This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Paint Bake Response on the Vehicle
Technical Paper
2006-01-0985
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The average weight of a car has increased significantly in recent years due to higher crash requirements and demands in standard equipment. Therefore, BMW has decided to use aluminium for the body front end of the new BMW 5-series. During the paint process, the 6XXX-alloys currently adopted for the body front end exhibit a considerable increase in yield strength in the E-coat dryer. The increase of strength, the so-called paint bake response of 6XXX-alloys, needs to be fully exploited to meet the increasing demand of future passive safety concepts.
Recommended Content
Technical Paper | Competitive Opportunity Management |
Technical Paper | Development and Application of Laser Scanning Method to Automotive Component Manufacturing |
Technical Paper | Supplier Improvement Process Plan |
Authors
Citation
van Tol, R. and Pfestorf, M., "Paint Bake Response on the Vehicle," SAE Technical Paper 2006-01-0985, 2006, https://doi.org/10.4271/2006-01-0985.Also In
References
- Bottema. J. Zhuang, L. Bergsma, A. Bad Nauheim 1998
- Bryant, J.D. Kung, H. Mishra, A. The effects of pre-aging treatments on precipitation in Al-Mg-Si automotive body sheet alloys San Antonio Conference, Automotive Alloys II The Minerals, Metals and Materials Society 1998
- Bryant, J.D. The effects of pre-aging treatments on formability and paint bake response in aluminium autobody sheet alloys Orlando Conference, Automotive Alloys II The Minerals, Metals and Materials Society 1997
- Furrer, P. Bloeck, M. Landsberg/ Lech Verlag Moderne Industrie 2001
- Groeneboom, P. Kraaikamp, C. Lopuhaä, H.P. van der Weide, J.A.M. Delft 1999
- Kang, S.B. Zehn, L. Kim, H.W. Lee, S.T. Effect of cold rolling and aging treatment on mechanical property and precipitation behaviour in an Al-Mg-Si alloy Materials Science Forum 1996
- Kleiner, S. Henkel, Ch. Schulz, P. Uggowitzer, P.J. Paint bake response of aluminium alloy 6016 Zurich/ Ranshofen Aluminium 77 2001
- Korevaar, B.M. den Ouden, G. Delft Delft University Press 1998
- Korevaar, B.M. den Ouden, G. Delft Delft University Press 1998
- Miao, W.F. Laughin, D.E. Effects of Cu Content and Preaging on Precipitation Characteristics in Aluminium Alloy 6022 Metallurgical and materials transactions A 31A February 2000
- Renouard, M Meillat, R. 1960
- Saga, M. Sasaki, Y. Kikuchi, M. Yan, Z. Matsuo, M. Effect of pre-aging temperature on the behaviour in the early stage of aging at high temperature for Al-Mg-Si alloy Material Science Forum 1996
- Uchida, H. Yoshida, H. Improvement in paint bake response of an Al-Mg-Si by reversion Cleveland The Minerals, Metals and Materials Society 1996
- The European automotive industry meets the challenges of the year 2000 - Strasbourg 21-22-23 June 1995 Conference B: Chassis-Body Engineering Paris SIA (Société des ingenieurs de l'automobile) 1995
- Woo, K.D. Lee, J.S. Kim, S.W. Effect of Retrogression and Reaging on Bake Hardenability in Al-mg-Si-(Cr,Be) Alloys Pusan Light Materials for Transportation Systems 2001
- Zehn, L. Kang, S.B. Kim, H.W. Effect of natural aging and preaging on subsequent precipitation process of an Al-Mg-Si alloy with high excess silicon Materials Science and Technology 1997
- Zhuang L. Janse J.E. De Smet P. Chen J.H. Zandbergen H.W. Natural Ageing Effect on the Bake Hardening Response in Al-Si-Mg Alloys Seattle Aluminum 2001, Proceedings of the TMS 2001 annual meeting aluminum automotive and joining symposia 2001