This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Novel base metal-palladium catalytic diesel filter coating with NO2 reducing properties
Technical Paper
2007-01-1921
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A novel base metal-palladium catalytic coating was applied on commercial silicon carbide wall flow diesel filters and tested in an engine test bench. This catalytic coating limits the NO2 formation and even removes NO2 within a wide temperature range. Soot combustion, HC conversion and CO conversion properties are comparable to current platinum-based coatings, but at a lower cost. This paper compares the results from engine bench tests of present commercial solutions as regards NO2-, HC-, CO-removal and soot combustion with the novel coating. Furthermore, emission test results from base metal-palladium coated diesel particulate filters installed on operating taxis and related test cycle data are presented. A significant reduction in NO2 emission compared to present technology is measured.
Recommended Content
Authors
Topic
Citation
Johansen, K., Dahl, S., Mogensen, G., Pehrson, S. et al., "Novel base metal-palladium catalytic diesel filter coating with NO2 reducing properties," SAE Technical Paper 2007-01-1921, 2007, https://doi.org/10.4271/2007-01-1921.Also In
References
- Allansson, Ronny et al. “Optimising the Low Temperature Performance and Regeneration Efficiency of the Continuously Regenerating Diesel Particulate Filter (CR-DPF) System” SAE 2002-01-0428
- Lemaire, J. “A New Challenge for Diesel Catalysts and Catalytic Soot Filters: Zero Production of NO 2 ” CAPOC 7 2006 1 1
- 0268-7305 2006
- An, H. McGinn, P.J. “Catalytic behaviour of potassium containing compounds for diesel soot combustion” Applied Catalysis B: Environmental 62 2006 9 46 56
- Dorenkamp, R. 3 2005 15
- Vogt, C.D. et al. “Efficient Material Design for Diesel Particulate Filters” CAPOC 7 2006 2 81
- Punke, A. et al. “Catalyzed Soot Filters in Close Coupled Position for Passenger Vehicles” SAE 2006-01-1091
- Pfeifer, M. et al. “The second Generation of Catalyzed Diesel Particulate Filter Systems for Passenger Cars” SAE 2005-01-1756
- Hong, S.J. et al. “Catalyzed Diesel Particulate Filters for Passenger Car Applications - Development Concepts for the Present and the future” SAE 2005-26-023