This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dual Phase High Temperature Heat Release Combustion
Journal Article
2008-01-0007
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Shibata, G. and Urushihara, T., "Dual Phase High Temperature Heat Release Combustion," SAE Int. J. Engines 1(1):1-12, 2009, https://doi.org/10.4271/2008-01-0007.
Language:
English
References
- Aroonsrisopon, T. Nitz, D. Waldman, T. Foster, D. “A Computational Analysis of Direct Fuel Injection During the Negative Valve Overlap period in an Iso-Octane Fueled HCCI Engine” SAE Technical Paper, No. 2007-01-0227 2007
- Sjoberg, M. Dec, J. “Combined Effect of Fuel-Type and Engine Speed on Intake Temperature Requirement completeness of Bulk-Gas Reactions” SAE Technical Paper, No. 2003-01-3173 2003
- Dec, J. Sjoberg, M. “Isolating the Effects of Fuel Chemistry on Combustion Phasing in an HCCI Engine and the Potential of Fuel Stratification for Ignition Control” SAE Technical Paper, No. 2004-01-0557 2004
- Sjoberg, M. Dec, J. “Smoothing HCCI Heat-Release Rates Using Partial Fuel Stratification with Two-Stage Ignition Fuels” SAE Technical Paper, No. 2006-01-0629 2006
- Bessonette, P. Schleyer, C. Duffy, K. Hardy, W. Liechty, M. “Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion” SAE Technical Paper, No. 2007-01-0191 2007
- Ryan, T. Matheaus, A. “Fuel Requirements for HCCI Engine” SAE Technical Paper, No. 2003-01-1813 2003
- Ryan T. III Callahan, T. Mehta, D. “HCCI in a Variable Compression Ratio Engine-Effects of Engine Variables” SAE Technical Paper, No. 2004-01-1971 2004
- Shibata, G. Oyama, K. Urushihara, T. Nakano, T. “The Effect of Fuel Properties on Low and High Temperature Heat Release and Resulting Performance of an HCCI Engine” SAE Technical Paper, No. 2004-01-0553 2004
- Koopmans, L. Stromberg, E. Denbratt, I. “The Influence of PRF and Commercial Fuels with High Octane Number on the Auto-ignition Timing of an Engine Operated in HCCI Combustion Mode with Negative Valve Overlap” SAE Technical Paper, No. 2004-01-1967 2004
- Leppard, W. “A Comparison of Olefin and Paraffin Autoignition Chemistries: A Motored Engine Study” SAE Technical Paper 892081 1989
- Bunting, B. “Combustion, Control, and Fuel Effects in a Spark Assited HCCI Engine Equipped with Variable Valve Timing” SAE Technical Paper, No. 2006-01-0872 2006
- Orlandini, I. Kulzer, A. Weberbauer, F. Rauscher, M. “Simulation of Self Ignition in HCCI and Partial HCCI Engines Using a Reduced Order Model” SAE Technical Paper, No. 2005-01-0159 2005
- Sato, S. Jun, D. Kweon, S. Yamashita, D. Iida, N. “Basic Research on the Suitable Fuel for HCCI Engine from the Viewpoint of Chemical Reaction” SAE Technical Paper, No. 2005-01-0149 2005
- Konno, M. Chen, Z. “Ignition Mechanisms of HCCI Combustion Process Fueled with Methane/DME Composite Fuel” SAE Technical Paper, No. 2005-01-0182 2005
- Yamada, H. Sakanashi, H. Choi, N. Tezaki, A. “Simplified Oxidation Mechanism of DME applicable for Compression Ignition” SAE Technical Paper, No. 2003-01-1819 2003
- Yamada, H. Yoshii, M. Tezaki, A. “Chemical mechanistic analysis of additive effects in homogeneous charge compression ignition of dimethyl ether” Proceedings of the Combustion Institute 30 2005 2773 2780
- Yamada, H. Ohtomo, M. Yoshii, M. Tezaki, A. “Controlling mechanism of ignition enhancing and suppressing additives in premixed compression ignition” Int. J. Engine Res. 6 331 340 IMechE 2005
- Ogawa, H. Miyamoto, N. Kaneko, N. Ando, H. “Combustion Control and Operating Range Expansion in an HCCI engine with Selective Use of Fuels with Different Low-Temperature Oxidation Characteristics” SAE Technical Paper, No. 2003-01-1827 2003
- Ogawa, H. Miyamoto, N. Kaneko, N. Ando, H. “Combustion Control and Operating Range Expansion in an HCCI Engine with Reaction Inhibitors” International Journal of Engine Research IMechE 6 342 359 2005
- Ogawa, H. Kaneko, N. Ando, H. Miyamoto, N. “Combustion Control and Operating Range Expansion with Direct Injection of Reactions Suppressors in a Premixed DME HCCI Engine” SAE Technical Paper, No. 2003-01-0746 2003
- Kalghatgi, G. “Fuel Anti-Knock Quality-Part I, Engine studies” SAE Technical Paper, No. 2001-01-3584 2001
- Kalghatgi, G. “Fuel Anti-knock Quality-Part II, Vehicle Studies-How Relevant is Motor Octane Number (MON) in Modern Engines?” SAE Technical Paper No. 2001-01-3585 2001
- Kalghatgi, G. Risberg, P. Angstrom, H. “A Method of Defining Ignition Quality of Fuels in HCCI Engines” SAE Technical Paper, No. 2003-01-1816 2003
- Kalghatgi, G. Head, R. “The Available and Required Autoignition Quality of Gasoline-like Fuels in HCCI Engines at High Temperatures” SAE Technical Paper, No. 2004-01-1969 2004
- Risberg, P. Kalghatgi, G. Angstrom, H. “The Influence of EGR on Auo-ignition Quality of Gasoline-like Fuels in HCCI Engines” SAE Technical Paper, No. 2004-01-2952 2004
- Aroonsrisopon, T. Foster, D. Morikawa, T. Iida, M. “Comparison of HCCI Operating Range for Combinations of Intake Temperature, Engine Speed and Fuel Composition” SAE Technical Paper, No. 2002-01-1924 2002
- Shibata, G. Oyama, K. Urushihara, T. Nakano, T. “Correlation of Low Temperature Heat Release with Fuel Composition and HCCI Engine Combustion” SAE Technical Paper, No. 2005-01-0138 2005
- Westbrook, C. “Chemical Kinetics of Hydrocarbon Ignition in Practical Combustion Systems” Proceeding of the Combustion Institute 28 1563 1577 2000
- Tanaka, S. Ayala, F. Keck, J. “A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine” Combustion and Flame 133 467 481 2003
- Eng, J. Leppard, W. Sloane, T. “The Effect of POx on the Autoignition Chemistry of n-Heptane and Isooctane in an HCCI Engine” SAE Technical Paper, No. 2002-01-2861 2002
- Tezaki, A. “Diesel Combustion: Chemical Kinetics” JSAE Technical Paper, No. 20054246 2005
- Yamada, H. Yoshii, M. Tezaki, A. “A Chemical Mechanistic Analysis on Compression Ignition Process of Straight Chain Alkanes” SAE Technical Paper, No. 2004-01-1912 2004
- Shibata, G. Urushihara, T. “The Interaction Between Fuel Chemicals and HCCI Combustion Characteristics Under Heated Intake Air Conditions” SAE Technical Paper, No. 2006-01-0207 2006
- Shibata, G. Urushihara, T. “Auto-Ignition Characteristics of Hydrocarbons and Development of HCCI Fuel Index” SAE Technical Paper, No. 2007-01-0220 2007
- Hiraya, K. Hasegawa, K. Urushihara, T. Iiyama, A. Itoh, T. “A Study on Gasoline Fueled Compression Ignition Engine: A Trial of Operation Region Expansion” SAE Technical Paper, No. 2002-01-0416 2002
- Steeper, R. Zilwa, S. “Improving the NOx-CO2 Trade- Off of an HCCI Engine Using a Multi-Hole Injector” SAE Technical Paper, No. 2007-01-0180 2007
- Berntsson, A. Denbratt, I. “HCCI Combustion Using Charge Stratification for Combustion Control” SAE Technical Paper, No. 2007-01-0210 2007
- Compton, G. Hancock, “Low Temperature Combustion and Autoignition” 115 1997