This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Friction Material Elastic Property Round Robin Study
Technical Paper
2007-01-3940
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
25th Annual Brake Colloquium
Language:
English
Abstract
A method for ultrasonic measurement of friction material elastic constants was evaluated through a round-robin process. The purpose of the study was two-fold: 1) to formulate and evaluate a standard test method (SAE J2725) for measuring elastic constants using ultrasound and 2) to quantify the measurement variability when the testing method is applied by multiple operators and instrumentation. The study involved measurement of 6 different friction materials by multiple operators at 5 different laboratories. All participants measured the same 6 samples. The friction material sample set ranged in density from 2.3 gm/cc to 3.2 gm/cc, the in-plane modulus varied from 11 GPa to 25 GPa, and the through-the-thickness modulus varied from 3 GPa to 7 GPa. All measurements were carried out at ambient temperature in accordance with procedures outlined in the draft SAE test specification (J2725).
Recommended Content
Technical Paper | Comparison of Results from Dynamic Tests of an Airplane Seat at Different Facilities |
Technical Paper | Relaxation of Thermoplastic Rotary Shaft Seals |
Technical Paper | Non-linear Aspects of Friction Material Elastic Constants |
Citation
Sanders, P. and Yuhas, D., "Friction Material Elastic Property Round Robin Study," SAE Technical Paper 2007-01-3940, 2007, https://doi.org/10.4271/2007-01-3940.Also In
SAE 2007 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V116-6; Published: 2008-08-15
Number: V116-6; Published: 2008-08-15
References
- Every A.G. “Determination of the Elastic Constants of Anisotropic Solids” NDT International 27 1 3 1993
- Hearmon, R.F.S. An Introduction to Applied Anisotropic Elasticity OUP Oxford 1961
- Sengupta, S. Lattice Theory of Elastic Constants Trans Tech Switzerland 1988
- Pollard, H.F. Sound Waves in Solids Pion, London 1977
- Schreiber, E. Anderson, O.L. Soga, M. Elastic Constants and Their Measurement McGraw-Hill New York 1973
- Truell, R. Elbaum, C. Chick, B.B. Ultrasonic Methods in Solid State Physics Academic New York 1969
- Every, A.G. McCurdy, A.K. Landolt-Bornstein New Series Group II 29a Madelung Springer Berlin 1992
- Squeal Disc Brake Chen Frank Tan Chin An Quaglia Ronald L. Yuhas D.E. Yuhas Marjorie P. Friction Material Elastic Constant Measurements 10 0-7680-1248-1
- SAE Brake Lining Standards Committee Works in Progress J2725 Friction Material Elastic Property Measurement www.sae.org
- Automobile Industry Action Group www.aiag.org
- MINITAB® Release 14.20
- http://en.wikipedia.org/wiki/Propagation̲of̲uncertainty