This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design Guidelines for Components Die Cast in Creep-Resistant Magnesium Alloys MRI153M and MRI230D
Technical Paper
2007-01-1034
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Magnesium high pressure die casting alloys MRI 153M and MRI 230D offer attractive properties at elevated temperatures up to 150°C and 190°C, respectively. The presence of specific alloying elements results in different physical and metallurgical properties of new alloys as well as their solidification characteristics during the HPDC process, compared to AZ91D alloy. Hence, process parameters, such as melt and die temperature and injection profile, should be optimized. Furthermore, principles for proper die design, such as gate thickness and runners system, should be considered and addressed.
This paper presents design and process guidelines, in order to optimize the HPDC process of the above alloys and produce high performance components.
Recommended Content
Authors
Topic
Citation
Moscovitch, N., Gertsberg, G., Nagar, N., Yehuda, R. et al., "Design Guidelines for Components Die Cast in Creep-Resistant Magnesium Alloys MRI153M and MRI230D," SAE Technical Paper 2007-01-1034, 2007, https://doi.org/10.4271/2007-01-1034.Also In
References
- Schumann S. “Future Use of Magnesium in Cars - Potential and Prerequisite” 12th Magnesium Automotive and User Seminar, Aalen 13 14 September 2004
- Bronfin B. et al EP Patent1, 308, 530 May 11 2006
- Bronfin B. et al EP Patent 1, 308, 531 April 26 2006
- Bronfin B. et al “Development of Magnesium Alloys for Advanced Applications” Magnesium alloys and their applications” 2003 55 61
- Moscovitch N. et al “The Effect of Porosity on the Microstructure and Mechanical Properties of Die Cast Mg Alloys” SAE paper 2006-01-0524
- Moscovitch N. et al. “The Effect of High Pressure Die Casting Process Characteristics on The Properties and Performance of Advanced Mg Alloys” 357 363 2005
- Moscovitch N. et al. ” The effect of HPDC process parameters on the performance of high creep resistant alloys MRI153M & MRI 230D” Aalen seminar 2006 39 49
- “Die casting” Metals Handbook 10th 1995 1z5 286 295
- The Essentials of Magnesium Die Casting, International Magnesium Association 1991 10
- Avedisian M. Baker H. Magnesium and Magnesium Alloys ASM Specialty Handbook 1999
- Gertsberg G. et al. ”Effect of HPDC Parameters on the Performance of Creep Resistant Alloys MRI153M and MRI230D” SAE paper 2005-01-0334 Detroit, MI 2005