This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fatigue Behaviour of Friction Stir Joined Aluminium Alloy NG5754 and AA6111 Sheets
Technical Paper
2007-01-1704
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A study examining the fatigue behaviour of spot friction stir joined (SFJ) aluminium NG5754 and AA6111 sheets was carried out. Different friction stir holding times were applied to the NG5754 alloy, whilst paint bake cycles were applied to the AA6111 joints in order to examine the effects of these variables on the fatigue behaviour of the joints. Static and fatigue tests were performed on all samples and the results were compared. It was demonstrated that the material flow characteristics were affected by the holding time leading to different joint attributes, which in turn contributed to different fatigue behaviour. Paint bake cycle affected the fatigue life, particularly at low applied loads.
Recommended Content
Technical Paper | Spot Friction Welding of Aluminum to Steel |
Technical Paper | Static and Fatigue Strength Evaluation of Clinched Joints in an Aluminum Alloy |
Technical Paper | A J-Integral Approach to Fatigue Resistance of a Tensile-Shear Spot Weld |
Authors
Citation
Han, L., Blundell, N., Lu, Z., Shergold, M. et al., "Fatigue Behaviour of Friction Stir Joined Aluminium Alloy NG5754 and AA6111 Sheets," SAE Technical Paper 2007-01-1704, 2007, https://doi.org/10.4271/2007-01-1704.Also In
References
- Han L. Chen Y. K. Chrysanthou A. O'Sullivan J. M. “Self-pierce riveting - a new way for joining structures” 2002 446 2 123 127
- Pan T. Joaquin A. Wilkosz D. E. Reatherford L. Nicholson J. M. 2004 Spot Friction Welding for Sheet Aluminum Joining Proceedings of the 5 th International Symposium of Friction Stir Welding Metz, France Sep 14 16 2004
- Kallee S. W. Nicholas E. D. “Application of friction stir welding to lightweight vehicles” SEA Technical Paper, 982362 1998
- Waldron D. J. Roberts R. W. Dawes C. J. Tubby P. J. “Friction stir welding-A revolutionary new joining method” SAE Technical Paper, 982149 1998
- Sakano R Murakami K Yamashita K Hoye T Fujimoto M Inuzuka M Nagao Y Kashiki H “Development of Spot FSW Robot System for Automobile Body Members” Proceedings of the 3rd International Symposium of Friction Stir Welding Kobe 2001
- Lin P.-C. Pan J. Pan T. “Fracture and Fatigue Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum Alloy 6111-T4 Sheets” SAE Technical Paper No. 2005-01-1247
- Lin P.-C. Pan J. Pan T. “Fatigue Failures of Spot Friction Welds in Aluminum 6111-T4 Sheets Under Cyclic Loading Conditions” SAE Technical Paper, 2006-01-1207
- Freeney T. A. Sharma S. R. Mishra R. S. “Effect of welding parameters on properties of 5052 aluminum friction stir spot welds” SAE Technical Paper, 2006-01-0969
- Blundell N. Han L. Young K. W. Hewitt R. “The influence of Paint Bake Cycles on the Mechanical Properties of Spot Friction Joined Aluminium Alloys” SAE Technical paper, 2006-01-0967