This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Worst Case Scenarios Generation and Its Application on Driving
Technical Paper
2007-01-3585
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situations including the worst cases such as rollover, spin-out and so on. Although the known NHTSA J-turn and Fish-hook steering maneuvers are applied for the vehicle performance assessment, they are not enough to predict other possible worst case scenarios. Therefore, it is crucial to search for the various worst cases including the existing severe steering maneuvers. This paper includes the procedure to search for other useful worst case based upon the existing worst case scenarios in terms of rollover and its application in simulation basis. The human steering angle is selected as a design variable and optimized to maximize the index function to be expressed in terms of vehicle roll angle. The obtained scenarios were enough to generate the worse cases than NHTSA ones. Additionally, as an application, the worst case steering maneuver is acquired for the vehicle to operate with a simple ICC(Integrated Chassis Control) system. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for vehicle system both with an intelligent safety control system and without it.
Recommended Content
Authors
- Daeyi Jung - Body and Chassis Engineering Center, Korea Automotive Technology Institute
- Dohyun Jung - Body and Chassis Engineering Center, Korea Automotive Technology Institute
- Changhyun Jeong - Body and Chassis Engineering Center, Korea Automotive Technology Institute
- Youseok Kou - University of Michigan
- Huei Peng - University of Michigan
Citation
Jung, D., Jung, D., Jeong, C., Kou, Y. et al., "Worst Case Scenarios Generation and Its Application on Driving," SAE Technical Paper 2007-01-3585, 2007, https://doi.org/10.4271/2007-01-3585.Also In
References
- Ma W. Peng H. “A Worst-Case Evaluation Method for Dynamic Systems,” ASME J. of Dynamic Systems, Measurement and Control 121 2 June 1999
- Ungoren A. Y. Peng H. “Evaluation of Vehicle Dynamic Control for Rollover Prevention,” International Journal of Automotive Technology 5 2 June 2004
- Guenther, D.A. Heydinger, G.J “Vehicle dynamics modeling for the National Advanced Driving Simulator of a 1997 Jeep Cherokee” SAE Paper No. 1999-01-0121
- Wielenga, T. J “A method for reducing on-road rollovers - Anti-rollover braking” SAE Congress, SAE Paper No. 1999-01-0123 1999
- Athans, M. Falb, P.L. “Optimal control” McGraw-Hill New York 1966
- Arora Jasbir S. “Introduction to Optimum Design” McGraw-Hill
- Papalambros Panos Y. Wilde Douglass J. “Principle of Optimal design” modeling and computation
- Agrawal, S.K. Fabien, B.C “Optimizaiton of dynamic systems” Kluwer Academic Publishers Netherlands 1999
- Sage, A.P. White, C.C. “Optimum systems control” Prentice-Hall 1997
- peng Huei Kou Youseok 2 nd annual report Korea Automotive Technology Institute 2006
- Carsim software http://www.carsim.com
- Matlab/simulink software http://www.mathwork.com