This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical simulation on multi-injection nozzle applied to Ignition Chamber GDI engine
Technical Paper
2007-01-1910
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Operating with a single, fixed ignition location imposes very stringent requirements on the mixture preparation process in GDI engines, because it is very difficult to provide a combustible mixture at the spark gap when spark plug discharges over the entire engine operating range [1]. A new GDI combustion system called Ignition Chamber Gasoline Direct-Injection combustion system is developed to solve this problem. In this combustion system, a multi-injection nozzle that provides a constant volume spray plume from a nozzle hole is adopted to maintain the constant air/fuel ratio in the ignition chamber.
Numerical simulations of the multi-injection process were carried out, and the spray patterns formed by the constant nozzle hole and the major nozzle holes with various effective plunger strokes were calculated. Based on the simulation results, the parameters that impact the performance of the multi-injection nozzle were analyzed and appropriate nozzle dimensions for the Ignition Chamber GDI engine were determined. The 1-D results showed that using multi-injection nozzle can maintain the constant nozzle hole delivery volume at various fuel delivery volumes per cycle per cylinder and meets the requirement of the Ignition Chamber GDI engine combustion system, and 3-D simulation results showed that leakage from constant nozzle hole is at an acceptable level.
Authors
- Jiang-ping Tian - Dalian University of Technology, China
- Wu-qiang Long - Dalian University of Technology, China
- Lei Fu - Dalian University of Technology, China
- Bao-guo Du - Dalian University of Technology, China
- Xian-yin Leng - Dalian University of Technology, China
- Xin Su - Dalian University of Technology, China
Citation
Tian, J., Long, W., Fu, L., Du, B. et al., "Numerical simulation on multi-injection nozzle applied to Ignition Chamber GDI engine," SAE Technical Paper 2007-01-1910, 2007, https://doi.org/10.4271/2007-01-1910.Also In
References
- Zhao F. Lai M. C. Harrington D. L. Automotive spark-ignition gasoline engines[C] Process in Energy and Combustion Science 25 1999 437 562
- Tian Jiang-ping Long Wu-qiang Du Wei etc. Research on Lean-burn Combustion of Ignition Chamber Engine[C] 2005 annual meeting of Chinese Society of Internal Combustion Engine & APC2005 combined annual meeting Wuhan 2005 81 85
- Chu Lun-kong Diesel fuel delivery and atomization [M] Dalian Dalian University of Technology Press 1988 46 62
- Heywood John B. Internal Combustion Engine Fundamentals [M] New York McGraw-Hill 1988 427 437
- AVL HYDSIM Reference Manual [M] Austria 2004