This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Pressure Swing Adsorption Technology for Spacesuit Carbon Dioxide and Humidity Removal
Technical Paper
2006-01-2203
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Metabolically produced carbon dioxide (CO2) removal in spacesuit applications has traditionally been accomplished utilizing non-regenerative Lithium Hydroxide (LiOH) canisters. In recent years, regenerative Metal Oxide (MetOx) has been developed to replace the Extravehicular Mobility Unity (EMU) LiOH canister for extravehicular activity (EVA) missions in micro-gravity, however, MetOx may carry a significant weight burden for potential use in future Lunar or planetary EVA exploration missions. Additionally, both of these methods of CO2 removal have a finite capacity sized for the particular mission profile. Metabolically produced water vapor removal in spacesuits has historically been accomplished by a condensing heat exchanger within the ventilation process loop of the suit life support system.
Advancements in solid amine technology employed in a pressure swing adsorption system have led to the possibility of combining both the CO2 and humidity control requirements into a single, lightweight device. Because the pressure swing adsorption system is regenerated to space vacuum or by an inert purge stream, the duration of an EVA mission may be extended significantly over currently employed technologies, while markedly reducing the overall subsystem weight compared to the combined weight of the condensing heat exchanger and current regenerative CO2 removal technology. This paper will provide and overview of ongoing development efforts evaluating the subsystem size required to manage anticipated metabolic CO2 and water vapor generation rates in a spacesuit environment.
Recommended Content
Authors
Citation
Papale, W., Paul, H., and Thomas, G., "Development of Pressure Swing Adsorption Technology for Spacesuit Carbon Dioxide and Humidity Removal," SAE Technical Paper 2006-01-2203, 2006, https://doi.org/10.4271/2006-01-2203.Also In
References
- Filburn, T. Dean, W.C. Thomas, G. “Development of a Pressure Swing CO 2 /H 2 O Removal System for an Advanced Sapcesuit,” SAE Paper No. 981673 1998
- “Designing for the Human Presence in Space: An Introduction to Environmental Control and Life Support Systems,” 1994