This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Surface Residual Stress in Automotive Components: Measurement and Effects on Fatigue Life
Technical Paper
2006-01-0323
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The effect of surface processing of automotive components was studied by X-ray diffraction (XRD) to investigate the relationship to component fatigue life. A new methodology was introduced to determine residual stress magnitudes and depth profiles of the residual stress distribution. Surface microstructural characteristics and weighted depths of penetration were taken into account to obtain accurate residual stress measurements and profiles. Residual stress profiles were used in AFGROW software to evaluate the effects of surface conditions on fatigue life and on the initial critical flaw size that can be tolerated in a component with given life requirements, subjected to various loading conditions. The method presented in this paper can be applied to measure residual stresses and evaluate numbers of cycles to failure and critical flaw sizes for components with various size/geometry/material, surface grain structure, degree of surface residual stress, and dynamic loading conditions.
Recommended Content
Authors
Citation
Lados, D., Nicolich, J., and Macchiarola, K., "Surface Residual Stress in Automotive Components: Measurement and Effects on Fatigue Life," SAE Technical Paper 2006-01-0323, 2006, https://doi.org/10.4271/2006-01-0323.Also In
References
- Wagner L. Lutjering G. Fatigue 87 Starke E.A. Ritchie R.O. EMAS 1987 1819 1828
- Wagner L. Mueller C. Materials & Manufacturing Processes 1992 7 3 423 440
- Wagner L. Lutjering G. Fatigue 90 Kitagawa H. Tanaka T. MCPF 1990 323 328
- Rudd C.O. Residual Stress Effects in Fatigue ASTM STP 776 ASTM Philadelphia, PA 1982 3 5
- Walker D. Adv. Mater. Processes 2001 Aug. 30 33
- Mordfin L. Residual Stress Effects in Fatigue ASTM STP 776 ASTM Philadelphia, PA 1982 6 12
- Noyan I.C. Cohen J.B. Residual Stress: Measurement by Diffraction and Interpretation Materials Research and Engineering Series Springer-Verlag New York Inc. 1987
- Jenkins R. Snyder R.L. Introduction to X-ray Powder Diffractometry John Wiley and Sons Inc. 1996
- Vermeulen A.C. Peak Shift Correction for Transparency in Classical XRD Residual Stress Methods Materials Science Forum 2001 378-381 166 171
- Delhez R. de Keijser Th.H. Mittelmeijer E.J. Surface Engineering 1987 3 331 342
- http://afgrow.wpafb.af.mil/downloads/afgrow/pdownload.php
- Lados D.A. Apelian D. Limitations of Elastic Definitions in Al-Si-Mg Cast Alloys with Enhanced Plasticity: Linear Elastic Fracture Mechanics versus Elastic-Plastic Fracture Mechanics Engineering Fracture Mechanics 2006 73 4 435 455
- Donald J.K. Bray G.H. Bush R.W. An Evaluation of the Adjusted Compliance Ratio Technique for Determining the Effective Stress Intensity Factor Panontin TL Sheppard SD Fatigue and Fracture Mechanics 29, ASTM STP 1332 ASTM Philadelphia, PA 1999 674 695
- Lados D.A. Apelian D. Paris P.C. Donald J.K. Closure Mechanisms in Al-Si-Mg Cast Alloys and Long-Crack to Small-Crack Corrections Int. J. Fatigue 2005 27 10-12 1463 1472