This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Integration of Kinematics and Compliance Measurement with Vehicle Dynamics Validation for a Shared Platform
Technical Paper
2007-01-0832
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper highlighted the up-to-date major efforts and progress on chassis development for a shared platform project. The project history was described briefly. We determined the proper vehicle and chassis specifications according to the intensive benchmarking from literature review, statistics study of the available automotive database, and benchmarking tests. An introduction of our in-house designed kinematics and compliance (K&C) rig and the discussion of the associated K&C test results were offered. We addressed a steady-state constant radius driving behavior simulation as an illustration of our work on virtual validation. Finally the results of dynamic handling validation tests of prototype vehicle were discussed.
Recommended Content
Authors
Citation
Jen, M. and Lu, M., "Integration of Kinematics and Compliance Measurement with Vehicle Dynamics Validation for a Shared Platform," SAE Technical Paper 2007-01-0832, 2007, https://doi.org/10.4271/2007-01-0832.Also In
SAE 2007 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V116-6; Published: 2008-08-15
Number: V116-6; Published: 2008-08-15
References
- Yamaguchi Jack “From Mocos to Majestas,” automotive engineering international 112 11 SAE International 81 87 Nov. 2004
- Chassis & Suspension Component Design for Passenger Cars & Light Trucks, SAE course I.D. # 95025 2004
- Vehicle Dynamics for Passenger Cars & Light Trucks, SAE course I.D. # 99020 2004
- Riede Peter M., Jr. Leffert Ronald L. Cobb William A. “Typical Vehicle Parameters for Dynamics Studies Revised for the 1980s,” SAE Paper 840561
- Barak Pinhas “Magic Numbers in Design of Suspensions for Passenger Cars,” SAE Paper 911921
- Milliken William F. Milliken Douglas L. Chassis Design - Principles and Analysis Society of Automotive Engineers, Inc. Warrendale, PA, USA 2002
- Gillespie Tomas D. Fundamentals of Vehicle Dynamics Society of Automotive Engineers, Inc. Warrendale, PA, USA 1992
- Alexander David “Mechanical Advantage,” automotive engineering international 112 7 SAE International 38 44 July 2004
- Birch Stuart “Chassis Evolution,” automotive engineering international 113 6 SAE International 40 42 June 2005
- Cowan Brian “More Than a Feeling,” Vehicle Dynamics International 30 32 April/May 2006
- Passenger Cars - Steady-state circular driving behaviour - Open-loop test methods 2004 International Organization for Standardization Geneva, Switzerland 2004
- Road vehicles - Lateral transient response test methods - Open-loop test methods 2003 International Organization for Standardization Geneva, Switzerland 2003
- Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test 2003 International Organization for Standardization Geneva, Switzerland 2003
- Passenger Cars - Test track for a severe lane-change manoeuvre - Part 1: Double lane-change 1999 International Organization for Standardization Geneva, Switzerland 1999
- Morse Phil “Testing Kinematics and Compliance,” automotive engineering international 113 12 SAE International 50 51 Dec. 2005
- Best Tony et al. “Design and Operation of a New Vehicle Suspension Kinematics and Compliance Facility,” SAE Paper 970096
- Morse Phillip “Using K&C Measurements for Practical Suspension Tuning and Development,” SAE Paper 2004-01-3547
- Heitzman Edward J. Heitzman Edward F. “Topsy - A Modular Chassis Parameter Measurement System,” SAE Paper 971056
- Holdmann Peter et al “Suspension Kinematics and Compliance - Measuring and Simulation,” SAE Paper 980897
- http://www.nhtsa.dot.gov
- Uys P. E. Els P.S. Thoresson M.J. “Criteria for Handling Measurement,” Journal of Terramechanics 43 43 67 2006
- Passenger cars - Braking in a turn - Open-loop test method 2006 International Organization for Standardization Geneva, Switzerland 2006
- Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method 2002 International Organization for Standardization Geneva, Switzerland 2002
- Passenger cars - Free-steer behaviour - Part 1: Steering-pulse open-loop test method 2004 International Organization for Standardization Geneva, Switzerland 2004