This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
“OPERAS” In Advanced Diesel Engines for Commercial and Military Applications
Technical Paper
2006-01-0927
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Advanced diesel engines developed for the commercial market need to be adapted to the military requirements by OPERAS (Optimizing the injection pressure P, the Exhaust gas recirculation E, injection events Retard and/or Advance and the swirl ratio S). The different after treatment devices, already used or expected to be applied to diesel engines, require feed gases of appropriate properties for their efficient operation. To produce these gases some OPERAS are needed to control the diesel combustion process. Since military vehicles do not need the after treatment devices, the OPERAS of the commercial engines should be modified to meet the military requirements for high power density, better fuel economy, reduction of parasitic losses caused by the cooled EGR system, and reduction of invisible black and white smoke in the field. The data for this paper were obtained from an experimental investigation conducted on a single cylinder diesel engine equipped with a common rail injection system, under different loads and speeds, covering a wide range of operating variables. 2-D and 3-D trade-off maps are developed to identity the OPERAS for the commercial engines, considering the type of the after treatment device used. The possibilities for adapting such engines to the military requirements are explained.
Recommended Content
Topic
Citation
Henein, N., Singh, I., and Bryzik, W., "“OPERAS” In Advanced Diesel Engines for Commercial and Military Applications," SAE Technical Paper 2006-01-0927, 2006, https://doi.org/10.4271/2006-01-0927.Also In
References
- Henein, N. A. Lai, M.-C. Wang, D. Liu, L. Miles, P. 2000 “Combustion and Emission Characteristics of a Single-Cylinder HSDI Diesel Engine,” Proceedings of the 2000 Technical Meeting of Central State Combustion Institute 157 162 Indianapolis April 16-18 2000
- Henein, N. A. Lai, M-C. Singh, I. Wang, D. Lui, L. “Emission Trade-Off and Combustion Characteristics of a High-Speed Direct Injection Diesel Engine,” SAE paper 2001-01-097 2001
- Henein, N. A. Singh, I. P. Zhong, L. Lai, M-C Miles, P. Bryzik, W. “New Integrated “O.P.E.R.A.S.” Strategies for Low Emissions in HSDI Diesel Engines,” SAE 2003-01-0261 2003
- Hotta, Y. Nakakita, K. Fuyuto, T. Inayoshi, M. Fujiwara, K. Sakata, I. “Cause Of Exhaust Smoke And Its Reduction Methods In An HSDI Diesel Engine Under High-Speed And High-Load Conditions” SAE Paper 2002-01-1160 2002
- Miles, P. Sick, V. Megerle, K. Richards, K. Nagel, Z Reitz, R. “The Evolution of Flow Structures and Turbulence in a Fired HSDI Diesel Engine” SAE paper 2001-01-3501 2001
- Aceves S M Flowers D L 2005 “A Detailed Chemical Kinetic Analysis of Low-Temperature, Non-Sooting Diesel Combustion” SAE 2005-01-0923
- Akiham, K. Takatori, Y. Inagaki, K. Sasaki, S. Dean, A. M. 2001 “Mechanism of the smokeless Rich Diesel Combustion by Reducing Temperature,” SAE 2001-01-0655
- Sasaki, S. Ito, T. Goto, M. Yoshizaki, K “A Study of Low Temperature Diesel Combustion System, (2001),” Toyota Technical Review 50 2 Mar. 2001
- Kimura, S. Aoki, O. Ogawa, H. Muranaka, S. Enomoto, Y. “New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines,” SAE 1999-01-3681
- Cooper, B.J. Thoss, J.E. “Role Of NO In Diesel Particulate Emission Control” SAE Paper 890404 1989
- Zelenka P. Michael P. Wolfgang C. “Ways to meet future emission standards with diesel engine powered sport utility vehicles (SUV)” SAE Paper 2000-01-0181