This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
System Considerations for an Exploration Spacesuit Upper Torso Architecture
Technical Paper
2006-01-2141
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
NASA's Exploration Architecture announced in September 2005, calls for development and flight of a Crew Exploration Vehicle (CEV) no later than 2014 and return to the moon by 2020 with a goal to reach and explore Mars. Intra-Vehicular Activity (IVA) suit systems will need to comfortably protect the crew during launch entry and abort scenarios. Extra-Vehicular Activity (EVA) suit systems will need to provide the capability to perform contingency zero-gravity EVA from the CEV as well as surface EVA to explore the moon and Mars. Studies currently underway to begin definition of the IVA and EVA suits point to a two suit architecture, the first being a launch, re-entry, and contingency EVA system used from CEV, the second and later being a lunar surface mobility suit only. An important consideration, yet to be determined, is the level of commonality between the early CEV and late Lunar suits. One concept is to have maximum commonality beginning with the architecture of the spacesuit upper torso.
The upper torso is the foundation of the spacesuit. The upper torso supports the life support system, displays and controls, the opening for entry and closure, the helmet, and the shoulder and waist mobility joints. Upper torso architecture therefore, has a great affect on life support configuration, don/doff capability, mass and volume, suit sizing, and suit performance particularly in terms of visibility, mobility and comfort. Of prime consideration, is the upper torso material. Historically, hard upper torsos (HUTs) have been made of aluminum or composite, and soft upper torsos (SUTs) have been made of dual layer coated and noncoated fabrics. Architecture concepts have included waist entry, rear entry, and zipper closures. Upper Torso architecture is a key driver for the early CEV and late Lunar exploration spacesuit systems definition.
This paper provides a review of probable Constellation Program requirements, existing upper torso architectures, and material candidates. Recent developments in the ILC Dover I-Suit fabric upper torso are discussed in relation to meeting program goals. Trade assessments suggest that fabric upper torsos, common to both Constellation Program spacesuits, provide the best advantage to meet the goals of the program.
Authors
Topic
Citation
Ferl, J., Hewes, L., Cadogan, D., Graziosi, D. et al., "System Considerations for an Exploration Spacesuit Upper Torso Architecture," SAE Technical Paper 2006-01-2141, 2006, https://doi.org/10.4271/2006-01-2141.Also In
References
- Graziosi D. Ferl J. Splawn K. “Evaluation of a Rear Entry System for an Advanced Spacesuit” SAE International Conference on Environmental Systems Italy 2004
- Graziosi D. Ferl J. Splawn K. “An Examination of Spacesuit Entry Types and the Effects on Suit Architecture.” Space 2004 Conference AIAA 2004
- Graziosi, D Ferl, J Splawn, K. “Development of a Space Suit Soft Upper Torso Mobility/Sizing Actuation System,” SAE International Conference on Environmental Systems 2004-01-02342 Colorado Springs, CO 2004
- Graziosi, D Lee, R. “I-Suit Advanced Spacesuit Design Improvements and Performance Testing” SAE International Conference on Environmental Systems Vancouver, Canada 2003
- “Zvezda Orlan-DMA-HL, Space Suit Assembly (SSA) and Life Support Subsystem (LSS) Mini-Data Book,” ‘Hamilton Standard 1996
- Kosmo, J Spenny, W Gray, R Spampinato, P. “Development of the NASA ZPS Mark III 57.2-kN/m 2 (8.3 psi) Space Suit,” SAE International Conference on Environmental Systems 881101 San Fransisco, CA 1988
- Crew robotics and Vehicular Equipment (CRAVE) Contract Delivery Order #: CRAVE-EC-006 2005
- NASA's Exploration Architecture, presentation to industry September 2005
- NASA's Exploration Systems Architecture Study Final Report November 2005
- Assessment of the S1035 Advanced Crew Escape Suit for Use in the Space Launch Initiative Program Lockheed Martin Space Operations January 2003
- Assessment of Three Crew Escape Suit Concepts for the Space Launch Initiative Program Lockheed Martin Space Operations March 2003
- Spampinato Phil “Concept Paper Analysis of A Single Space Suit Architecture for Space Exploration Activities” June 2005
- Cadogan David Scheir Craig Dixit Anshu Ware Jody Ferl Janet Cooper Emily Dr. Kopf Peter Dr. “Intelligent Flexible Materials for Deployable Space Structures (InFlex)” SAE International Conference on Environmental Systems Virginia, Beach, VA 2006
- EMU Processing Requirements and Constraints, FEMU-R-001
- Specification/Assembly Drawing (S/AD) Part II for the Planar HUT Assembly, ILC Dover Document 0111-110102
- EMU Limited Life Item List, 1EVA-27-001 March 2006