This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Uniaxial Tension and Cyclic Deformation Behavior of Steel/Zinc Laminated Composites
Technical Paper
2007-01-0996
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Uniaxial tension and cyclic deformation tests of Steel /Zinc laminated composites made by casting were investigated under different conditions. The results indicate that the zinc/steel composite has increased plasticity and decreased strength when compared to steel alone. The strain rate has nearly no influence on the stress-strain graph for the specimens of composites under tension. The stress levels at ±0.5%, ±1%, ±1.5% strain range under tension and compression increase with the increasing number of cycles suggesting a cyclic hardening behavior of the material has taken place, which is gradually obvious with increasing cyclic strain. The stress under tension and compression tended to stabilize with further cycling.
Authors
Citation
Ran, X., Bao, X., Wu, P., and Cao, Z., "Uniaxial Tension and Cyclic Deformation Behavior of Steel/Zinc Laminated Composites," SAE Technical Paper 2007-01-0996, 2007, https://doi.org/10.4271/2007-01-0996.Also In
References
- Schaller R. Metal matrix composites, a smart choice for high damping materials[J] Journal of Alloys and Compounds 2003 355 131 135
- Ritchie Iain G Pan Z L. Characterization of the damping properties of high-damping alloys[J] ASTM Special Technical Publication 1992 1169 142 157
- Yang L S. Design and preparation of Zn-based materials possessing both high damping and good mechanical properties [J] Transactions of Nonferrous Metals Society of China 2001 11 3 421 424
- Tsuttornu Tanaka Koichi Makii Atsurnichi Kushide, et al. Capability of superplastic forming in the seismic device using Zn-22Al eutectoid alloy [J] Script Material 2003 49 5 361 366
- Goodwin Frank E. Progress on developing an improved creep resistant zinc alloy [J] Die Casting Engineer 2000 44 4 32 35
- Yoshida Fusahito A constitutive model of cyclic plasticity[J] International Journal of Plasticity 2000 16 359 380
- Liu Yong Xie Zeliang Van Humbeeck Jan Cyclic deformation of NiTi shape memory alloys [J] Materials Science and Engineering A 1999 273-275 673 678
- Liu Yong Xie Zeliang Van Humbeeck Jan Asymmetry of stress-strain curves under tension and compression for NiTi shape memory alloys[J] Acta mater 1998 46 12 4325 4338
- Llotca J. Poza P. Influence of reinforcement fracture on the cyclic stress-strain curve of metal matrix composites [J] Acta metall. Mater 1995 43 11 3959 3969
- Mulyukov R.R. Pshenichnyuk A.I. Structure and damping of nanocrystalline metals and alloys prepared by high plastic deformation techniques[J] Journal of Alloys and Compounds 2000 355 26 30