This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Spray Guided DISI Using Side Mounted Multi-Hole Injector
Technical Paper
2007-01-1413
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Concept of the spray guided direct Injection spark ignition (DISI) was studied to improve the performance of wall-guided DISI. Focusing the effect of multi-hole injector location either centrally-mounted or side-mounted, mixture distribution and ignitability was studied. Computational Fluid Dynamics (CFD) modeling was applied to investigate the history of mixture, ignitable mixture existence around the spark plug in light load condition and homogeneity in full load condition. CFD results showed that side-mounted injection has an advantage over centrally-mounted injection in terms of mixture stability around the spark plug, although the slight disadvantage in homogeneity in full load condition.
Side-mounted injection was selected because of robust ignitability potential and further experimental investigation was conducted. Stable combustion window against injection and ignition timing was investigated in experimentally. Fuel economy and emissions for a stratified mixture and full load performance were also confirmed by dynamometer evaluation.
Recommended Content
Authors
Citation
Yamashita, H., Seto, M., Ota, N., Murakami, Y. et al., "Spray Guided DISI Using Side Mounted Multi-Hole Injector," SAE Technical Paper 2007-01-1413, 2007, https://doi.org/10.4271/2007-01-1413.Also In
References
- Ortmann R. Et al. Methods and Analysis of Fuel Injection, Mixture Preparation and Charge Stratification in Different Direct Injected SI Engines Proceedings of SAE, 2001-01-0970 , pp. 1 7 2001
- Koike O Present and Future Direct Injection Gasoline Engines (in Japanese with English summary) Engine Technology 4 4 14 20 2002
- Suzuki M. Et al. Simultaneous Concentration Measurement of Vapor and Liquid in an Evaporating Diesel Spray Proceeding of SAE, No 930863 , pp 1 23 1993
- Kanzaki J. Et al. Spray and Mixture Characteristics of Hole Nozzle for D.I Gasoline Engine (in Japanese with English summary) The 13th Symposium (ILASS-Japan) on Atomization 233 238 2004
- Yamakawa M. Et al. Quantitative Measurement of Liquid and Vapor Phase Concentration Distributions in a D.I. Gasoline Spray by the Laser Absorption Scattering (LAS) Technique SAE Trans. J. Engine 111 3 2002 2194 2206
- Aoki O. Et al. An evaluation method for quality of air-fuel mixture distribution and movement in combustion chamber of DISI engine using CFD JSAE Review Vol 24 25 31 2003
- Kuwahara K. Et al. Influence of flow field structure after the distortion of tumble on lean-burn flame structure International Symposium COMODIA 94
- Mutsumi K. Et al. Application of a New Combustion Concept to Direct Injection Gasoline Engine Proceedings of SAE, 2000-01-0531 1 8 2000
- Han Zhiyu Et al. Development of a New Light Stratified-Charge DISI Combustion System for a Family of Engines With Upfront CFD Coupling With Thermal and Optical Engine Experiments Proceedings of SAE, 2004-01-0545 1 25 2004
- VanDerWege Brand A. Et al. Development and Analysis of a Spray-Guided DISI Combustion System Concept Proceedings of SAE, 2003-01-3105 1 19 2003