This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mechanical, Thermal and Rheological Properties of Polymers Used in Plastic Fuel Tanks
Technical Paper
2006-01-0333
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The materials used for making plastic fuel tanks are: virgin high-density polyethylene; fuel tank regrind; ethylene vinyl alcohol copolymer (EVOH) fuel barrier; and maleic anhydride modified linear low-density polyethylene adhesive. Impact strength measurements were conducted per ASTM D256 using Izod & Charpy machine configurations. All polymers were found to have superior impact resistance at room temperature. The polyethylene and fuel tank regrind maintain superior impact at −40 °C; however, a sharp drop in impact resistance is noted for EVOH. Dynamic mechanical analysis (DMA) of EVOH showed that in addition to the glass transition at about 70 °C, the polymer undergoes a second order transition around −35 °C, which is responsible for embrittlement.
All materials are sensitive to the presence of notches or sharp discontinuities. Notched Izod impact resistance is five to ten times lower for polyethylene matrices; and forty times lower for EVOH than unnotched samples.
Melt rheology measurements were conducted a capillary rheometer at temperatures of 210, 220, and 230 °C, and shear rates of 1 to 10000 per second. Results show that all polymers used have similar melt viscosities under normal extrusion conditions.
Physical and rheological properties results are explained in terms of polymer structures.
Recommended Content
Technical Paper | Fatigue Behavior Analysis and Durability Evaluation of Plastic Fuel Tank |
Aerospace Material Specification | POTTING COMPOUND, EPOXY Bisphenol A-Type Unfilled, Room Temperature Cure, Semiflexible |
Technical Paper | On the Injection Molding of Long Glass Fiber Filled Thermoplastic Test Specimens |
Authors
Citation
Abu-Isa, I., Khalid, S., DeBarr, G., and Zhi, S., "Mechanical, Thermal and Rheological Properties of Polymers Used in Plastic Fuel Tanks," SAE Technical Paper 2006-01-0333, 2006, https://doi.org/10.4271/2006-01-0333.Also In
References
- Aggarwal S.L. “Polymer Handbook” Brandrup J. Immergut, E.H. Wiley-Interscience Publication New York 1975 V-16
- “Thermoforming of EVAL Resin Containing Structures” EVAL Company of America July 2002
- “Mechanical, Optical and Miscellaneous Properties of EVAL Resins and Films EVAL Company of America July 2000
- Salame, M. J. Plastic Film Sheeting 2 321 1986
- Ito, K Lee, H-L Saito, Y Yamamoto, T Nishihara, Y. Ujihira, Y. Nomura, K Journal of Radioanalytical and Nuclear Chemistry 255 3 437 2003
- Kanekiyo, M. Kobayashi, M. Ando, I Kurosu, H Amiya, S Macromolecules 33 21 7971 2000
- Zhang, Z. Britt, I.J. Tung, M.A. Journal of Polymer Science: Part B: Polymer Physics 37 691 1999
- Samus, M.A. Rossi, G Macromolecules 29 2275 1996
- Mano, J.F. Vaz, C.M. Mendes, S.C. Reis, R.L. Cunha, A.M. Journal of Materials Science: Materials in Medicine 10 857 1999
- Ellis, T.S. Laverty, J.J. Lesinski, M.M. “Design and Manufacture for the Environment” SAE publication SP-1342 1998 37 45
- van der Vegt A.K. “From Polymers to Plastics” Deft University Press Netherlands 1999 52 64