This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Integrated Experimental-Numerical Study of HSDI Diesel Injection System and Spray Dynamics
Technical Paper
2006-01-1389
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents a complete numerical and experimental characterisation of the transient diesel spray of a modern 5-holes high pressure electronic controlled injector performed in a constant volume pressurised vessel.
The experimental analysis has been carried out using a self-developed injection rate measuring device, a visualisation rig based on a Nd-Yag pulsed laser and a synchronized CCD camera to measure spray penetration and spray cone angles and a PDA equipment to measure droplets size and velocity.
The numerical analysis has been carried out by statically coupling a 1D model of the common rail injection system to a full 3D computation of both gas and fuel spray dynamics. The 1D injection system model has been developed in the AVL HYDSIM environment and the reliability of the model is demonstrated by comparing the numerical results with the experimental data. The multidimensional numerical simulation tool is a modified version of the KIVA-3V code.
The developed numerical tool is calibrated and validated through the comparison between numerical results and measurements in terms of spray penetration, spray cone angle, droplets size and velocity distribution.
Recommended Content
Authors
Citation
Postrioti, L. and Ubertini, S., "An Integrated Experimental-Numerical Study of HSDI Diesel Injection System and Spray Dynamics," SAE Technical Paper 2006-01-1389, 2006, https://doi.org/10.4271/2006-01-1389.Also In
References
- Stumpp, G. Ricco, M. 1996 “Common Rail - An Attractive Fuel Injection System for Passenger Car DI Diesel Engines” SAE Paper 960870
- Boehner W. Hummel K. 1997 “Common Rail System (CR-System) for Commercial Diesel Vehicles” SAE Paper 970345
- Ubertini, S. Mariani, F. Postrioti, L. 2004 “Experimental Validation of a Spray Breakup Model in High Pressure Ambient Conditions” THIESEL 2002 61 86 Springer Verlag Book
- Rocco, V. Ubertini, S. Postrioti, L. 2002 “Numerical Analysis of Autoignition in DI Diesel Engine” IASTED International Conference on Applied Simulation and Modelling
- Grimaldi, C.N. Postrioti, L. Bella G. Ubertini, S. 2005 “Study of the influence of the injection system in a multi-dimensional spray simulation” SAE Paper 2005-24-88
- Rotondi, R. Bella, G. Grimaldi, C.N. Postrioti, L. 2001 “Atomization of High Pressure Diesel Spray: Experimental Validation of a New Breakup Model” SAE Paper 2001-01-1070
- Takamura A. Ohata T. Fukushima S. Kamimoto T. 1992 “A Study on Precise measurement o Diesel Fuel Injection Rate” SAE Paper 920630
- Ishikawa S. Ohmori Y. Fukushima S. Suzuki T. Takamura A. Kamimoto T. 2000 “Measurement of Rate of Multiple Injection in CDI Engines” SAE Paper 2000-01-1257
- Postrioti, L. Grimaldi, C.N. Ceccobello, M. Di Gioia, R. 2004 “Diesel Common Rail Injection System Behavior with Different Fuels” SAE 2004 World Congress, SAE Paper 2004-01-0029
- Grimaldi, C. N. Postrioti, L. 2000 “Experimental Comparison between Conventional and Bio-derived Fuels Sprays from a Common Rail Injection System” SAE Paper 2000-01-1252 . SAE 2000 Transactions Journal of Engines, Section 3 109
- AVL HYDSIM ver. 4.4 Reference Manual
- Bella, G. Rocco, V. Ubertini, S. 2003 “Combustion and Spray Simulation of a DI Turbocharged Diesel Engine” Journal of Engines - SAE Transactions 2002 2549 2565
- Pontoppidan, M. Ausiello, F. Bella, G. Ubertini, S. 2003 “Study of the Impact of the Combustion Process of Injector Nozzle Layout Creating Enhancing Spray Secondary Break-up” SAE Paper 2003-01-0706
- Pontoppidan, M. Ausiello, F. Ubertini, S. Bella, G. 2004 “Study of the Impact of the Spray Shape Stability and the Combustion Process of Supply Pressure Fluctuations in CR-Diesel Injectors” SAE Paper 2004-01-0023
- Arcoumanis, C. Flora, H. Gaivaises, M. Kampanis, M. Horrocks, R. 1999 “Investigations of Cavitation in a Vertical Multi-Hole Injector” SAE Paper 1999-01-0524
- Dan, T. Yamamoto, T. Senda, J. Fujimoto, H. 1997 “Effect of Nozzle Configurations for Characteristics of Non-Reacting Diesel Fuel Spray” SAE Paper 970355
- Schmidt, D. P. Rutland, C. J. Corradini, L. M. Roosen, P. Genge, O. 1999 “Cavitation in Two-Dimensional Asymmetric Nozzles” SAE Paper 1999-01-0518
- Reitz, R.D. Diwakar, R. 1987 “Structure of High Pressure Fuel Sprays” SAE Paper 870598
- O'Rourke, P.J. Amsden, A.A. 1987 “The Tab Method for Numerical Calculation of Spray Droplet Breakup” SAE Paper 872089
- Tanner, F.X. 1997 “Liquid Jet Atomization and Droplet Breakup Modelling of Non-Evaporating Diesel Fuel Sprays” SAE Paper 970050
- Ibrahim, E.A. Yang, H.Q. Przekwas, A.J. 1993 “Modeling of Spray Droplets Deformation and Breakup” AIAA J. Propulsion and Power 9 651 654
- Patterson, M. A. Reitz, R. 1998 “Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission” SAE Paper 980131