This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Modelling of a High-Pressure Type 2 Cylinder for Storing Natural Gás for Vehicles
Technical Paper
2007-01-2936
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
ISO 11439 standards consider 4 types of high-pressure cylinders to storing natural gas for vehicles applications. Among them the type 2, metal-lined hoop wrapped cylinder, is the aim of this work.
It describes a numerical model built using ANSYS application to determine stress on the metal liner and on composite material applied on the liner by filament winding process. Using design criterion for laminate composites, the total thickness of the composite layer has been evaluated to get an optimized value. Employing the element shell multilayer of ANSYS 8.1 and a model of the type 2 cylinder, the stress state in the metal liner and in each layer of the composite has been studied.
Authors
- Giselle Barbosa de Mattos - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Luiz Carlos Rolim Lopes - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Anaisa de Paula Guedes Villani - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Thiago de Carvalho Silva - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Jayme Pereira de Gouvêa - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Luciano Pessanha Moreira - Universidade Federal Fluminense - Escola de Engenharia industrial Metalúrgica de Volta Redonda - Pós-Graduação em Engenharia Metalúrgica
- Adriano de Senne - CILBRÁS - Cilindros S.A.
Citation
de Mattos, G., Lopes, L., de Paula Guedes Villani, A., de Carvalho Silva, T. et al., "Numerical Modelling of a High-Pressure Type 2 Cylinder for Storing Natural Gás for Vehicles," SAE Technical Paper 2007-01-2936, 2007, https://doi.org/10.4271/2007-01-2936.Also In
References
- ISO 11439 “High Pressure Cylinders for the onboard storage of natural gas as a fuel for automotive vehicles”
- WEBSTER, C. “Taking new approaches in standards development for products for new market - The development of ISO 11439 for compressed natural gas vehicle cylinders” ISO Bulletin 71 2001
- MATTOS, G.B. 2006
- AL-KHALIL, M.F.S. SODEN, P.D. “Theoretical through-thickness elastic constants for filament-wound tubes” International Journal of Mechanical Science 36 o 1 49 62 1994
- DANIEL, I.M. ISHAI, O. “Engineering Mechanics of Composite Materials” Oxford University Press 2006 373 383
- GAY, D. HOA, S. V. TSAI, S.W. “Composite Materials - Design and Applications” Londres, CRC Press 2003 531
- AMORIM, G.B. 2005 6 10