This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Heat Exchange Efficiency Characteristics of EGR Cooler with Stack-Type or Shell &Tube-Type
ISSN: 0148-7191, e-ISSN: 2688-3627
Published August 05, 2007 by SAE International in United States
Annotation ability available
The use of Exhaust Gas Recirculation (EGR) system has become a popular way for reducing NOx levels in internal combustion engine. Reducing NOx and PM emissions from diesel engine, and improving fuel consumption simultaneously are important in meeting government regulations and society needs. Recently, an important goal in diesel engine research is the development of means to reduce the emissions of NOx and PM. Cooled EGR system is one of the most effective techniques currently available for reducing NOx and PM emission in internal combustion. In particular, EGR system has the trade-off relation between NOx and PM emission, especially at high loads. In the present study, engine dynamometer experiments have been carried on the characteristics which improve heat exchange effectiveness of EGR cooler with shell & tube-type and stack-type. The heat exchange effectiveness has been experimentally examined with shell & tube-type and stack-type of EGR cooler and compared the performance characteristics of two types.
CitationPark, S., Choi, K., Wang, H., Kim, H. et al., "Heat Exchange Efficiency Characteristics of EGR Cooler with Stack-Type or Shell &Tube-Type," SAE Technical Paper 2007-01-3446, 2007, https://doi.org/10.4271/2007-01-3446.
- Walsh, M.P. “Global trends in diesel emissions control” 1997 SAE, 970179 1997
- Wade, W.R. “Light-Duty Diesel NOx-HC-Particulate Trade-Off Studies” SAE paper 800335 1980
- Kakoi Youitsu Tsutsui Yasuhiro Ono Noriaki Umezawa Katsunori Kondo Nobuhiro “Emission Reduction Technologies Applied to High- Speed Direct Injection Diesel Engine” SAE paper 980173 1998
- Park Wooyoung Choi Sungwoo chung sungsik Ha jongyul “A Study on Exhaust Characteristics in HIDI diesel engine applied EGR Cooler” KSAE 2003 Fall conference collected papers 393 397 2003
- McKinley, Thomas L. “Modeling Sulfuric Acid Condensation in Diesel Engine EGR Coolers” SAE paper 970636 1997
- Lim Jongwan Kang Byungmu Park Jongsang Yeom Jeongkuk Chung Sungsik Ha Jongyul “A Study on the effects of EGR Temperature on emission characteristics in a HSDI diesel engine using EGR Cooler” KSAE 2004Fall conference collected papers 306 312 2004
- Leet JA Simescu S Froelund K Dodge LG Roberts CE Emission solution for 2007 and 2010 heavy-duty diesel engines 2004 SAE 2004-01-0124
- He BQ Shuai SJ Wang JX He H The effect of ethanol blended diesel fuels on emissions from a diesel engine Atoms Environ 2003 37 4965 71
- Wendland Daniel W. “Automobile Exhaust-System Steady-Sate Heat Transfer” VTMS 1 1993 Columbus paper number 931085
- Malchow G.L. Sorenson S.C. Buckus R.O. “Heat Transfer in the Straight Section of an Exhaust Port of a Spark Ignition Engine” SAE paper number 790309
- Simens VDO Worldwide Emission Standards and Related Regulations Siemens VDO April 2003
- Kimura, S. Aoki, O. Ogawa, H. Muranaka, S. Enomoto, Y. New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engine SAE Paper 1999-01-3681 SAE Transaction - Journal of Engine 108 1999
- Wang CC Webb R L. “Data Reduction for Air-side Performance of Fin-and-Tube Heat Exchangers.” 2000 Experimental Thermo Fluid Science 218 226