This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Experimental Methods to Validate Residual Stress Models for Cast Aluminum Components
Technical Paper
2006-01-0324
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The prediction of residual stresses due to manufacturing is of high importance in product development. For the accurate prediction of residual stresses in metallic components, an understanding of the quenching process that occurs in many heat treatments is required. In this paper, the experimental techniques developed to quantify the temperature fields during quenching and to quantify the residual stresses in the quenched part are presented. The temperature fields were quantified using thermocouples embedded in the components. The residual stresses were quantified using a newly developed strain gauging, sectioning and dynamic data acquisition technique. The techniques were verified using thermal histories and residual stresses for an engine cylinder head quenched at two different quenchant temperatures. The measurements obtained were incorporated into an analytical program (finite element) to study the residual stresses produced during the quenching process. Good correlation between the experimentally measured residual stress and the analytical predictions was demonstrated.
Recommended Content
Technical Paper | Die Casting for Chassis Components |
Technical Paper | Direct Drive Friction Welding: A Comprehensive Mathematical Model |
Technical Paper | A Decade of Progress in Turbomachinery Design and Development |
Authors
Topic
Citation
Lasecki, J., Su, X., and Allison, J., "Development of Experimental Methods to Validate Residual Stress Models for Cast Aluminum Components," SAE Technical Paper 2006-01-0324, 2006, https://doi.org/10.4271/2006-01-0324.Also In
References
- Su X. Jan J. Lasecki J. Allison J. “Thermal and Residual Stress Analysis of an Engine Block with Cast-In Liners” Proceedings from 1st International Symposium on Metallurgical Modeling for Aluminum Alloys 13-15 Oct. 2003 Pittsburgh, Pennsylvania ASM International 2003 63 68
- Weiss U. Su X. Lasecki J. Allison J. “Residual stress analysis in engine cylinder head and block” Proceedings of Haus der Technik Nov. 26-27 2003 Essen, Germany
- Withers P. J. Bhadeshia H. K. D. Residual Stress - I & II; Measurement Techniques and Nature and Origins” Mat. Sci Tech 2001
- Borland D. W. “Residual stress measurement-Methods, Limitations and Significance” Australian Int. Conf. Surface Engineering March 1994 114 121
- Sakai K. J Iron & Steel Inst. 60 1974 1591 1598
- Denton A.A. Metall. Rev. 11 1966 1 23
- “Standard Test Method for Determining the Residual Stresses by the Hole-Drilling Method”
- Nishimura S. et al Japan Soc. Mech. Eng. 18 1975 116 122
- “Standard test method for determining the effective elastic parameter for X-Ray diffraction measurement of residual stress”
- Webster P. J. Wang X.D. Kang W. P. Mills G. “Experimental verification of residual stress models using neutron strain scanning” Proc. Conf. Modeling of Casting and Welding Processes VII, The Minerals, Metals and & Materials Society September 1995 311 318
- Schadler L. S. Galiotis C. Fundamental and applications of Micro-Raman Spectoscropy” Int. Material Reviews 40 1995 116 134
- Tanala E. et al. NDT & E International 28 2 83 88 1995
- Beck G. et.al Acad. Sci. Paris 265 1967 793 796
- Chervier J. C. et.al. Heat Mas Transfer Metall. Syst 1979 535 544
- Totten G. E. Dakins M. E. Heins R. W. J. Heat Treat. 6 1988 32 35
- Scott H. Trans. ASM 22 1934 68 98
- Trujillo D.M Walls R. A Ind. Heat. July 1989 22 24
- Pinto C. E. Jr. et. al “Statistical Approaches Applied to the Fatigue Test Data Analysis” SAE 2005-01-0802 SAE Warrendale PA 2005
- Godlewski L. et. al “A Test Method for Quantifying Residual Stress Due to Heat-Treatment in Metals SAE 2006