This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Flow Characteristics of Straight and Slanted Entry Nozzle Run by a Supersonic Stream
Technical Paper
2006-01-2423
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
An experimental study was conducted on 15° slanted entry nozzle to compare with same geometry straight entry Convergent-Divergent (CD) nozzle. The nozzle with design Mach number of 2.94 placed in a Mach 1.8 flow reveals that the nozzle can choke and deliver supersonic flow at its exit. In this paper the wall static pressure distribution along the length of the straight and slanted entry nozzle and its comparison with isentropic flow is discussed. The tests were conducted at different Nozzle Pressure Ratios (NPR) of the driving nozzle ranging from 3 to 7. The variation of inlet and exit Mach numbers for both straight and slanted entry nozzles run by a supersonic stream is also discussed. The separation location obtained by present experiment and from other empirical relations is compared.
Authors
Topic
Citation
Kumar, C., Elangovan, S., and Rathakrishnan, E., "Flow Characteristics of Straight and Slanted Entry Nozzle Run by a Supersonic Stream," SAE Technical Paper 2006-01-2423, 2006, https://doi.org/10.4271/2006-01-2423.Also In
References
- Frey, M. Hagemann, G. “Status of Flow Separation Prediction in Rocket Nozzles,” AIAA Paper 98–3619 July 1998
- Hagemann, G. Immich, H. Nguyen, T. V. Dumnov, G. E. “Advanced Rocket Nozzles,” Journal of Propulsion and Power 14 No. 5 Sept.-Oct. 1998 620 634
- Frey, M. Hagemann, G. “Restricted Shock Separation in Rocket Nozzles,” Journal of Propulsion and Power 16 No. 3 May-June 2000 478 484
- Deck, S. Guillen, P. “Numerical Simulation of Side Loads in an Ideal Truncated Nozzle,” Journal of Propulsion and Power 18 No. 2 March-April 2002 261 269
- Romine, G. L. “Nozzle Flow Separation,” AIAA Journal 36 No. 9 Sep. 1998 1618 1625
- Hagemann, G. Frey, M. Koschel, W. “Appearance of Restricted Shock Separation in Rocket Nozzles,” Journal of Propulsion and Power 18 No. 3 May-June 2002 577 584
- Verma, S. B. “Study of Flow Separation in Truncated Ideal Contour Nozzle” ” Journal of Propulsion and Power 18 No. 5 Sep.- Oct. 2002 1112 1121
- Morrisette, E. L. Goldberg, T. J. “Turbulent-Flow Separation Criteria for Overexpanded Supersonic Nozzles,” 1978 1 36
- Reshotko, E. Tucker, M. “Effect of a Discontinuity on Turbulent Boundary-Layer-Thickness Parameters with Application to Shock-Induced Separation,” 1955
- Papamoschou, D. Zill, A. “Fundamental Investigation of Supersonic Nozzle Flow Separation,” AIAA paper–2004 -1111.
- Miller, E. H. Migdal, D. “Separation and Stability Studies of a Convergent-Divergent Nozzle,” Journal Aircraft 7 No. 2 Mar-Apr. 1970 159 163
- Arens, M. Spiegler, E. “Shock-Induced Boundary Layer Separation in Overexpanded Conical Ext Nozzles,” AIAA Journal 1 No. 3 March 1963 578 581
- Back, L. H. Massier, P. F. Gier, H. L “Comparison of Measured and Predicted Flows Through Conical Supersonic Nozzle, with Emphasis on the Transonic Region,” AIAA Journal 3 No. 9 Sept. 1965 1606 1614
- Senthil Kumar, C. Elangovan, S. Stanley, A. J. Rathakrishnan, E. “Flow Characteristics of Convergent-Divergent Nozzle Kept in a Supersonic Stream,” AIAA Paper No. 2005–4381, 41 st Joint Propulsion Conference & Exhibit, Arizona, USA
- Sunley, H. L. G. Ferriman, V. N. “Jet Separation in Conical Nozzles,” Journal of the Royal Aeronautical Society 68 Dec. 1964 808 817
- Anderson., J. D. “Modern Compressible Flow,” The McGraw-Hill Companies, Inc. New York 2003
- Back, L. H. Cuffel, R. F. “Detection of Oblique Shocks in a Conical Nozzle with a Circular-Arc Throat,” AIAA Journal 4 No. 12 Dec. 1966 2219 2221
- Migdal, D. Kosson, R. “Shock Predictions in Conical Nozzles,” AIAA Journal 3 No. 8 Aug. 1965 1554 1556
- Lawrence, R. A. Weynand, E. E. “Factors Affecting Flow Separation in Contoured Supersonic Nozzles,” AIAA Journal 6 No. 6 June 1968 1559 1560