This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mechanism of Shudder Phenomena in Torque Converter and System Simulation Model
Technical Paper
2007-01-0243
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
It has been past over 10 years since the slip-controlled clutch has adopted to torque converters as improvement technology of fuel consumption. In the recent trend, the updated demand is use of expanded slipping control for further improvement of the transmission efficiency. However, there are the cases of vibration issues in slip-controlled torque converter clutches. This issue is called shudder as typical problem of vehicle vibration.
In design of torque converter, it is known as the importance to manage μ -V property preventing from shudder vibration. However, it was difficult to predict μ -V property on the actual system, because of its complex interface phenomena are caused by various changeable factors include physical and chemical. Therefore, if prototype design was never satisfied anti- shudder properties, we need to change design and lost much time to redesign it.
In this paper, we report a new technology of predicting μ -V property on torque converter clutch (TCC) using simulation model and μ-V property with the interface phenomena of the Elasto-hydrodynamic Lubrication (EHL) in TCC system.
Recommended Content
Authors
- Hideki Ogawa - Aisin AW Industries Co., Ltd.
- Eiji Hayashi - Aisin AW Industries Co., Ltd.
- Osamu Yoshida - Aisin AW Industries Co., Ltd.
- Yoichi Hayakawa - Aisin AW Industries Co., Ltd.
- Takamitsu Kuroyanagi - Aisin AW Co., Ltd.
- Kazunori Ishikawa - Aisin AW Co., Ltd.
- Hideaki Takabayashi
- Kenji Maruo
- Tamotsu Fujii
Citation
Ogawa, H., Hayashi, E., Yoshida, O., Hayakawa, Y. et al., "Mechanism of Shudder Phenomena in Torque Converter and System Simulation Model," SAE Technical Paper 2007-01-0243, 2007, https://doi.org/10.4271/2007-01-0243.Also In
References
- Tohyama M. Ohmori T. Sanda S. Ueda F. “Anti-Shudder Mechanism of ATF Additives (Part 1)” Journal of Japanese Society of Tribologists 47 7 2002 565 574
- Tohyama M. Ohmori T. Sanda S. Ueda F. “Anti-Shudder Mechanism of ATF Additives (Part 2)” Journal of Japanese Society of Tribologists 47 7 2002 575 581
- Kugimiya T. “Effects of Additives of ATF and Components of Friction Material for AT on μ -v Characteristics” Journal of Japanese Society of Tribologists 45 5 2000 387 395
- Maruo K. Matsumoto H. Fujii T. “High Energy Slipping Friction Material for Torque Converter Clutch” SAE Paper, 2006-01-0152
- Li S. Devlin M. T. Tersigni S. H. Jao T-C. Yatsunami K. Cameron T. M. “Fundamentals of Anti-Shudder Durability: Part I -Clutch Plate Study” SAE Paper, 2003-01-1983
- Devlin M. T. Tersigni S. H. Li S. Turner T. L. Jao T-C. Yatsunami K. Cameron T. M. “Fundamentals of Anti-Shudder Durability: Part II - Fluid Effects” SAE Paper, 2003-01-3254
- Murakami Y. Linden J. L. Flaherty J. E. Sprys J. King T. E. Ueda F. Kurashina H. Furumoto M. Iwamoto S. Kagawa M. “Anti-Shudder Property of Automatic Transmission Fluids - A Study By the International Lubricants Standardization and Approval Committee (Ilsac) Atf Subcommittee” SAE Paper, 2000-01-1870
- Umezawa S. Fujii T. “Study on the torque capacity of a lock-up clutch - Part 2 The effect of hydraulic sealing mechanism of the facing-” JSAE Tech. Paper, No. 9637113 1996
- Ueyama S. Fujii T. “Study on the Shudder of a Lock-up Clutch - The Shape of Friction Surface and the Hydraulic Sealing Mechanism -” JSAE Tech. Paper, No. 9941160 1999
- Ohyama T. Chen H. Ishida M. “EHL between Rail and Wheel of Railways” Journal of Japanese Society of Tribologists 49 4 2004 316 322
- Okamoto Y. “EHL Analyses on Plain Bearings for Engines” Journal of Japanese Society of Tribologists 49 4 2004 323 329
- Patir N. Cheng H. S. “An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication” Transactions of the ASME 100 1978 12 17
- Patir N. Cheng H. S. “Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces” Transactions of the ASME 101 1979 220 230
- Itoh J. Ishihara N. Suzuki M. Kayama S. Sogabe K. Shimizu N. “Study for judder analysis of lock up clutch - Part 1: Analysis theory and simulation of judder phenomena -” JSAE Tech. Paper, No. 9538942 1995
- Miyoshi T. Suzuki M. Kayama S. Sogabe K. Shimizu N. “Study for shudder analysis of lock-up clutch - Part 2: Parameter study and analysis of slip shudder -” JSAE Tech. Paper, No. 9637122 1996
- Spikes H. “Recent advances in liquid lubrication research” Proceedings of the third asia international conference on tribology 1 2006 17 18