This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling Needle Motion Influence on Nozzle Flow in High Pressure Injection System
Technical Paper
2007-01-0250
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper deals with the numerical investigation of a Diesel engine high pressure DI system in which the influence of needle motion characteristics on the internal injector flows is evaluated; a radial perturbation of the axial needle motion has been imposed to analyze its role over the nozzle flow features. The developed model is based on the coupling of two computational tools. With the former one, AMESim code, the injector has been modeled; the results obtained from the injector simulation, in terms of injection needle lift time evolution, have been used to initialize the latter computation tool, FIRE code, in which 3D flow numerical investigation of the internal injector flows has been performed. Details of the adopted modeling strategy are presented and the results of each simulation step are shown.
Recommended Content
Topic
Citation
Chiavola, O. and Palmieri, F., "Modeling Needle Motion Influence on Nozzle Flow in High Pressure Injection System," SAE Technical Paper 2007-01-0250, 2007, https://doi.org/10.4271/2007-01-0250.Also In
References
- Catania, A. Ferrari, A. Spessa, E. “Numerical-Experimental Study and Solutions to Reduce the Dwell Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type C.R. System” ICES2006 ASME Paper No. 1369
- Batatta, M. Catania, A. Ferrari, A. “Hydraulic Circuit Design Keys to Remove the Dependence of the Injected Fuel Amount on Dwell Time in Multi-Jet C.R. Systems” ICES2006 ASME Paper No. 1426
- Fimml, W. Fuchs, C. Jank, T. Wimmer, A. “Optical Analysis and Simulation of Diesel Sprays in a High Pressure and High Temperature Spray Box” ICES2006 ASME Paper No. 1376
- Ueki, H. Ishida, M. Sakaguchi, D. “Investigation of Droplet Disintegration in Diesel Spray Core by Advanced Laser 2-Focus Velocimeter” SAE Paper No. 2005-01-1238
- Tatschl, R. v.Kuensberg Sarre, E. v.Berg, E. “IC-Engine Spray Modeling - Status and Outlook” Int. Multidimensional Engine Modeling User's Group Meeting at SAE W. Congress 2002
- Morgan, R. Wray, J. Kennaird, D.A. Crua, C. Heikal, M. R. “The Influence of Injector Parameters on the Formation and Break-up of a Diesel Spray” SAE Paper No. 2001-01-0529
- Tatschl, R. v. Künsberg-Sarre, C. Alajbegovic, A. Winklhofer, E. “Diesel Spray Modeling Including Multidimensional Cavitation Nozzle Flow Effects” Proc. of ILASS Europe Conference Sept. 11-13 Darmstadt, Germany 2000
- Roth, H. Gavaises, M. Arcoumanis, C. “Cavitation Initiation, Its Development and Link with Flow Turbulence in Diesel Injector Nozzles” SAE Paper No. 2002-01-0214
- Stiesch, G. “Modeling Engine Sprays and Combustion Processes” Springer Verlag Berlin 2003
- Chiavola, O. Palmieri, F. “Coupling Codes for Nozzle Flow Modeling in Diesel Injection Systems” ICES2006 ASME Paper No. 1414
- Chiavola, O. Palmieri, F. Chiatti, G. “Integrated Modeling of Fuel Influence on Common Rail Injection System Performance” ICEF2006 ASME Paper No. 1556
- Imagine AMESim v4.2 Tutorial and User Guide AMESim Technical Bullettins
- Chiavola, O. Giulianelli, P. “Modeling and Simulation of Common-Rail Systems” SAE Paper No. 2001-01-3183
- Wang, T.C. Han, J.S. Xie, X.B. Lai, M.C. Henein, N.A. Schwarz, E. Bryzik, W. “Parametric Characterization of High-Pressure Diesel Fuel Injection Systems” J. Engineering in Gas Turbine & Power 125 412 426 2003
- FIRE v8.4 Multiphase Manual AVL List GmBH
- FIRE v8.4 CFDWM Guide AVL List GmBH
- Han, J.S. Lu, P.H. Xie, X.B. Lai, M.C. Henein, N.A. “Investigation of Diesel Spray Primary Breakup and Development for Different Nozzle Geometries” SAE Paper No. 2002-01-2775
- Fezzaa, K. Lee, W.K. Cheong, S. Powell, C.F. Wang, J. Li, M. Lai, M.C. “High Pressure Diesel Injection Studied by Time-Resolved X-Ray Phase Contrast Imaging” ICES2006 ASME Paper No. 1409
- Hinze, J.O. “Turbulence” 2nd McGraw-Hill New York 1975
- Franklin, R.E. McMillan, J. “Noise Generation in Cavitating Flows” J. Fluids Eng. 106 336 341 1984