This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mixture Formation and Combustion Processes of Multi-Hole Nozzle with Micro Orifices for D.I. Diesel Engines
Technical Paper
2007-01-4049
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In order to investigate effects of the multi-hole nozzle with micro orifices on mixture formation processes in Direct-Injection Diesel engines, mixture characteristics were examined via an ultraviolet-visible laser absorption scattering (LAS) technique under various injectors. The injection quantity per orifice per cycle was reduced by nozzle hole sizes. The LAS technique can provide the quantitative and simultaneous measurements of liquid and vapor phases concentration distributions inside of the fuel spray. Mass of ambient gas entrained into the spray, liquid/ vapor mass and mean equivalence ratio of total fuel were obtained based on Lambert Beer's law. As a result, the leaner and more homogeneous fuel-gas mixture can be achieved by reducing the nozzle hole diameter, in the meanwhile more ambient gas were entrained into the spray. Moreover, relationships between mixture formation and D.I. Diesel combustion processes were examined by using an optical engine, which is adapted in the commercial passenger car's D.I. Diesel engine for experiment with the optical access from the bottom of the combustion chamber.
Recommended Content
Authors
Topic
Citation
Matsumoto, Y., Gao, J., Namba, M., and Nishida, K., "Mixture Formation and Combustion Processes of Multi-Hole Nozzle with Micro Orifices for D.I. Diesel Engines," SAE Technical Paper 2007-01-4049, 2007, https://doi.org/10.4271/2007-01-4049.Also In
References
- Kuwahara, K. Ando, H. Furutani, M. Ohta, Y. Impact of Formaldehyde Addition on Auto-Ignition in Engines COMODIA2004, CD-Rom Proceedings 2004
- Aoyagi, Y. Kunishima, E. Asaumi, Y. Aihara, Y. Odaka, M. Goto, Y. Diesel Combustion and Emission Study by Using of High Boost and High Injection Pressure in Single Cylinder Engine COMODIA2004, CD-Rom Proceedings 2004
- Yeh, C. Kamimoto, T. Kosaka, H. Kobori, S. Quantitative Measurement of 2-D Fuel Vapor Concentration in a Transit Spray via Laser-induced Fluorescence Technique SAE Paper No. 941953 1994
- Idicheria, C. A. Pickett, L. Quantitative Mixing Measurements in a Vaporizing Diesel Spray by Rayleigh Imaging SAE Paper No. 2007-01-0647 2007
- Minato, A. Tanaka, T. Nishimura, T. Investigation of Premixed Lean Diesel Combustion With Ultra-High- Pressure Injection SAE Paper No. 2005-01-0914 2005
- Weber, J. Model Calibration for Spray Penetration and Mixture Formation in a High-Pressure Fuel Spray Using a Micro-Genetic Algorithm and Optical Data SAE Paper No. 2005-01-2099 2005
- Bruneaux, G. Study of the Correlation Between Mixing and Auto-ignition Processes in High Pressure Diesel Jets SAE Paper No. 2007-01-0650 2007
- Milton, B. Ware, B. Milton, G. White, T. Gardner, T. Bevan, M. Further Development of the EDS, Single Fluid HEUI Injection System FISITA2006, CD-Rom Proceedings 2006
- Tokuda, H. Itoh, S. Kinugawa, M. DENSO Common Rail Technology to Successfully Meet Future Emission Regulation 26th Internationales Wiener Motorensymposium 2005 Vienna, Austria 2005
- Zhang, Y. Nishida, K. Nomura, S. Ito, T. Spray Characteristics of Group-Hole Nozzle for D.I. Diesel Engine SAE Paper No. 2003-01-3115 2003
- Gao, J. Matsumoto, Y. Nishida, K. Effects of Group-hole Nozzle Specifications on Fuel Atomization and Evaporation of Direct Injection Diesel Sprays 2007 JSAE/ SAE International Fuels and Lubricants Meeting, CD-ROM Proceedings, JSAE20077021/ SAE 2007-01-1889 2007
- Zhang, Y. Nishida, K. Yoshizaki, T. Characterization of Droplets and Vapor Concentration Distributions in Sprit-Injection Diesel Sprays by Processing UV and Visible Images JSME International Journal 46 1 100 108 2003
- Zhang, Y. Itoh, T. Nishida, K. Characterization of Mixture Formation in Split-Injection Diesel Sprays Via Laser Absorption-Scattering (LAS) Technique SAE Paper No. 2001-01-3498 2001
- Patterson, M. A Kong, S. C. Hampson, G. J. Reitz, R. D. Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and Nox Emissions SAE Paper No. 940523 1994
- Montgomery, D. T. Chan, M. Chang, C. T. Farrell, P.V. Reitz, R. D. Effect of Injector Nozzle Hole Size and Number on Spray Characteristics and the Performance of a Heavy-Duty D.I. Diesel Engine SAE Paper No. 962002 1996
- Kim, B. S. Hyeon, W. H. Ryu, S. H. Ha, J. S. Effect of the Injector Nozzle Hole Diameter and Number on the Spray Characteristics and the Combustion Performance in Medium-Speed Diesel Marine Engines SAE Paper, No. 2005-01-3853 2005
- Matsumoto, Y. Gao. J. Nishida, K. Effect of Injection Mass on Mixture Properties of D.I. Diesel Spray The 19th Internal Combustion Engine Symposium, CD-Rom Proceedings 2007
- Zhang, Y. Nishida, K. Yoshizaki, T. Quantitative Measurement of Droplets and Vapor Concentration Distributions in Diesel Sprays by Processing UV and Visible Images SAE Paper, No. 2001-01-1294 2001
- Zhang, Y. Yoshizaki, T. Nishida, K. Imaging of Droplets and Vapor Distributions in a Diesel Fuel Spray via Laser Light Absorption Scattering Technique Applied Optics 39 33 6221 6229 2000
- Hammond, D. C. Jr. Deconvolution technique for line-of-sight optical scattering measurements in axisymmetric sprays Appli. Opti. 20 3 493 498 1981
- Suzuki, S. Nishida, K. Hiroyasu, H. Simultaneous Concentration Measurement of Vapor and Liquid in an Evaporating Diesel Spray SAE Paper No. 930863 1993
- Ishikawa, S. Ohmori, Y. Suzuki, T. Takamura, A. Kamimoto, T. Measurement of Pilot Injection Quantity by Advanced Injection Rate Meter JSAE Spring Convention Proceedings 1999
- Takamura, A. Ohata, T. Fukushima, S. Kamimoto, T. A Study on Precise Measurement of Diesel Fuel Injection Rate SAE Paper No. 920630 1992
- Ohmori, Y. Ikeda, T. Takamura, A. Sato, Y. Jun, L. Kamimoto, T. Measurement of the Rate of Multiple Fuel Injection With Diesel Fuel and DME SAE Paper No. 2001-01-0527 2001