This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formed-In-Place Gaskets in Powertrain Applications – Experimental and Numerical Evaluation Under Service Conditions
Technical Paper
2006-01-3353
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Flat faced joints sealed with Formed-In-Place gaskets are in widespread use in powertrain applications like engines and gear boxes. The demand to reduce time and costs in the development phase requires choosing the right gasket material, and suitable flange design already at early design stage. Thus, a better understanding of the factors controlling joint strength under realistic service conditions is needed. The paper presents appropriate test methods and numerical analysis of joints sealed with Formed-In-Place gaskets.
Recommended Content
Journal Article | How to Evaluate the Compatibility of Thermoplastic Materials with Lubricants |
Technical Paper | Applying the Law of Diffusion to Automotive Lamp Venting |
Technical Paper | Entry Level Dual-Clutch Transmission for India |
Authors
Citation
Kreuzer, R. and Romanos, G., "Formed-In-Place Gaskets in Powertrain Applications – Experimental and Numerical Evaluation Under Service Conditions," SAE Technical Paper 2006-01-3353, 2006, https://doi.org/10.4271/2006-01-3353.Also In
References
- Kreuzer R. Kilian S. Wang Z. Drei Verfahren zur Prüfung von Flüssigdichtungen in Getriebegehäusen. Antriebstechnik 38 10 Vereinigte Fachverlage Mainz, Germany 1999
- Kreuzer R. Romanos G. Zuverlässigkeit von Flächendichtungen auf Basis von Flüssigdichtmitteln unter dynamischer Beanspruchung VDI Berichte 69 88 VDI Verlag GmbH Düsseldorf, Germany 2000
- Kreuzer R. Romanos G. Becher J. Pouya-Bahar H Adhesives to Seal - Experimental and Numerical Evaluation under Service Conditions 22 nd CAD-FEM Users'Meeting 2004 November 10-12 2.10.13.1 2.10.13.10 CAD-FEM GmbH Grafing, Germany 2004
- Kreuzer R. FIP Dichtungen im Antriebsstrang - Konstruktion und Auslegung FVA Seminar Grundlagen der Dichtungstechnik Stuttgart 8 9 2 2006 325 340 Stuttgart, Germany 2006
- Raghava R. S. Cadell R. M. The macroscopic yield behaviour of polymers J. Material Science 8 225 232 1973
- Dean, G. Hu, F. Duncan, B. The application of finite element methods to the design of adhesive joints BENCHmark 10 7 9 1988
- Bigwood, D. A. Crocombe, A. D. Non-linear adhesive bonded joint design analyses Int. J. Adhesion and Adhesives 10 1 31 41 Elsevier Limited Oxford, UK 1990
- Crocombe, A. D. Richardson, G. Assessing stress state and mean load effects on the fatigue response of adhesively bonded joints Int. J. Adhesion and Adhesives 19 1 19 27 Elsevier Limited Oxford, UK 1999
- Kreuzer R. Fatigue Tests at Gasket Test Rig 2 Henkel Technologies, Internal Report MRD 01-06 August 21 2001
- Becher, J. Kleiner, F. Bestimmung mechanischer Eigenschaften von dünnen Klebschichten zur Kennwertermittlung für die Simulation Tagung Werkstofftechnik 4 5 12 2003 64 70 Verlag Stahleisen Düsseldorf, Germany 2003
- Bornemann, J. Schlimmer, M. Kennwertermittlung und mechanische Modellbildung zur Berechnung geklebter Verbindungen Tagungsband 20 th CAD-FEM User's Meeting Friedrichshafen 9.-11 10 2002 2.5.3.1 2.5.3.11 CAD-FEM GmbH Grafing, Germany 2002