This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Hardware-In-the-Loop Simulation for Scooter Engine Control
Technical Paper
2006-01-0614
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In order to reduce engine control strategy development time and cost, the Hardware-In-the-Loop (HIL) simulation technology is developed. This paper establishes a simulation model and control platform based on the HIL structure for studying control strategy development and verification. A 125c.c. engine model verified by the experimental data is established in Matlab/Simulink, which is used as a virtual engine and then implemented in the xPC real-time system. The Motorola MC 68376 controller chip provides control signals included injection duration/timing and ignition timing for the virtual engine. A PCI-6024E input/output board is used as an interface between the controller and the virtual engine. A simulation model, which consists of engine, powertrain, tire, and pitch plane dynamics, is used to evaluate the response of engine dynamics and longitudinal dynamics via HIL simulation.
Recommended Content
Authors
Topic
Citation
Wu, Y., Chen, B., Hsieh, F., Huang, M. et al., "Development of Hardware-In-the-Loop Simulation for Scooter Engine Control," SAE Technical Paper 2006-01-0614, 2006, https://doi.org/10.4271/2006-01-0614.Also In
References
- European Commission “Current and Future European Community Emission Requirements,” 2003
- Paolo, B. et al. “ECU Development and Testing Through Numerical Optimization and Hardware in The Loop Simulations,” SAE Paper No. 2001-01-1865
- Nabi, S. Balike, M. Allen, J. Rzemien, K. “An Overview of Hardware-In-the-Loop Testing Systems at Visteon,” SAE Paper No. 2004-01-1240
- Richert, J. Schutte, H. dSPACE GmbH “Automated Test of ECUs in a Hardware in the Loop Simulation Environment,” Proceedings of the IEEE International Symposium on Computer-Aided Control System Design 1999 587 594
- Jun, L. Jinzhi, F. Jianwu, Z. “The Rapid Development of Vehicle Electronic Control System by Hardware In the Loop Simulation,” SAE paper No. 2002-01-0568
- Isermann, R. Schaffnit, J. Sinsel, S. “Hardware-in-the-loop simulation for the design and testing of engine-control systems,” Control Engineering Practice 7 5 1999 643 653
- Wu, Y.-Y. Shiao, Y. Chen, B.-C. “Motorcycle Engine Modeling for Real Time Control,” 6th International Symposium on Advanced Vehicle Control 2002
- Yang, W.C. Glidewell, J. M. Tobler, W. E. Chui, G. K. “Dynamic modeling and analysis of automotive multi-port electronic fuel delivery system,” Journal of Dynamic Systems, Measurement and Control 113 1 Mar 1991 143 151
- Moskwa, J. J. Hedrick, J. K. “Modeling and Validation of Automotive Engines for Control Algorithm Development,” Journal of Dynamic Systems, Measurement, and Control 114 June 1992 278 285
- Moskwa, J. J. “Estimation of Dynamic Fuel Parameters in Automotive Engine,” Journal of Dynamic Systems, Measurement, and Control 116 December 1994 774 780
- Heywood, J. B. “Internal Combustion Engine Fundamentals,” McGraw-Hill Book Company 1988
- Wu, Y.-Y. Chen, B.-C. Hsieh, F.-C. “Heat Transfer Model for Small-Scale Air-Cooled Spark Ignition Four-Stroke Engines,” International Journal of Heat and Mass Transfer
- Yagi, S. Fujiwara, K. Kuroki, N. Maeda, Y. “Estimation of Total Engine Loss and Engine Output in Four Stroke S.I. Engines,” SAE Paper No. 910347
- Lee, W. Yoon, M. Sunwoo, M. “A Cost- and Time-Effective Hardware-In-the-Loop Simulation Platform for Automotive Engine Control Systems,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2003 217 1 41 52
- Ledin, J. A. “Hardware in the Loop Simulation,” Embedded Systems Programming 1999 12 2 42
- Mathworks. Inc. “xPC Target user's Guide”
- Wu Yuh-Yih Chen Bo-Chiuan Hsieh Feng-Chi “Modulization of Four-Stroke Single-Cylinder Spark-Ignition Air-Cooled Engine Models,” Computer Methods in Applied Mechanics and Engineering
- Chen, B.-C. Wu, Y.-Y. Huang, Y.-D. “Modeling and Control of Hybrid Electric Motorcycle with Direct-Driven Wheel Motors,” SAE Paper No. 2004-01-1054