This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Predictive Monitoring and Failure Prevention of Vehicle Electronic Components and Sensor Systems
Technical Paper
2006-01-0373
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Vehicle electronics and sensor systems have become indispensable parts in providing safety, comfort, personal communication mobility and many other advanced functions in today's vehicles. As a result, reliability requirements for these critical parts have become extremely important. To meet these requirements, more advanced technologies and tools for degradation monitoring and failure prevention are needed. Currently, the development of diagnostics and prognostics techniques, which employ accurate degradation quantification by appropriate sensor selection, location decision, and feature selection and feature fusion, still remains a vital and unsolved issue. This paper addresses several realistic concerns of failure prevention in vehicle electronics and sensor systems. A unified monitoring and prognostics approach that prevents failures by analyzing degradation features, driven by physics-of-failure, is suggested as a general framework to overcome the unsolved challenge. Many technologies and tools that could be included in this framework are presented and compared. Several examples are also provided to demonstrate these technologies and tools in practical use.
Recommended Content
Topic
Citation
Liao, H. and Lee, J., "Predictive Monitoring and Failure Prevention of Vehicle Electronic Components and Sensor Systems," SAE Technical Paper 2006-01-0373, 2006, https://doi.org/10.4271/2006-01-0373.Also In
SAE 2006 Transactions Journal of Passenger Cars: Electronic and Electrical Systems
Number: V115-7; Published: 2007-03-30
Number: V115-7; Published: 2007-03-30
References
- Lee J. Ahad A. Koç M. “e-Manufacturing- Its Elements and Impact” Proceedings of the Annual Institute of Industrial Engineering (IIE) Conference, Advances in Production Session Dallas, Texas, USA May 21-23 2001
- Koç M. Lee J. “e-Manufacturing and e- Maintenance- Applications and Benefits” International Conference on Responsive Manufacturing (ICRM) 2002 Gaziantep, Turkey June 26-29 2002
- Koç M. “A System Framework for Next- Generation E-Maintenance System” EcoDesign 2001, Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing Tokyo Big Sight Tokyo, Japan December 11 15
- Lall P. Islam N. Singh N. Suhling J. C. Darveaux R. “Model for BGA and CSP Reliability in Automotive Underhood Applications,” IEEE Transactions on Components and Packaging Technologies 27 585 593 2004
- Rahim K. M. Suhling J. C. Copeland S. D. Jaeger R. C. Lall P. Johnson W. R. “Characterization of Die Stresses in Flip Chip on Laminate Assemblies Using (111) Silicon Stress Test Chips,” Technical report 2005
- Yuan S. Ge M. Qiu H. Lee J. Xu Y. “Intelligent Diagnosis in Electromechanical Operations Systems” Proceeding of 2004 IEEE International Conference on Robotics and Automation New Orleans, LA. 2267 2272 2004
- Djurdjanovic D. Ni J. Lee J. “Time-Frequency Based Sensor Fusion in the Assessment and Monitoring of Machine Performance Degradation” Proceeding of 2002 ASME Int. Mechanical Eng. Congress and Exposition 2002
- Christianini N. Shawe-Taylor J. “An Introduction to Support Vector Machine and Other Kernel Based Learning Methods,” Cambridge University Press Cambridge, UK 2000
- Kemerait R. C. “New cepstral approach for prognostic maintenance of cyclic machinery,” IEEE SOUTHEASTCON 256 262 1987
- Bary W. W. etc. “Development of a Modular In-Situ Oil Analysis Prognostic System,” International Society of Logistics (SOLE) 1999 Symposium Las Vegas, Nevada August 30 September 2 1999
- Djurdjanovic D. Lee J. Ni J. “Watchdog Agent- An Infotronics-based Prognostics Approach for Product Performance Degradation Assessment and Prediction,” Advanced Engineering Informatics 17 2003 109 125
- Liao H. T. Elsayed E. A. “Reliability Prediction and Test Plan Based on An Accelerated Degradation Rate Model,” International Journal of Materials & Product Technology 21 5 2004 402 422
- Lall P. Islam N. Rahim K. Suhling J. Gale S. “Leading Indicators-of-Failure for Prognosis of Electronic and MEMS Packaging,” Proceedings of the 54th Electronic Components and Technology Conference 1570 1578 Las Vegas, NV June 1- 4 2004
- Lall P. Islam N. Suhling J. “Prognostication and Health Monitoring of Leaded and Lead Free Electronic and MEMS Packages in Harsh Environments,” Proceedings of the 55th IEEE Electronic Components and Technology Conference 1 9 Orlando, FL June 1-3 2005
- Ratanawilai T. B. Hunter B. Subbarayan G. Rose D. “A Study on The Variation Of Effective CTE of Printed Circuit Boards Through a Validated Comparison between Strain Gages and Moiré Interferometry,” IEEE Transactions on Components and Packaging Technologies 26 4 712 718
- Constable J. H. Lizzul C. “An Investigation of Solder Joint Fatigue Using Electrical Resistance Spectroscopy,” IEEE Transactions on Components and Packaging Technologies 18 1 142 152 1995
- Suhling J. C. Jaeger R. C. “Silicon Piezoresistive Stress Sensors and Their Application in Electronic Packaging,” IEEE Sensors Journal 1 1 14 30 2001
- Fukunaga K. Introduction to Statistical Pattern Recognition Academic press 1972
- Yan J. H. Koc M. Lee J. “A Prognostics Algorithm for Machine Performance Assessment and Its Application,” International Journal on Production Planning & Control 15 8 2004 796 801
- Yan J. H. Lee J. “Machine Degradation Assessment and Root Cause Classification Using Logistic Regression Method,” accepted for IEEE Transactions on Mechatronics 2003
- Cox D. R. “Regression Models and Life Tables,” Journal of Royal Statistical Society B 34 187 220 1972
- Liao H. T. Qiu H. Lin D. M. Banjevic D. Jardine A. K. S. Lee J. “A Predictive Tool for Remaining Useful Life Estimation of Rotating Machinery Components,” ASME International Biennial Conference on Mechanical Vibration and Noise Long Beach, CA Sep. 24 28 2005