This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formulation Impacts on Sequence IIIG Viscosity Increase
Technical Paper
2007-01-1961
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A range of tools including analytical, bench, and engine tests have been used to investigate the viscosity increase mechanism and formulation appetite of the Sequence IIIG engine test. As commonly observed with high temperature tests, the Sequence IIIG has a strong appetite for antioxidants. Base oil also has a strong impact. Base oil volatility has a direct physical impact on viscosity due to the evaporation of light base oil components and the resultant increase of non-volatile additive components. Volatility characteristics are dependent on the distribution of volatile fractions. The relative oxidation and volatility contributions to viscosity increase have been compared between the Sequence IIIG and Sequence IIIF. The impact of base oil volatility is greater in the Sequence IIIG than the Sequence IIIF test.
Recommended Content
Technical Paper | Characterization of TEOST Deposits and Comparison to Deposits Formed on Sequence IIIG Pistons |
Technical Paper | Durability of Dual Clutch Transmission Fluids |
Technical Paper | Maintenance Management-Key in the Mining Production Strategy |
Citation
Boffa, A. and Hirano, S., "Formulation Impacts on Sequence IIIG Viscosity Increase," SAE Technical Paper 2007-01-1961, 2007, https://doi.org/10.4271/2007-01-1961.Also In
References
- Colclough T. “Role of Additives and Transition Metals in Lubricating Oil Oxidation” Ind. Eng. Chem. Res. 1987 26 1888 1895
- Korcek S. Johnson M.D. Jensen R.K. Zinbo M. “Determination of the High-Temperature Antioxidant Capability of Lubricants and Lubricant Components” Ind. Eng. Chem. Res. 1986 25 621 627
- Naldu S.K. Klaus E.E. Dube J.L. “Kinetic Model for High-Temperature Oxidation of Lubricants” Ind. Eng. Chem. Res. 1986 25 598 603
- Yasutomi S. Maeda Y. Maeda T. “Kinetic Approach to Engine Oil. 2. Antioxidant Decay of Lubricant System” Ind. Eng. Chem. Res. 1981 20 536 540
- Mahoney L.R. Otto K. Korcek S. Johnson M.D. “The Effect of Fuel Combustion Products on Antioxidant Consumption in a Synthetic Oil” Ind. Eng. Chem. Res. 1980 19 11 15
- Moritani H. Nozawa Y. “Investigation on Oil Degradation in Piston Second-Land Region of Gasoline Engine” Japanese Journal of Tribology 1999 44 4 435 446
- Blaine S. Savage P.E. “Reaction Pathways in Lubricant Degradation. 2. n-Hexadecane Autoxidation” Ind. Eng. Chem. Res. 1991 20 2185 2191
- Maleville X. Faure D. Legros A. Hipeaux J.C. “Oxidation of Mineral Base Oils of Petroleum Origin: The Relationship between Chemical Composition, Thickening, and Composition of Degradation Products” Lubrication Science 1996 9 1 59
- Johnson M.D. Korcek S. Zinbo M. “High-Temperature Antioxidant Capabilities of Base Oils and Base Oil-Additive Mixtures” Ind. Eng. Chem. Res. 1987 26 1754 1757
- Roby S.H. Supp J.A Barrer D.E. Hogue C.H. “Base Oil Effects in Sequence IIID and Sequence VD Engine Tests” SAE 892108
- Clark S.L. Olree R.M. Lang P. Leverett C. Bowden D.H. “Development of the Sequence IIIG Engine Oil Certification Test” SAE 2004-01-2987
- Yilmaz E. Tian T. Wong V.W. Heywood J.B. “An Experimental and Theoretical Study of the Contribution of Oil Evaporation to Oil Consumption” SAE 2002-01-2684
- Choi E. Deane B.C. “Basestock Volatility and Oil Consumption” NPRA AM-98-47