This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation and Experimental Studies on Combustion and Performance Characteristics for a Turbocharged and Naturally Aspirated Multi-Cylinder Compression Ignition Engine
Technical Paper
2006-01-3487
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The paper discusses the potential of a conventional light duty indirect injection diesel engine for operation under naturally aspirated and turbocharged conditions. An exhaust gas New Garret air turbocharger with waste-gate control was used for the present investigations. The results of an extensive experimental programme using an 2.4 liter in-line four-cylinder engine are presented to predict the pressure crank angle diagram, brake power output, brake specific energy consumption, delay period, rate of pressure rise, volumetric efficiency, peak cylinder pressure, exhaust gas temperature and coefficient of variation. The paper also presents some numerical results and a comparison between computed and experimental pressure crank angle diagram for turbocharged diesel engine. The overall analysis of the results shows a 17 percent increase in power output, 12 percent increase in volumetric efficiency and 20 percent improvement in brake specific energy consumption compared to base line engine.
Recommended Content
Technical Paper | Electrostatic Atomization Insertion into Compression Ignition Engines |
Technical Paper | The Diesel as a High-Output Engine for Aircraft |
Technical Paper | Theoretical Study on Tolerance of Fuel Injection System of Diesel Engine |
Citation
Ahmad, N. and Gajendra Babu, M., "Simulation and Experimental Studies on Combustion and Performance Characteristics for a Turbocharged and Naturally Aspirated Multi-Cylinder Compression Ignition Engine," SAE Technical Paper 2006-01-3487, 2006, https://doi.org/10.4271/2006-01-3487.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Freeman, P. F. Walsham, B.E. “A guide to some Analytical Turbocharger Matching Techniques” Proceedings of I.Mech.E. 1978
- Way, R.J.B Wallace, F.J “Results of Matching Calculations for Turbocharged and Compound Engines with Reduced Heat Loss” SAE paper 860329 1986
- Assanis, D.N Heywood, J.B “Development and use of Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies” SAE paper 869329 1986
- Watson, N Janota, M.S “Turbocharging the Internal Combustion Engine” Macmillan Publishers Ltd 1982
- Watts, P.A Heywood, J. B “Simulation Studies of the Effects of Turbocharging and Reduced Heat Transfer on Spark Ignition Engine Operation” SAE paper 800029 1980
- Pischinger, R. Cartellieri, W. “Combustion System Parameters and Their Effects Upon Diesel Engines Exhaust Emissions” SAE paper 720756 1972
- Watson, N. “Turbochargers for the 1980's Current Trends and Future Prospects” SAE paper 790063 1979
- Suzuki, T. Joko, I. Kakegawa, T. “Development of Hino Turbocharged Diesel engines” SAE paper No. 840015 19984
- Beck, N. John “Optimized EFI for Natural gas fueled Engine” SAE paper No. 911650 1991
- Kamo, Y. Bryzik, Walter “Cummins - TARADCOM. Adiabatic Turbo compound Engine Program” SAE Paper No. 810070 1981
- Watson, N. “Eliminating Rating effects on Turbocharged Diesel Engines’ SAE Paper 840134 1984
- Uthoff, L. H. Yakimow, J. W. “Supercharger versus Turbocharger in Vehicle Application” SAE paper 870704 1987
- Schron, N. Pischinger, E. Schulta, H. “Computer Simulation of Turbocharged Diesel Engines Under Transient Conditions” SAE paper No. 870723 1988
- Kinley, T. L. Mc. Primus, R. J. “An Assessment of Turbocharging System for Diesel Engines From First and Second law Perspectives” SAE paper 880598 1988
- Tomita, T. “Hybrid Charging System for Heavy Duty Diesel Engines” SAE paper 910419 1991
- Okada, N. “Hino's New Turbocharged Diesel Engine for Improved Fuel Economy” Int. J. of Vehicle Design 4 5 UK 1983
- Dewhirst, Keith. Alexander James, Ewen Mc. Marsh, Kerry. William Firth, Mark. Robert “Design and Development of the Holset Hx Series of Turbochargers” SAE paper 900356 1990
- Holtman, R.H “Testing of a Lowe Specific Fuel Consumption Turbocharged Engine” SAE paper 870300 1987
- Brands, M. C. “Helmholtz Tuned Induction System for Turbocharged Diesel Engine” SAE paper 790069 1980
- Wurm, J. Kinast, J. A. Bulicz, T. “Assessment of Positive Displacement Supercharging and Compounding of Adiabatic Diesel” SAE paper 840430 1984
- Walsham, B.E. “Alternative Turbocharger Systems for the Automotive Diesel Engine” Proc. International System on Automotive Technology and Automation 39 1979
- Anada, S. Kawakami, T. Shibata, N. “Development of SJ (Swirl Jet) Turbocharger for Diesel Engine Vehicle” SAE paper 970341 1997
- Hikosaka, N. “A View of the Future of Automotive Diesel Engine” SAE paper 972682 1997
- Schindler, K.P. “Why Do We Need the Diesel” SAE paper 972684 1997
- Daisho Y. et al “Controlling Combustion and Exhaust Emissions in a Direct Injection Diesel Engine Dual Fueled with Natural Gas” SAE paper No. 952436 1995 107
- Moromoto S. et al “Operating Characteristics of a Natural Gas-Fired Homogeneous Charge Compression Ignition Engine SAE paper No. 2001 - 01 - 1034 2001 1 7
- Ohta, Y. et al. “Premixed-Compression-Ignition Natural-Gas Engine” Trans. JSAE 31 3 2000 39 43
- Kohketsu, S. Mori, K. Sakai, K. Hakazaki, T. “EGR Technologies for a Turbocharged and Intercooled Heavy-Duty Diesel Engine” SAE paper 970340 1997
- Ahmad-I Nafis Babu, M. K. G Ramesh, A. “Investigations on Combustion and Performance Characteristics of a Turbocharged Natural gas and Pilot Ignition Dual Fuel Engine” SAE paper 2005 - 01 - 3775 2005
- Gajendra Babu, M. K Murthy, B. S. “Simulation and Evaluation of a Four Stroke Single Cylinder Spark Ignition Engine” SAE paper 750687 1975
- Mathur, H. B. Gajendra Babu, M.K Subba Reddy, K.S. “A Thermodynamic Simulation Model for a Methanol Fueled Spark ignition Engine” SAE paper 830333 1983
- Hohenberg, G. F. “Advanced approaches for Heat Transfer calculations” SAE paper No. 790825 1979
- Bracco, F. V. “Modeling and Diagnostics of Combustion in Spark Ignition Engines” COMODIA Tokyo Sept 1985
- Ramos, J.I “Internal Combustion Engine Modeling” Hemisphere Publishing Corporation 1989
- Austen, A. E. W. Lyn, W.T. “The Application of Heat Release Analysis to Engine Combustion Study” C.I.M.A.C., Conf. Copenhagen 1962
- Mohanan, P Gajendra Babu, M. K. “A Simulation Model for a Methanol Fueled Turbocharged Multi-Cylinder Automotive Spark Ignition Engine” SAE paper 912417 1991
- Ahamd Nafis “Investigations on the Utilization of Natural gas In an Indirect Injection Diesel Engine” Indian Institute of Technology New Delhi August 1999