This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Prestrain Effect on Fatigue of DP600 Sheet Steel
Technical Paper
2007-01-0995
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The component being formed experiences some type of prestrain that may have an effect on its fatigue strength. This study investigated the forming effects on material fatigue strength of dual phase sheet steel (DP600) subjected to various uniaxial prestrains. In the as-received condition, DP600 specimens were tested for tensile properties to determine the prestraining level based on the uniform elongation corresponding to the maximum strength of DP600 on the stress-strain curve. Three different levels of prestrain at 90%, 70% and 50% of the uniform elongation were applied to uniaxial prestrain specimens for tensile tests and fatigue tests. Fatigue tests were conducted with strain controlled to obtain fatigue properties and compare them with the as-received DP600. The fatigue test results were presented with strain amplitude and Neuber's factor.
Recommended Content
Technical Paper | “Fatigue Behavior of Sheet Steels for Automotive Industry” |
Technical Paper | Fatigue Properties of Sheet Steel Before and After Galvanizing |
Technical Paper | Adapting Material Data to Design |
Authors
Topic
Citation
Le, Q., Kang, H., Khosrovaneh, A., Sa, C. et al., "Prestrain Effect on Fatigue of DP600 Sheet Steel," SAE Technical Paper 2007-01-0995, 2007, https://doi.org/10.4271/2007-01-0995.Also In
References
- Chen G. Liu S. Knoerr L. Sato K. Liu J. “Residual Forming Effects on Full Vehicle Frontal Impact and Body-in-White Durability Analyses,” SAE Paper No. 2002-01-0640 2002
- Cornette D. Galtier A. “Influence of the Forming Process on Crash and Fatigue Performance of High Strength Steels for Automotive Components” SAE Paper No. 2002-01-0642 2002
- Fredriksson K. Melander A. Hedman M. “Influence of prestraining and ageing on fatigue properties of high-strength sheet steels” International Journal of Fatigue 10 3 1988 139 151
- Garcia C. Hua M. DeArdo A. Piehler H. “Forming Strain Path and Cold Work Embrittlement in Sheet Steels” SAE Paper No. 2002-01-0043 2002
- Rupp A. Wallmichrath M. Reip C. “Durability Evaluation of Formed Mild and High Strength Steel Structures Sheet” SAE Paper No. 2002-01-0578 2002
- Yan B. Belanger P. Citrin K. “Effect of Forming Strain on Fatigue Performance of a Mild Automotive Steel” SAE Paper No. 2001-01-0083 2001
- Lee Y. Pan J. Hathaway R. Barkey M. “Fatigue Testing and Analysis” Elsevier Butterworth-Heinemann 2005 181 182
- Khosrovaneh A. Pattu R. Schnaidt W. “Discussion of Fatigue Analysis Techniques in Automotive Applications,” SAE Paper No. 2004-01-0626 2004
- Doucet A. Lee D. “Transient Tensile Behavior of Interstitial Free Steel and 70/30 Brass Following Plane-Strain Deformation,” Met. Trans. 20A 1989 1483 93