This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Experimental Investigation on the Spray Characteristics of DME Blended Biodiesel
Technical Paper
2007-01-3631
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The objective of this work is to analyze the macroscopic behavior of spray on the DME blended biodiesel at different mixing ratios by using spray visualization and injection rate system. The fuel spray structure of DME blended biodiesel and the development process of blended fuel spray was taken with the spray visualization system which consisted of a Nd:YG laser, an ICCD camera, high-pressure chamber and high pressure fuel supply system. The spray images were analyzed a spray tip penetration, a spray cone angle and a spray area distribution at various mixing ratio of DME by weight. The influence of different injection pressure and ambient pressure on the fuel spray characteristics are investigated for the various injection parameters.
Recommended Content
Authors
Citation
Bang, S., Ryu, B., and Lee, C., "An Experimental Investigation on the Spray Characteristics of DME Blended Biodiesel," SAE Technical Paper 2007-01-3631, 2007, https://doi.org/10.4271/2007-01-3631.Also In
References
- Kapus, P. Ofner, H. “Development of Fuel Injection Equipment and Combustion System for Dl Diesel Operated on Dimethyl Ether” SAE No. 950062 1995
- Yoshio, S. Akira, N. Takashi, S. Yuichi, G. Performance and Emission Characteristics of a DI Diesel Engine Operated on Dimethyl Ether Applying EGR with Supercharging SAE Tech. paper series, 2000-01-1809 2000
- Kim Myung Yoon Bang Seung Hwan Lee Chang Sik Experimental investigation of spray and combustion characteristics of dimethyl ether in a common-rail diesel engine Energy & Fuels 21 793 800 2007
- Kajitani, S. Chen, Z., L. Konno, M. Rhee, K., T. Engine Performance and Exhaust Characteristics of Direct-Injection Diesel Operated with DME SAE No. 972973 1997
- Lee C. S. Park S. W. Kwon S.I. An experimental study on the atomization and combustion characteristics of biodiesel blended fuels Energy & Fuels 19 2201 2208 2006
- Yoshimoto Y. Tamaki H Reduction of NOx and Smoke Emission in a Diesel engine Fueled by Biodiesel Emulion Combined wint EGR SAE No. 2001-01-0649 2001
- Alam, M. Song, J. Acharya, R. Boehman, A. Miler, K. Combustion and emission performance of low sulfur, ultra low sulfur and biodiesel blends in a DI diesel engines SAE Tech. No. 2004-01-3024 2004
- Chapman Elana M. Boehman Andre Wain Kimberly Lloyd Wallis Perez Joseph M. Stiver Donald Conway Joseph Impact of DME-Diesel Fuel Blend Properties on Diesel Fuel Injection System DOE Award No. DE-FC26-01NT41115 2003
- Arai, M. et al Disintegrating Process on Spray Characterization of Fuel Jet Injected by a Diesel Nozzle SAE Trans. 93 Paper 840275 1984
- Dan, T. Yamamoto, T. Senda, J. Fujimoto, H. Effect of nozzle configurations for characteristics of non-reacting diesel fuel spray SAE, No. 970355 1997
- Chang, C. T. Fawell, P. V. “A Study on the Effect of Fuel Viscosity and Nozzle on High injection Pressure Diesel Spray Characteristics” SAE, No. 970353 1997