Technical Paper
2008-01-0387
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A heat transfer model for small-scale spark-ignition engines has been proposed by authors in previous study. However, this model is only based on single engine, it may not be suitable for the others. In order to improve the accuracy of predicted heat transfer rate for different small-scale engines, another heat transfer model using Stanton number based on two engines is proposed. Prediction results of instantaneous heat flux and global heat transfer based on the proposed model are compared with the experimental results and prediction results of previous model. It is found that the proposed model has prediction results closer to the measured data than the previous models.
Recommended Content
Authors
Citation
Wu, Y., Chen, B., Hsieh, F., and Ke, C., "Heat Transfer Model for Scooter Engines," SAE Technical Paper 2008-01-0387, 2008, https://doi.org/10.4271/2008-01-0387.Also In
References
- Oguri T. “On the Coefficient of Heat Transfer Between Gases and Cylinder Walls of the Spark- Ignition Engine,” Bulletin of the JSME 3 11 1960 363 369
- Alkidas A. C. “Heat transfer Characteristics of a Spark-Ignition Engine,” ASME Journal of Heat Transfer 102 1980 189 193
- Alkidas A. C. Myers J. P. “Transient Heat-Flux Measurements in the Combustion Chamber of a Spark-Ignition Engine,” ASME Journal of Heat Transfer 104 1982 62 67
- Aldidas A. C. Suh I.-S. “The Effects of Intake-Flow Configuration on the Heat-Release and Heat-Transfer Characteristics of a Single-Cylinder Four-Valve S.I. Engine,” SAE Paper No. 910296 1991
- Shayler P. J. May S. A. Ma T. “The Determination of Heat Transfer from the Combustion Chambers of SI Engines,” SAE Paper No. 931131
- Franco A. Martorano L. “Evaluations on the Heat Transfer in the Small Two-Stroke Engines,” SAE Paper No. 980762 1998
- Wu Y.-Y. Chen B.-C. Hsieh F.-C. “Heat Transfer Model for Small-Scale Air-Cooled Spark Ignition Four-Stroke Engines,” International Journal of Heat and Mass Transfer 49 21-22 October 2006 3895 3905
- Lumley J. L. “Engines an Introduction,” Cambridge University Press 1999 95 117
- Heywood J. B. “Internal Combustion Engine Fundamentals,” McGraw-Hill New York 1988
- Taylor C. F. “The Internal Combustion Engine in Theory and Practice,” 1 M.I.T. Press Cambridge, MA 1966 266 290
- Brunt M. F. J. Rai H. Emtage L. A. “The Calculation of Heat Release Energy from Engine Cylinder Pressure Data,” SAE Paper No. 981052
- Borman G. Nishiwaki K. “Internal-Combustion Engine Heat Transfer,” Progress in Energy and Combustion Science 13 1987 1 46
- Labelle P. Pekgularyuz M. Bouchard R. “New Aspects of Temperature Behavior of AJ52x, Creep Resistant Magnesium Alloy,” SAE Paper No. 2002-01-0079
- Lindfield G. Penny J. “Numerical Methods Using Matlab,” Prenticae Hall 1999
- Annand W. J. D. “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines,” Proceedings of the Institution of Mechanical Engineers 177 36 1963 973 990
- Rakopoulos C. D. Mavropoulos G. C. Hountalas D. T. “Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air-cooled diesel engine,” International Journal of Energy Research 24 7 2000 587 604
- Corporation Medtherm “Product Information Coaxial Surface Thermocouple Probes,” Huntsville, Alabama USA