This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Comparative Study between Hydraulic and Elastomeric mount, both applied for automotive engine mount system
Technical Paper
2006-01-2608
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
With the strong competition of the automotive market, aspects as quality and cost become priority in the search of competitiveness. Several companies work in proposals seeking cost reduction without quality loss. Several vehicles inside of Brazilian market use the hydraulic mount at their engine mount system, the initial proposal search the substitution of this kind of mount by an elastomeric mount. Following this proposal, we have this article that intends to compare the behavior between the hydraulic mount and elastomeric mount. Besides the researched bibliography, we accomplished the practical comparative study. We observed that the elastomeric mount presented substantial improvement since the seventies improving its isolation vibration performance at high frequency range. The hydraulic mount presents high damping at low frequency range but its isolation vibration performance at high frequency doesn't overcome the performance of the elastomeric mount. Due to the cost of the elastomeric mount to be smaller than hydraulic mount cost, the elastomeric mount becomes great attractive, besides the cost, it should be also evaluate the performance for the user's comfort and studies in specialized laboratories should be accomplished.
Recommended Content
Topic
Citation
Barbetti, M. and Barbosa, R., "Comparative Study between Hydraulic and Elastomeric mount, both applied for automotive engine mount system," SAE Technical Paper 2006-01-2608, 2006, https://doi.org/10.4271/2006-01-2608.Also In
References
- BARBER, A. Handbook of noise and vibration control 6 Oxon Elsevier 1992
- BERNUCHON, M. A new generation of engine mounts INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1984 Papers Warrendale Society of Automotive Engineers 1984 SAE paper, 840259
- COGSWELL, J. A. MALEN, D. E. Engine mount for integral body vehicle INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1983 Papers Warrendale Society of Automotive Engineers 1983 SAE paper, 830258
- COLGATE, J. E. CHANG C. T. CHIOU Y. C. LIU W. K. KEER, L. M. Modeling of hydraulic engine mount focusing on response to sinusoidal and composite excitations Journal of Sound and Vibration 184 3 503 528 jul 1995
- CORCORAN, P. E. TICKS G. H. Hydraulic engine mount characteristics INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1984 Papers Warrendale Society of Automotive Engineers 1984 SAE Paper, 840407
- DEUTSCHER INSTITUTE NORMENAUSSCHUSS DIN 53513 : determination of viscoelastic properties of elastomers 1990
- FLOWER, W. C. Updating a 30-year old concept in vibration control INTERNATIONAL TRUCK AND BUS MEETING AND EXPOSITION Winston-Salem, North Carolina 1995 Papers Warrendale Society of Automotive Engineers 1995 SAE paper, 952666
- GADE, S. KAVERI, K. KOSTANTIN-HASEN, H. HERLUFSEN, H. Complex modulus and damping measurements using resonant and non-resonant methods NOISE AND VIBRATION CONFERENCE AND EXPOSITION Traverse City, Michigan 1995 Papers Warrendale Society of Automotive Engineers 1995 SAE paper, 951333
- GEISBERGER, A. KHAJEPOUR, A. GOLNARAGHI, F. Non-linear modeling of hydraulic mounts theory and experiment Journal of Sound and Vibration 249 2 371 397 jan 2002
- KARANTH, N. V. RAJU S. KUMBHAR M, S. VIJAYALAKSHMI, M. Design and evaluation of engine mounts of a passenger utility vehicle SYMPOSIUM ON INTERNATIONAL AUTOMOTIVE TECHNOLOGY Pune, India 1996 Papers Warrendale Society Automotive Engineers 1996 SAE paper, 962493
- KIM, G. SINGH, R. A study of passive and adaptive hydraulic engine mount system with emphasis on non-linear characteristics Journal of Sound and Vibration 179 3 427 453 jun 1995
- LEE, K. H. CHOI, Y. T. HONG S. P. Performance design of hydraulic mount for low frequency engine vibration and noise control INTERNATIONAL OFF-HIGHWAY & POWERPLANT CONGRESS AND EXPOSITION Milwaukee, Wisconsin 1994 Papers Warrendale Society of Automotive Engineers 1994 SAE paper, 941777
- LINDLEY, P. B. Engineering design with natural rubber 4 Hertford The Malaysia Rubber Producer's Research Association 1978 NR Technical Bulletins
- MÜLLER M. WELTIN, U. LAW, D. ROBERTS, M.M. SIEBLER, T.W. Engine mounts and NVH Automotive Engineering 102 7 19 23 jul. 1994
- MÜLLER, M. ECKEL H. G. LEIBACH M. BORS W. Reduction of noise and vibration in vehicles by appropriate engine mount system and active absorbers INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1996 Papers Warrendale Society of Automotive Engineers 1996 SAE paper, 960185
- MÜLLER, M. WELTIN U. LAW D. ROBERTS M. M. SIEBLER T. W. The Effect of engine mounts on the noise and vibration behavior of vehicles INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1994 Papers Warrendale Society of Automotive Engineers 1994 SAE paper, 940607
- MUZECHUK, R.A. Hydraulic mounts-improved engine isolation INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1984 Papers Warrendale Society of Automotive Engineers 1984 SAE paper, 840410
- RIVIN, E. I. Passive engine mounts: some directions for further development INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1985 Papers Warrendale Society of Automotive Engineers 1985 SAE paper, 850481
- SCHMITT R.V. LEIGANG C. J. Design of elastomeric vibration isolation mounting system for internal combustion engines ANNUAL EARTHMOVING INDUSTRY CONFERENCE 27 Peoria, Illinois 1976 Papers Warrendale Society of Automotive Engineers 1976 SAE paper, 760431
- SHANGGUAN W. B. LU Z. H. Modeling of a hydraulic engine mount with fluid-structure interaction finite element analysis Journal of Sound and Vibration 275 1-2 193 221 2003 http://www.sciencedirect.com.
- STRAW, R. L. The development of isolation mounts ANNUAL EARTHMOVING INDUSTRY CONFERENCE 35 Peoria, Illinois 1984 Papers Warrendale Society of Automotive Engineers 1984 SAE paper, 840781
- SWANSON, D. A. Active engine mounts for vehicles INTERNATIONAL OFF-HIGHWAY & POWERPLANT & EXPOSITION Milwaukee, Wisconsin 1993 Papers Warrendale Society of Automotive Engineers 1993 SAE paper, 932432
- TAYLOR, H. J, Jr. The new generation of engine mounts 1986 INTERNATIONAL CONGRESS AND EXPOSITION Detroit, Michigan 1986 Papers Warrendale Society of Automotive Engineers 1986 SAE Paper, 862052
- TSUJIUCHI, N. KOIZUMI T. YAMAZAKI K. SHIBAYAMA T. Vibration analysis of engine supported by hydraulic mounts NOISE VIBRATION CONFERENCE AND EXPOSITION Michigan 2003 Papers Warrendale Society of Automotive Engineers 2003 SAE paper, 2003-01-1465
- YU Y. NAGANATHAN N. G. DUKKIPATI R. V. A literature review of automotive vehicle engine mounting systems Mechanism and Machine Theory 36 1 123 142 jan. 2001